• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.151-163
• /
• 2006

Although various methods for effective modeling of pre-reinforced zones have been suggested for numerical analysis of large section tunnels, tunnel designers refer to empirical cases and literature reviews rather than engineering methods because ones who use commercial programs are unfamiliar with a macro-scale approach in general. Therefore, this paper suggests a simple micro-scale approach combined with the macro-scale approach to determine equivalent design parameters for effective numerical modeling of pre-reinforced zones in tunnel. This new approach is to determine the equivalent stiffness of pre-reinforced zones with combination of ground, bulb, and steel in series or/and parallel. For verification, 3-D numerical results from the suggested approach are compared with those of a realistic model. The comparison suggests that two cases make best approximation to a realistic solution: One is related to the series-parallel stiffness system (hereafter SPSS) in which bulb and steel are coupled in parallel and then connected to the ground in series, and the other is the series stiffness system (hereafter SSS) in which only bulb and steel are coupled in series. The SPSS is recommended for stiffness calculation of pre-reinforced zones because the SSS is inconvenient and time-consuming. The SPSS provides slightly bigger vertical displacement at tunnel crown in weathered rock than other cases and give almost identical results to a realistic model for horizontal displacement at tunnel spring line and ground surface settlement. Displacement trends on weathered rock and weathered soil are similar. The SPSS which is suggested in this paper represents the behavior mechanism of pre-reinforced area effectively.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.345-355
• /
• 2007

During winter, the CWR (continuous welded rail) may be broken when a temperature drop below the neutral level changes the axial force, causing tensile fracture and creating a rail gap. The passage of a train on a rail with an open gap may lead to very costly derailments. In this paper, the use of a track-and-train-coupled model whose rail has an open gap is proposed for dynamic interaction analysis. Linear track and train systems were coupled in this study by a nonlinear Herzian contact spring, and the complete system matrices of the total track-train system were constructed. Moreover, the interaction phenomenon considering the presence of an open gap in the rail was toughly defined by assigning the irregularity functions between the two sides of the gap. Time history analysis, which has an iteration scheme such as the Newmark-$\beta$ method (based on the Modified Newton-Raphson methods), was conducted to solve the nonlinear equation. .Finally, numerical studies were conducted to assess the effect of the various parameters of the system when applied to various speeds, open-gap sizes, and support stiffnesses of the rail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.895-904
• /
• 2008

CWR (Continuous Welded Rail) may be broken when a temperature drop below the neutral temperature changes in axial force, causing tensile fracture and rail gap, in winter. Rail-breaks may lead to the damage of the rail and wheel by dynamic load, and the reduction of running safety if not detected before the passage of a train. In this study, the track and train coupled model with open gap for dynamic interaction analysis, is proposed. Linear track and train systems is coupled by the nonlinear Herzian contact spring and the complete system matrices of total track-train system is constructed. And the interaction phenomenon considering open gap, was defined by assigning the irregularity functions between the two sides of a gap. Time history analysis, which have an iteration scheme such as $Newmark-{\beta}$ method based on Modified Newton-Raphson methods, was performed to solve the nonlinear equation. Finally, numerical studies are performed to assess the effect of various parameters of system, apply to various speeds, open gap size and the support stiffness of rail.

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.17-23
• /
• 2024

This study analyzes the thermal effects on the performance of an air foil thrust bearing (AFTB) using COMSOL Multiphysics to approximate actual bearing behavior under real conditions. An AFTB is a sliding-thrust bearing that uses air as a lubricant to support the axial load. The AFTB consists of top and bump foils and supports the rotating disk through the hydrodynamic pressure generated by the wedge effect from the inclined surface of the top foil and the elastic deformation of the bump foils, similar to a spring. The use of air as a lubricant has some advantages such as low friction loss and less heat generation, enabling air bearings to be widely used in high-speed rotating systems. However, even in AFTB, the effects of energy loss due to viscosity at high speeds, interface frictional heat, and thermal deformation of the foil caused by temperature increase cannot be ignored. Foil deformation derived from the thermal effect influences the minimum decay in film thickness and enhances the film pressure. For these reasons, performance analyses of isothermal AFTBs have shown few discrepancies with real bearing behavior. To account for this phenomenon, a thermal-fluid-structure analysis is conducted to describe the combined mechanics. Results show that the load capacity under the thermal effect is slightly higher than that obtained from isothermal analysis. In addition, the push and pull effects on the top foil and bump foil-free edges can be simulated. The differences between the isothermal and thermal behaviors are discussed.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.83-91
• /
• 2000

