• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.417-418
• /
• 2010

본 연구는 3시간 내화실험으로 고강도콘크리트의 화재저항성을 파악하는데 그 목적이 있다. 섬유의 종류(폴리프로필렌, 나일론)와 콘크리트 피복두께(40mm, 50mm, 60mm)를 조절하여 실험을 하였다. 실험결과 충분한 양의 섬유를 혼입하였을 때 폭렬 저항성을 갖는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.408-415
• /
• 1997

Bond strength of reinforcing bar to high-performance concrete using Belite cement is explored using beam end test specimen. The key parameters for the bond test are slump of concrete, top bar effect, and strength of concrete in addition to concrete covers. Specimen failed in the typical brittle bond failure splitting the concrete cover as the wedging action. The test results show that for the group with portland cement I using superplasticizer additional slump does not decrease the bond strength of the top bar is less than bond strength of bottom bar, but the top bar factor satisfy the modification factor for top reinforcement. The result also show that bond strength is function of square root of concrete compressive strength and cover thickness. More detailed evaluation will be conducted from the test specimen with high strength concrete using the belite cement.

• 태양에너지
• /
• 제5권2호
• /
• pp.60-69
• /
• 1985

A low cost batch type solar heaters (capacity 200 litres) comprising horizontal tanks, which performs the dual function of absorbing heat and storing the heated water, have been designed and fabricated for the purpose of side-by-side testing. Experimental results have indicated that the sufficient hot water can be obtained in the early morning if the glazing is aided by a reflector/insulation cover. The water heater with best thermal performance such as type B supplied water at a maximum mean temperature of $46-49^{\circ}C$ in the summer afternoon and the temperature of $36-39^{\circ}C$ can be obtained in the early morning if insulation cover is used during night time. The equation has been developed for the prediction of hourly variation of the water temperature in the tank.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• 대한설비공학회지:설비저널
• /
• 제6권4호
• /
• pp.255-261
• /
• 1977

This study was concerned with the performance of solar air heater using parallel channels. Heat transmission model was developed and fabricated to increase the economic feasibility for solar heating system by using the cheap zinc plate. The prformance was discussed as a function of mass flow rate, and plate, inlet and outlet temperatures. Experimental results show that heat transmission model is sufficient for the analysis of thermal characteristics of air heater and collection efficiency is better than the domestic water heater, as the range 32-49 percent. Collection efficiency in the 2 layers of glass cover is better than that in 1 layer, so it is considered better to use the 2 layers of glass cover during the cold winter season in Korea.

• Journal of applied mathematics & informatics
• /
• 제42권3호
• /
• pp.471-481
• /
• 2024

In this paper, the concept of D-sets will be applied to create D-lindelöf spaces, a new type of topological space covering the property. This is performed by using a D-cover, which is a special type of cover. The primary purpose of this work is to introduce the principles and concepts of D-lindelöf spaces. We look into their properties as well as their relationships with other topological spaces. The basic relationship between D-lindelöf spaces and lindelöf spaces, as well as many other topological spaces, will be given and described, including D-compact, D-countably compact, and D-countably lindelöf spaces. Many novel theories, facts, and illustrative and counter-examples will be investigated. We will use several informative instances to explore certain of the features of the Cartesian product procedure across D-lindelöf spaces as well as additional spaces under more conditions.

