• 생물환경조절학회지
• /
• 제25권4호
• /
• pp.288-293
• /
• 2016

본 연구는 복숭아 주간부 동해 예방을 위한 피복재의 보온성을 평가하기 위해 백색부직포, 황색일반지, 방수패드로 만들어진 피복재의 물리적 특성 및 보온성을 평가하고 실제 겨울철 복숭아 주간부 보온효과를 구명하여 피복재로서의 이용가능성을 검토하기 위해 수행하였다. 세 피복재 중 2겹방수패드 처리가 보온율과 열저항성이 가장 우수하였다. 2겹방수패드 처리의 주간단열효과는 $14.09^{\circ}C$ 만큼 온도상승을 차단하였고, 야간보온효과는 $7.23^{\circ}C$ 만큼 온도하강을 차단하여 보온효과가 가장 우수함을 확인하였다. 따라서 방수패드 재질을 보온피복재로 개발 보급할 경우 복숭아 주간부 동해 피해를 경감시키는데 도움을 줄 수 있을 것으로 생각되었다.

• 해양환경안전학회지
• /
• 제12권2호
• /
• pp.107-113
• /
• 2006

정수장 슬러지는 수 처리 역 세척 과정에서 발생되는데, 기계적인 방법 또는 자연건조방법으로 탈수된 후 주로 해양투기, 매립등의 방법으로 처리한다. 최근에는 런던협약에 의해 해양투기가 상당히 제약을 받고 있다. 탈수된 정수장 슬러지를 위생매립장의 복토재로서의 활용가능성을 파악하기 위하여 실내실험을 통하여 정수장슬러지의 물리 화학적 특성과 지반공학적 특성을 파악하였다. 슬러지의 지반공학적 특성을 향상시키기 위하여 슬러지에 일반토사를 혼합한 시료에 비중계실험, 액 소성한계실험 비중실험, 다짐실험. 일축압측 실험등을 실시하였다. 슬러지에 일반토사를 혼합한 혼합토는 정수장슬러지와 비교하여 최대건조단위증량은 증가하고, 최적함수비는 감소하였고, 최대압축응력과 마찰각을 증가한 반면 점착력은 감소하였다. 미국환경청의 복토재 기준을 확보하기 위해서 슬러지와 일반토사를 3:7로 혼합하여야 하며, 혼합토의 압축강도는 $3.6kg/cm^2$이다.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.83-92
• /
• 2018

This paper investigated garment formability and fabric mechanical properties of one-way and two-way stretch fabrics according to the thermal treatment methods. One-way and two-way stretch fabrics were woven using 75d and 150d PET/spandex covering yarns and then these were wet thermal treated with four kinds of finishing machines. The fabric mechanical properties of these stretch fabrics specimens were measured and compared with the regular PET fabrics. The stretch ratio of one-way stretch fabric was ranged 12 to 26 percentage, 15 to 45 percentage for 2-way stretch fabrics and 4 to 10 percentage for regular fabrics. Garment formability of stretch fabric was superior than that of regular fabrics, in addition, 2-way stretch fabric was better than one-way. The garment formability of the stretch fabrics treated with CPB and Lava wet thermal machines showed the highest values, and the stretch ratio of these 2-way stretch fabrics was also the highest, which was ranged 20 to 45 percentage. This phenomenon was assumed to be due to high extensibility and bending rigidity with low shear modulus of the 2-way stretch fabric treated with CPB and Lava wet thermal machines. It was shown that the garment formability of stretch fabrics treated without dry thermal treatment was higher than that of dry thermal treated fabrics. It revealed that high stretch fabric was available under the condition of low process tension in the wet and dry thermal treatments of the finishing process, which makes high garment formability.

• Composites Research
• /
• 제28권5호
• /
• pp.249-253
• /
• 2015

본 연구는 탄소섬유 펼침 기술을 이용한 적층 복합재료의 특성을 평가하였다. 섬유 펼침 기술이 적용되어 기존 12 K 탄소섬유 토우의 폭이 7 mm에서 20 mm로 늘어나면서 두께가 더 얇아졌다. 폴리프로필렌 필름을 spread tow에 함침시켜 프리프레그를 만들고 이를 적층 후 열압축 성형을 통해 시편을 제조하였으며 이들의 기공함유량 및 인장, 굴곡 시험을 통해 물리적, 기계적 물성을 평가하였다. 그 결과, 탄소섬유 펼침 기술이 적용된 적층 복합재료의 기공함유량이 기존의 섬유 토우를 사용한 것보다 작게 나타났고, 섬유함유량이 낮았음에도 불구하고 기계적 물성이 향상됨을 알 수 있었다.

