• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.64-64
• /
• 2000

The contributing proportion of the increase of port productivity is more increasing concerning not only the port industry, but also all the informations of container crane which is the representative equipment by the rapid increase of the volume of freight of port. The basic of rapid service is the improvement of the productivity, the information of operation as to the productivity of crane for the quick handling within yard and especially the informations of breakdown and to handle breakdown as soon as possible has a great effect on the increase of productivity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.452-461
• /
• 2007

Adaptive anti-sway and trajectory tracking control of overhead crane is presented, which utilizes Fuzzy Uncertainty Observer(FUO) and Fuzzy based Variable Structure Control(FVSC). We consider an overhead crane system which can be decoupled into the actuated and unactuated subsystems with its own lumped uncertainty such as parameter uncertainties and external disturbance. First, a new method for anti-sway control using FVSC is proposed to improve the conventional method based on Lyapunov direct method, while a conventional trajectory tracking control law using feedback linearization is directly adopted. Second, FUO is designed to estimate one of the two lumped uncertainties which can compensate both of them, based on the fact that two lumped uncertainties are coupled with each other. Then, an adaptive anti-sway control is proposed by incorporating the proposed FVSC and FUO. Under the condition that the observation error is Uniformly Ultimately Bounded(UUB) within an arbitrarily shrinkable region, the overall closed-loop system is shown to be Globally Uniformly Ultimately Bounded(GUUB). In addition, the Global Asymptotic Stability(GAS) of it is shown under the vanishing disturbance assumption. Finally, the effectiveness of the proposed scheme has been confirmed by numerical simulations.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.937-946
• /
• 2021

The floating crane is used to lift the heavyweight on the ocean. The floating crane has a winch system for lifting the heavyweight and the system is controlled by the winch control system. The heavyweight is lifted safely by control of the winch control system. Before the make the control system and controller, there are many restricted conditions to test and validate at design and development steps. In order to solve the problems, commonly use the HILS (Hardware-In-the-Loop-Simulation). HILS is the method of test and validation for the hardware control system. It can be composed of the control system in hardware with surrounding environments which is a virtual model. In this study, we developed the winch system model for HILS of the 150t winch control system in a floating crane. Through this simulation and winch model, it can be applied to HILS for the winch control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1287-1294
• /
• 2004

Automated container terminals have been being developed over the world for recent years and many countries are interested in it because the amount of containers exported or imported is rapidly increasing. The conventional container terminals were not designed to control this kind of heavily many containers. They would face many structural problems soon or later, although they have managed to do well so far. One of the most important things in developing automated container terminal is to develop the equipment able to handle many containers efficiently. Those are maybe automated transfer cranes, automatic guided vehicles, and automated quay-side cranes. The word 'automated' means the equipment is operated without drivers and those equipments are able to work without any interruption in working schedule. Through the researches on the conventional transfer cranes, we decided that the structure of the conventional transfer cranes is not efficient in automated container terminal and it's not possible to handle so many containers in limited time. Therefore we have been studying on the proper structure of the automated container crane for past several years and a new type of transfer crane has been developed. Design concept and control method of a new type of transfer crane had been presented in the previous paper: Part Ⅰ. Experimental features will be presented with a model transfer crane in this paper: Part Ⅱ.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2015

Objective: The aim of this study is to suggest the standard of the direction sign on the pendant switch of overhead cranes which can reduce human errors in control. Background: A great number of crane accidents occur in industries. One of the major causes of the accidents is the mistake in the control of cranes by confusing the orientation of crane movements. Nevertheless, three different direction sign styles, 'East, West, South, North (EWSN)', 'Forward, Backward, Left, Right (FBLR)', and arrows for four directions are used without standardization. Method: An overhead crane simulator was installed for a laboratory experiment. It could move along six directions by the control of a pendant switch. 90 participants were evenly assigned to the three different conditions of direction sign styles. The participants were asked to control the pendant switch according to the continuously appearing 16 direction signs on a monitor ahead. The participants were allowed to refer an orientation sign board on the ceiling representing correct movement directions of the overhead crane simulator. Results: The direction sign style, 'EWSN', showed statistically significant better performance in task completion time and number of errors than the other sign styles. The direction sign style, 'EWSN', adopting the cardinal direction system, made the participants clear in direction controls after customizing to the crane movements. However, the direction sign styles, 'FBLR' and the arrows adopting the relative direction system made conflicts in direction controls due to the egocentric view of human. Conclusion: The direction sign style, 'EWSN', is the most appropriate for the standardization of the direction sign on the pendant switch of overhead cranes. Application: The results of this study can be applied to the standardization of direction sign in the legal notification on the safety certifications of crane manufacturing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.5
• /
• pp.630-639
• /
• 1999

To achieve fast loading and unloading of containers from a container ship, quick suppression of the remaining sway motion of the container at the end of each trolley stroke is crucial. Due to the pendulum motion of the container and disturbances like sind, residual sway always exists at the end of trolley movement. In this paper, the sway-control problem of a container crane is investigated. A two-stage control is proposed. The first stage is a time optimal controlfor the purpose of fast trolley traveling. The second stage is a nonlinear control for the quick suppression of residual sway, which starts right after the first stage while lowering the container. The nonlinear control is investigated in the perspective of controlling an underatuated mechanical system, which combines partial feedback linearization to account for the known nonlinearities as much as possible, and variable structure control to account for the unmodeled dynamics and disturbances. Simulation and experimental results are provided.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.159-165
• /
• 1998

In this paper the sway-control problem of a container crane is investigated. The control loop is divided into two stages. The first stage is a modified time optimal control for trolley traversing. The velocity command for trolley traversing consists of three components ; a reference velocity and two feedback signals for compensating the deviations of trolley and sway angle from their desired trajectories. For trolley's exact positioning the trolley dynamics is identified via an error equation identifier structure. The second stage is a nonlinear residual sway control that starts at the end of first stage. The control design for the second stage is investigated from the perspective of controling an underactuated system, and the control law combines the feedback linearization and variable structure control.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.88-96
• /
• 2006

While the crane system operate in port, one of main objective is to transport containers to the goal position as soon as possible. Because this is one of the biggest problem in terms of productivity of port, the container crane is operated by an expert operator until now. However recently an automatic control system with high performance is required to improve the performance of the crane system and to make high productivity. Therefore we developed an optimal controller based on Humoral Immune Algorithm with PID controller. The proposed system has a real time structure and can improve the performance such as anti-sway problem. Some computer simulations are implemented to assess the characteristics of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2076-2080
• /
• 2005

Study in this paper concerns the optimal $H_{2}$ integral servo problems for linear crane model systems via the constraints of the derivatives of state variables added to the standard constraints. It is shown in the paper that the derivative state constrained optimal $H_{2}$ integral servo problems can be reduced to the standard optimal $H_{2}$ control problem. The main subject of the paper is to apply the results of derivative state constrained $H_{2}$ integral servo theorem in crane system. The effect of our proposed controller with respect to mitigate an under damping for crane model system is also verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.131-139
• /
• 1995

In this study, small size stacker Crane for automatic ware house and interface circuit is designed and manufactured. IBM-PC is used as a controller. At 50kg$_{f}$ load, optimal motion velocity is 20 mm/min for X and Y axis and 12 mm/min for Z axis. Position fesolution is 0.005 mm and repeatability is .+-. 0.025 mm. Through characteristic experiment, effectiveness of the designed and manufactured stacker crane. PC control program, and design of interface circuit and construction of control system are shown. From these results, the developed stacker crane can be apply to FMS(Flexible Manufacturing System) and FA(Factory Automation) of industrial field.d.