• 대한원격탐사학회지
• /
• 제28권4호
• /
• pp.409-420
• /
• 2012

산업혁명 이후 대기 중 이산화탄소 농도는 증가하고 있으며 이는 기후변화로 나타나고 있다. 본 연구에서는 기후변화에 의한 영향을 파악하기 위하여 원격탐사를 이용하여 만년설의 시계열 변화를 정량적으로 분석하고, 종설되는 시점을 통계적으로 예측하고자 한다. 연구지역은 아프리카 탄자니아의 킬리만자로 만년설이다. 1984년 6월부터 2011년 7월까지 전체 27년간 23장의 Landsat-5 TM 및 Landsat-7 ETM+ 자료를 사용하였다. 연구를 위하여 첫째, COST 대기보정 모델을 이용하여 각 영상들의 대기보정을 수행하였다. 둘째, NDSI(Normalized Difference Snow Index) 알고리즘을 이용하여 만년설 면적을 추출하였다. 셋째, SRTM DEM을 이용하여 만년설의 최저고도를 추출하였다. 마지막으로, 일차함수 형태의 추세선을 활용하여 종설 시점을 예측하였다. 분석은 23장 전부를 활용한 것과 건기에 촬영된 17장만을 활용한 것으로 나누어 분석하였다. 분석결과 면적은 27년 동안 약 $9.01km^2$에서 약 $2.54km^2$로 약 $6.47km^2$ 감소하였고, 이는 약 73% 면적의 감소를 의미한다. 최저고도는 27년 동안 약 4,603 m에서 4,893 m로 약 290 m 상승하였다. 추세선을 활용한 결과 면적은 매년 건기에 $0.342km^2$, 전체적으로 $0.421km^2$씩 감소하고 있으며, 최저고도는 매년 건기에 9.848 m, 전체적으로 11.251 m씩 상승하고 있는 것으로 나타났다. 면적 감소량을 통해 종설 시점을 예측한 결과 95% 신뢰도에서 2020년에 완전히 사라질 것으로 분석되었다. 이 연구는 적설지역의 변화를 통하여 전 지구의 기후변화를 모니터링할 수 있다는 근거를 제시했으며, 향후 연구지역 또는 유사 지역의 만년설 현황을 파악하는데 참고 자료로서 활용될 수 있을 것이다.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.437-444
• /
• 2008

Land-use or land-cover classification of satellite images is one of the important tasks in remote sensing application and many researchers have tried to enhance classification accuracy. Previous studies have shown that the classification technique based on wavelet transform is more effective than traditional techniques based on original pixel values, especially in complicated imagery. Various basis functions such as Haar, daubechies, coiflets and symlets are mainly used in 20 image processing based on wavelet transform. Selecting adequate wavelet is very important because different results could be obtained according to the type of basis function in classification. However, it is not easy to choose the basis function which is effective to improve classification accuracy. In this study, we first computed the wavelet coefficients of satellite image using ten different basis functions, and then classified images. After evaluating classification results, we tried to ascertain which basis function is the most effective for image classification. We also tried to see if the optimum basis function is decided by energy parameter before classifying the image using all basis functions. The energy parameters of wavelet detail bands and overall accuracy are clearly correlated. The decision of optimum basis function using energy parameter in the wavelet based image classification is expected to be helpful for saving time and improving classification accuracy effectively.

• 한국게임학회 논문지
• /
• 제12권5호
• /
• pp.35-42
• /
• 2012

플레이어의 게임공간에 대한 상호작용이 타 장르에 비해 직접적인 FPS게임은 특정 테마를 바탕으로 공간에서의 유리한 지점 확보 및 적의 제거가 주된 플레이이다. 본 논문은 근미래전테마 위주의 Hullett과 Whitehead 연구의 10가지 패턴을 기준으로 과거전, 현대전, 근미래전 3가지 테마에 대한 9종의 FPS게임 디자인패턴을 분석하였다. 그 결과, 10가지의 패턴 외에 주류 패턴으로써 '엄폐물 요소'의 중요한 역할을 발견하였고 '엄폐물 요소'의 패턴 속성을 분석하여 레벨디자인을 위한 효율적인 엄폐물 패턴의 활용방법을 제시하였다. 이러한 결과는 테마에 따른 FPS게임의 레벨디자인을 위한 실증적인 가이드라인으로 활용 될 수 있다.

• 한국의류학회지
• /
• 제24권7호
• /
• pp.1044-1055
• /
• 2000

The purpose of this study is to suggest sizing chart for a clean room wear. 3 control dimensions(Stature, Bust girth, B.N.P.∼Wrist point length) were chosen as 3 axes of clean room wear size chart. A loss function was used to determined intervals of stature, Bust girth and B.N.P.∼Wrist point length of size chart, because the loss function introduces the concept of frequency to size chart for better customer's size satisfaction. From the size table whose intervals had been determined by a loss function. The 4 sizes individually were suggested for clean room wear size chart by sex. The 3 sizes individually were suggested for clean room head cover size chart by sex too. The suggested size chart would be considered more feasible than present size chart. Also they are suggested supply reference measurement chart relevant to clean room wear manufacturing for 13 most frequent sizes.