• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.471-478
• /
• 2011

콘크리트구조설계기준에서는 균열 검토시 설계의 간편함 때문에 철근 간격을 제한하는 간접 균열 제어 방법을 사용하고 있다. 뿐만 아니라 구조설계기준 부록에서는 균열폭을 산정하는 직접 균열 제어 방법도 제시하고 있다. 그러나 이러한 두 방법을 통한 균열 검증 결과에는 모순이 있다. 이 연구에서는 구조설계기준, 구조설계기준 부록 및 Frosch 제안식을 통해 최대 철근 간격을 산정하고, 콘크리트 압축강도, 단면 높이 그리고 피복 두께에 따른 차이를 분석하였다. 연구 결과 구조설계기준 본문과 구조설계기준 부록에 따른 최대 철근 간격에는 큰 차이가 있는 것으로 나타났다. 따라서 직접 균열 제어와 간접 균열 제어 사이에 일관성을 확보할 수 있는 합리적인 균열 검증 모델을 제안하였다.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.473-480
• /
• 1996

Automatic fatigue crack length measuring system using DC electrical potential method and the system control program for automatic fatigue testing under random load condition were made in this study. And using these system and control program, fatigue tests were executed under constant and random load condition. As the result, the propagation of crack in random loading can be represented Paris equaiton and log normal probability function. But constant and random load test show different crack propagation properties.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.118-121
• /
• 2000

CFRD (Concrete Faced Rockfill Dam) face slab concrete has a much capability to occur crack due to drying shrinkage, hydration heat and bas compaction etc. Because of crack of concrete induce structural problem and decrease durability of concrete, it is need to reduce crack of concrete. This is an experimental study to analyze the Control Property of Plastic Shrinkage Crack for CFRD face slab concrete. For this purpose, it was investigated and analyzed the engineering properties of plain concrete and using admixtures (polypropylene fiber, fly-ash) according to test result As the result, it was found that crack width and area of concrete using admixtures less than of plain concrete.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.301-307
• /
• 1998

The goal of this paper is to describe an advanced method of the fault diagnois using Control Theory with reference to a crack detection, a new way to localize the crack position under infulence of the plant disturbance and white measurement noise on a rotating shaft. As a first step, the shaft is physically modelled with a finite element method as usual and the dynamic mathematical model is derived from it using the Hamilton - principle and in this way the system is modelled by various subsystems. The equations of motion with crack is established by adaption of the local stiffness change through breathing and gaping from the crack to the equation of motion with un-damaged shaft. This is supposed to be regarded as reference for the given system. Based on the fictitious model of the time behaviour induced from vibration phenomena measured at the bearings, a nonlinear State Observer is designed in order to detect the crack on the shaft. This is elementary NL- observer(EOB). Using the elementary observer, an Estimator(Observer) Bank is established and arranged at the certain position on the shaft. In case a crack is found and its position is known, the procedure for the estimation of the depth is going to begin.

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.42-50
• /
• 1989

The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.87-98
• /
• 2011

철근콘크리트 부재의 균열은 필수불가결한 현상이다. 따라서 효과적으로 균열폭을 측정하기 위한 많은 경험식이 제시되었고, 또한 간편한 적용성 때문에 철근 간격과 직경의 제어를 통한 간접균열제어법이 제시되고 널리 사용되고 있다. EC2에서는 최대균열간격과 평균변형률의 곱으로 설계 균열폭을 산정한다. 이 연구에서는 재료 특성에 따른 최대철근간격과 최대철근직경을 산정하였다. 특히 인장증강효과 모델과 최대균열간격에 따른 영향을 분석하였고, 이를 콘크리트구조설계기준에서 제시한 값과 비교하였다. 해석 결과 인장증강효과 모델에 따라 큰 차이가 발생하였고, 2차식 형태의 인장증강효과 모델과 Part II의 최대균열간격을 사용함으로써 과소평가되었다. 따라서 2차식 형태의 인장증강효과 모델을 사용함으로써 합리적인 간접균열제어가 가능하다. 또한 이를 통해 휨부재의 사용성 검증에 일관성을 확보할 수 있을 것으로 판단된다. 이와 함께 균열제어를 위한 두 가지 모델을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제12권4호
• /
• pp.377-396
• /
• 2001

The excessive cracking of RC cantilever decks, which often requires special attention for structural engineers, is studied using a three-dimensional crack analysis model. The model is based on a fracture energy approach for analyzing cracks in concrete, and the numerical analysis is carried out using a modified load control method. The problem of excessive cracking is then studied with four different span-ratios. Based on the numerical results, the crack behavior with respect to the patterns of crack propagation, dissipation of the fracture energy, and effects on the structural integrity are discussed. The mechanisms which cause the excessive cracking are also explained.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.219-224
• /
• 2007

Recently, atmospheric contaminations has become worse due to the increased number of automobile. The PCV (Positive Crankcase Ventilation) valve acts as a flow control to allow re-combustion of blow-by gas by having it flow from a crankcase to an inlet manifold suction tube. Also, during the fabrication of the PCV valve, micro cracks may occur in the valve body and be extended under operation. The excessive stress distribution and crack initiation on the PCV valve body would bring an unstable blow-by gas flow rate control and would cause valve failure. The purpose of this study is to examine the crack affects on the stress and strain variations on the PCV valve according to the inlet and outlet manifold under differential pressures. From the results, we can explain the behavior of the crack extension for a safe condition of PCV valve.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.305-308
• /
• 2003

Recently, a structure has been large and high under the improvement of construction technique. So, mass concrete constructions that a mat foundation thickness of structure is over 80cm have been many. Also, in the reason of high strength of concrete, a matter of thermal crack became an important task to be solved. In this study, we executed temperature and stress analysis of mat foundation. And we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis program. Because of this analysis technique, we could control skilfully the quality of mat foundation in a construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.375-380
• /
• 2002

Tong-young LNG tank is a LNG storage tank of 140,000 kl, and it is composed of Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof. Generally, when concrete temperature arise, the complex thermal stress of inner and outer part can cause serious thermal crack and damage at structure. So in this paper, for the control of this thermal crack, we did the concrete mix design with the base of fly-ash 30% substitute at binder, and through the computer modelling at Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof, we studied the probability of thermal crack by thermal crack index.