• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.1
• /
• pp.11-23
• /
• 2010

A sacrificial member with aluminum foam of excellent energy absorption capacity was proposed for the protection of significant structures. Parametric studies of explicit finite element analyses were performed to investigate the pressure mitigation of close-range air-blasts. The scaled distance of the blast had a range of Z=0.48~0.95 and an empirical blast load function was utilized. The analytical parameters of the aluminum foam were density, thickness and the existence of a cover sheet. Analytical results showed that the transmitted pressure can be controlled to have a similar level of yield values of the foam by using a foam with low density and higher thickness. As the blast load increased, the sacrificial member needed to have higher density and thickness. A cover sheet of the foam clearly showed its effect on the wider distribution of blast pressure. It is necessary to determine the design parameters of sacrificial foams considering different energy dissipation capacities according to the scaled distance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.23-30
• /
• 2012

This paper proposes an improved steganalysis method to detect the existence of secret message. Firstly, we magnify the small stego noise by multiplying the speckle noise to a given image and then we estimate the denoised image by using the soft thresholding method. Because the noises are not perfectly eliminated, some noises exist in the estimated cover image. If the given image is the cover image, then the remained noise will be very small, but if it is the stego image, the remained noise will be relatively large. The parent-child relationship in the wavelet domain will be slighty broken in the stego image. From this characteristic, we extract the joint statistical moments from the difference image between the given image and the denoised image. Additionally, four statistical moments are extracted from the denoised image for the proposed steganalysis method. All extracted features are used as the input of MLP(multilayer perceptron) classifier. Experimental results show that the proposed scheme outperforms previous methods in terms of detection rates and accuracy.

• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.31-36
• /
• 2010

Purpose: The primary goal of palatoplasty is to enable normal speech with harmonious growth of face. Some children who had palatoplasty display typical findings of transverse maxillary deficiency requiring orthodontic widening of the maxilla. Levi (2009) described a cleft palate repair coupled with pedicled buccal fat pad flaps to cover bone exposed areas of the hard palate. Hence we report clinical experiences of cleft palate repair using pedicled buccal fat pad flap. Methods: Four Veau class II and a Veau class I cleft palate patients underwent palatoplasty with buccal fat pad flap by single surgeon from April 2009 to August 2009. Two patients received 2-flap palatoplasty and three patients 1-flap palatoplasty, respectively. After the cleft palate repair, sharp mosquito scissors was placed in the superior buccal sulcus just lateral to the maxillary tuberosity and inserted directly through the mucosa resulting in buccal fat pad extrusion. The elevated flap was moved to cover mucoperiosteal defect in hard palatal area. Results: Five patients underwent primary palatoplasty using buccal fat pad flap. Flap harvest and inset took on average 9 minutes per flap. Mucosal epithelization took 18 days on average. No patients had complications related to the buccal fat pad flap. Conclusion: Buccal fat pad pedicled flap has significant potential to function as an added vascularized tissue layer in cleft palate repair and we can expect better growth of maxilla with this method although longer duration of follow-up was unavailable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1938-1962
• /
• 2015

Security of information during transmission is a major issue in this modern era. All of the communicating bodies want confidentiality, integrity, and authenticity of their secret information. Researchers have presented various schemes to cope with these Internet security issues. In this context, both steganography and cryptography can be used effectively. However, major limitation in the existing steganographic methods is the low-quality output stego images, which consequently results in the lack of security. To cope with these issues, we present an efficient method for RGB images based on gray level modification (GLM) and multi-level encryption (MLE). The secret key and secret data is encrypted using MLE algorithm before mapping it to the grey-levels of the cover image. Then, a transposition function is applied on cover image prior to data hiding. The usage of transpose, secret key, MLE, and GLM adds four different levels of security to the proposed algorithm, making it very difficult for a malicious user to extract the original secret information. The proposed method is evaluated both quantitatively and qualitatively. The experimental results, compared with several state-of-the-art algorithms, show that the proposed algorithm not only enhances the quality of stego images but also provides multiple levels of security, which can significantly misguide image steganalysis and makes the attack on this algorithm more challenging.

• Journal of the Korean housing association
• /
• v.17 no.2
• /
• pp.125-134
• /
• 2006

The tightness of windows have devoted to the improvement of thermal insulation and energy saving in buildings. But it is known that this tightness causes some side effects such as low ventilation, low capacity to humidity and temperature control and these are not profitable for inhabitants. To act on these side effects, Korean traditional windows which are composed of Han-Ji(Koreand traditional paper) and Chang-Sal(Korean traditional wooden frame) have been studied to get a reasonable solutions for these problems. In this study, to compare the thermal and humidity control performance of current window(12 mm pair) and Korean traditional windows, frames which are made of existing window and Korean traditional windows are adapted to scale model house and then humidity and temperature of in and out of scale model house are measured and analysed. The results of this study are followings ; 1) When Korean traditional window charges 20cm(1/8 of total window area) from total window area, Han-Ji window has higher thermal insulation than that of existing window in daytime. There is the most big thermal difference when double faced with double-ply Han-Ji window is placed to mock-up house. In night-time, the temperature difference is very small so this means that Korean traditional window is good to cover direct sunlight in daytime and reduce the temperature of balcony. One faced with one-ply han-Ji window has the best humidity penetration performance among three type of Korean traditional windows. 2) When Korean window area enlarged to 40cm(1/4 of total window area), the function of 40cm width Han-Ji window is higher than that of 20cm's. This means that enlargement of Han-Ji window cover direct sunlight more and is more efficient in humidity penetration.