• 한국재료학회지
• /
• 제17권2호
• /
• pp.68-72
• /
• 2007

Optimum compositions for piezoelectric properties of $(Bi_{0.5}Na_{0.5})_{(1-x)}Ba_xTiO_3$ ceramics were investigated in the range of $x=0{\sim}0.1$ covering rhombohedral to tetragonal phase regions. No impurity phases other than a perovskite phase were found and the grain size decreased with increasing x. A two-phase coexisting morphotropic phase area rather than boundary dividing rhombohedral and tetragonal phase regions appeared to exist at $x=0.05{\sim}0.08$. As for piezoelectric properties within morphotropic phase compositions, the piezoelectric constant ($d_{33}$) and the electromechanical coupling factor ($K_p$) showed peak values at x=0.065, 192 pC/N and 34%, respectively, indicating x=0.065 as an optimum composition for piezoelectric $(Bi_{0.5}Na_{0.5})_{(1-x)}Ba_xTiO_3$ ceramics.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.553-559
• /
• 2022

필름의 멀칭 기술은 토양 표면을 덮어 토양 온도와 수분을 조절하고, 잡초를 억제하는 기능에 사용된다. 본 연구에서는 생분해성 멀칭필름의 내가수분해성 및 기계적 물성을 향상시키기 위하여 PBAT(Poly Butylene Adipate-co-Terephthalate)와 PLA(Poly Lactic Acid)를 이축 압출기를 사용하여 개질한 후, 필름의 물성과 생분해 특성을 조사하였다. 멀칭필름을 토양에 매립 후 기간별 필름의 중량감소를 확인하였고, 건답에서 벼농사용 멀칭 후 식물의 성장을 관찰하였다. 내가수분해성이 향상된 멀칭 필름은 작물의 성장에 우수한 특성을 나타냈으며, 생분해되는 멀칭 필름은 환경 친화적이고 효율적이며, 지속가능한 농업관행을 위한 새로운 대안으로써의 가능성을 제공 할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.62-62
• /
• 1999

Carbon based materials have many attractive properties such as a wide band gap, a low electron affinity, and a high chemical and mechanical stability. Therefore, researches on the carbon-based materials as field emitters have been drawn extensively to enhance the field emission properties. Especially, diamond gives high current density, high current stability high thermal conductivity durable for high temperature operation, and low field emission behaviors, Among these properties understanding the origin of low field emission is a key factor for the application of diamond to a filed emitter and the verification of the emission site and its distribution of diamond is helpful to clarify the origin of low field emission from diamond There have been many investigations on the origin of low field emission behavior of diamond crystal or chemical vapor deposition (CVD) diamond films that is intentionally doped or not. However, the origin of the low field emission behavior and the consequent field emission mechanism is still not converged and those may be different between diamond crystal and CVD diamond films as well as the diamond that is doped or not. In addition, there have been no systematic studies on the dependence of nondiamond carbon on the spatial distribution of emission sites and its uniformity. Thus, clarifying a possible mechanism for the low field emission covering the diamond with various properties might be indeed a difficult work. On the other hand, it is believed that electron emission mechanisms of diamond are closely related to the emission sites and its distributions. In this context, it will be helpful to compare the spatial distribution of emission sites and field emission properties of the diamond films prepared by systematic variations of structural property. In this study, we have focused on an understanding of the field emission variations of structural property. In this study, we have focused on an understanding of the field emission mechanism for the CVD grown undoped polycrystalline diamond films with significantly different structural properties. The structural properties of the films were systematically modified by varying the CH4/H2 ratio and/or applying positive substrate bias examined. It was confirmed from the present study that the field emission characteristics are strongly dependent on the nondiamond carbon contents of the undoped polycrystalline diamond films, and a possible field emission mechanism for the undoped polycrystalline diamond films is suggested.

• 천문학회보
• /
• 제40권1호
• /
• pp.79.1-79.1
• /
• 2015

We describe our ongoing project, Intensive Monitoring Survey of Nearby Galaxies. This survey is designed to study transients such as Supernovae (SNe) in nearby galaxies. Our targets are UV-bright (MUV < -18.4) and nearby (d < 50 Mpc) 50 galaxies selected from a GALEX catalog, whose star formation rates are larger than normal galaxies. High star formation in these galaxies ensures that core-collapse supernova explosions occur more frequently in them than normal galaxies. By monitoring them with a short cadence of a few hours, we expect to discover 5 SNe/yr events. Most importantly, we hope to construct very early light curves in rising phase for some of them, which enables us to understand better the physical properties of progenitor star and the explosion mechanism. To enable such a high cadence observation, we constructed a world wide telescope network covering northern, southern hemisphere distributed over a wide range of longitudes (Korea, US, Australia, Uzbekistan and Spain). Data reduction pipe line, detection and classification algorithms are being developed for an efficient processing of the data. Using the network of telescopes, we expect to reach observe not only SNe but also other transients like GRBs, Asteroid, variable AGNs and gravitaional wave optical counter part.

• ETRI Journal
• /
• 제27권3호
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1229-1234
• /
• 2004

Face robots capable of expressing their emotional status, can be adopted as an e cient tool for friendly communication between the human and the machine. In this paper, we present a face robot actuated with arti cial muscle based on dielectric elastomer. By exploiting the properties of polymers, it is possible to actuate the covering skin, and provide human-like expressivity without employing complicated mechanisms. The robot is driven by seven types of actuator modules such as eye, eyebrow, eyelid, brow, cheek, jaw and neck module corresponding to movements of facial muscles. Although they are only part of the whole set of facial motions, our approach is su cient to generate six fundamental facial expressions such as surprise, fear, angry, disgust, sadness, and happiness. Each module communicates with the others via CAN communication protocol and according to the desired emotional expressions, the facial motions are generated by combining the motions of each actuator module. A prototype of the robot has been developed and several experiments have been conducted to validate its feasibility.