• Korean Journal of Remote Sensing
• /
• v.25 no.4
• /
• pp.375-381
• /
• 2009

In this paper, synthetic aperture radar (SAR) clutter images are simulated based on the extensive analyses for radar backscatter characteristics of various earth surfaces, and the simulated images are compared with measured SAR images. At first, the surface parameters including soil moisture content and surface roughness parameters and other parameters for vegetation canopies are measured for various surfaces. The backscattering coefficients for the surfaces are computed using theoretical and empirical models for surface scattering and the radiative transfer for vegetation-canopy scattering. Then, the digital elevation map (DEM) and land cover map (LCM) are used for the SAR image generation. The SAR impulse response (correlation function) is also employed to simulated reliable SAR images. Finally, the appropriate speckle and texture parameters for various earth surfaces are used for generating the SAR clutter images.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.537-547
• /
• 2010

The importance of vegetation in studies of global climate and biogeochemical cycles is well recognized. Especially. the FPAR (fraction of photosynthetically active radiation) is one of the important parameters in ecosystem productivity and carbon budget models. Therefore, accurate estimates of vegetation parameters are increasingly important in environmental impact assessment studies. In this study, optical FPAR using the Terra MODIS (MODerate resolution Imaging Spectroradiometer), SPOT VEGETATION and ECOCLIMAP data reproduced on the Korean peninsula. We applied the empirical method which is usually estimated as a linear or nonlinear function of vegetation indices. As results, we estimated the accurate expression which is 0.9039 of $R^2$ in cropland and 0.7901 of $R^2$ in forest. Finally, this study could be demonstrated to calibrate that produced FPAR while the overall pattern and random noise through the comparative analysis of FPAR on the reference data. Optimal use of input parameter on the Korean peninsula should be helping the accuracy of output as well as the improved quality of research.

• Journal of Digital Convergence
• /
• v.6 no.3
• /
• pp.45-52
• /
• 2008

For the domestic digital contents, it is particularly important that the planning and mediating functions should cover the whole Industries so that dividends and assistance to reach all the way back to the primary contents-creating level, where economic risks are especially high. A proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We can broadly define cooperation frameworks into two; one between the central and the local governments and another among private-sector groups, such as companies, associations and groups. These players in the framework have differing, sometimes, conflicting views regarding the digital contents industry whether the digital contents should aim for skilled applicability or the abstract or whether the emphasis should rest on public interest or profitability. Immature competition and lack of trust among these players also give rise to such inefficiencies as overlap in investments, inexpertness and inefficient use of resources. We have proposed and realized the National Integrated Cooperation System to bridge these gaps among the major players in the industry. The National Integrated Cooperation System rests on the following major functions. The first major function of the NICS is to decipher any ambiguity that may be embedded in external Inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our NICS has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. NICS has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.

• Smart Structures and Systems
• /
• v.4 no.3
• /
• pp.343-365
• /
• 2008

In this study, the frequency domain method which utilizes the evaluation of changes in the structural mode shape is adopted to identify regions which contain localized damages. Frequency response function (FRF) values corresponding to the modal frequency, analogous to the mode shape coefficients, are used since change in natural frequency of the system is usually insignificant for localized damage. This method requires only few sensors to obtain the dynamic response of the structure at specific locations to determine the FRF via fast-Fourier transform (FFT). Numerical examples of an aluminum plate, which includes damages of varying severity, locations and combinations of multiple locations, are presented to demonstrate the feasibility of the method. An experimental verification of the method is also done using an aluminum plate with two different degrees of damage, namely a half-through notch and a through notch. The inconsistency in attaining the FRF values for practical applications due to varying impact load may be overcome via statistical averaging, although large variations in the loading in terms of the contact duration should still be avoided. Nonetheless, this method needs special attention when the damages induce notable changes in the modal frequency, such as when the damages are of high severity or cover more extensive area or near the boundary where the support condition is modified. This is largely due to the significant decrease in the frequency term compared to the increase in the vibration amplitude. For practical reasons such as the use of limited number of sensors and to facilitate automation, extending the resolution of this method of identification may not be efficient. Hence, methods based on wave propagation can be employed as a complement on the isolated region to provide an accurate localization as well as to trace the geometry of the damage.

• 한국디지털정책학회:학술대회논문집
• /
• 2006.06a
• /
• pp.379-390
• /
• 2006

For the domestic digital contents, it is particularly important that the planning and mediating functions should cover the whole industries so that in order for dividends and assistance to reach all the way back to the primary contents-creating level, where economic risks are especially high. A proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We can broadly define cooperation frameworks into two; one between the central and the local governments and one among private-sector groups, such as companies, associations and groups. These player sin the framework have differing, sometimes, conflicting views regarding the digital contents industry whether the digital contents should aim for skilled applicability or the abstract or whether the emphasis should rest on public interest or profitability. Immature competition and lack of trust among these players also give rise to such inefficiencies as overlap in investments, inexpertness and inefficient use of resources. We have proposed and realized the National Integrated Cooperation System to bridge these gaps among the major players in the industry. The National Integrated Cooperation System rests on the following major functions. The first major function of the NICS is to decipher any ambiguity that may be embedded in external inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our NICS has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. NICS has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.