The first Procedure to identify structural system by using measured data is transformation of data to frequency domain and try to recognize modal characteristics in graphical condition. Those methods are doubted about the reliability to the civil structures, especially bridges which has coupled and close modal characteristics. In this paper, feasibility of time domain modal Identification methods were examined and applied double least square method to overcome bias characteristics of the identification methods. To show the advantage of proposed method, simulation were carried out for mass-spring model. And to examine the usage of the method in realistic case, sensitivity of the methods to noise was performed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.21-30
• /
• 1989

In this study, the dynamic behavior of a continuous bridge under moving load is studied considering roughness of the road surface. Vehicle model includes the spring effects of axes, and due to these effects, equations of motions for the vehicle and bridge are derived in coupled form. And then iteration method is used to solve the equations. In experimental study a bridge model is constructed considering the similarity rule in order that the model exhibits dynamic behavior similar to that of prototype. Three types of roughness such as uneven random roughness, uplift on the approach and piece-wise constant roughness are used to describe road roughness. Through the numerical analysis and experiments, the effects of surface roughness, sprung mass, and velocity on the dynamic behavior of the bridge are examined.

• Journal of Environmental Impact Assessment
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2009

Corylopsis coreana Uyeki is endemic species in the Korean peninsula and is designated a Category Endangered Plant Species by the Wildlife Protection Act of South Korea. We developed the plan and cooperative model within the local community for the species conservation. In order to carry out this plan we first investigated the ecological characteristics of the species. The species shows patterns of discontinuous distribution and is coupled with the unusual feature of only growing on northern exposed slopes. Although Corylopsis coreana is cut the stem every year, many new sprouts are still grown from the root. Natural germination of the seed occurs only on north-facing slopes, but not on south-facing slopes at spring. That is, the species is highly influenced by soil moisture until the seedling stage has been reached. This factor limits the distribution of the species. When saplings are planted on south-facing slopes, they grow well. The information we gathered greatly helped with efforts to draw up conservation plans. In addition, when the information was shared with the local community, builders and residents showed great interest and displayed a will to help with conservation efforts. Therefore, a cooperative model within the local community was drawn up for the conservation of the species. Accordingly this model could be applied at mitigation measure at environment impact assessment.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.9-27
• /
• 2006

The East Asian (China, Korea and Japan) summer monsoon precipitation and its variability are examined from the outputs of the 22 coupled climate models performing coordinated experiments leading to the Intergovernmental Panel on Climate Change Fourth Assessment Report (IPCC AR4) following the multi-model ensemble (MME) technique. Results are based on averages of all the available models. The shape of the annual cycle with maximum during the summer monsoon period is simulated by the coupled climate models. However, models fail to simulate the minimum peak in July which is associated with northward shifts of the Meiyu-Changma-Baiu precipitation band. The MME precipitation pattern is able to capture the spatial distribution of rainfall associated with the location of the north Pacific subtropical high and the Meiyu-Changma-Baiu frontal zone. However precipitation over the east coast of China, Korea-Japan peninsular and the adjoining oceanic regions is underestimated. Future projections to the radiative forcing of doubled $CO_2$ scenario are examined. The MME reveals an increase in precipitation varying from 5 to 10 %, with an average of 7.8 % over the East Asian region at the time of $CO_2$ doubling. However the increases are statistically significant only over the Korea-Japan peninsula and the adjoining north China region. The increase in precipitation may be attributed to the projected intensification of the subtropical high, and thus the associated influx of moist air from the Pacific to inland. The projected changes in the amount of precipitation are directly proportional to the changes in the strength of the subtropical high. Further a possible increase in the length of the summer monsoon precipitation period from late spring through early autumn is suggested.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.249-256
• /
• 2011

Lagrangian particle transport model coupled with the EFDC have been performed to estimate the residence time and water exchange rate by release time of pollutants over a tidal cycle in Masan Bay. The modelled residence time for the whole bay was about 40 days, ranging from less than 20 days in the southern parts of Budo, to over 100 days in the upper parts of Somodo. The spatial difference of residence time was controlled by tidal residual currents and the distance to the bay channel. The area mean residence time during spring and neap tides was estimated to be about 36 days and 42 days, respectively. The time required for 30% exchange of water was calculated as ranging from 65 to 105 days by release time of pollutants.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.47-52
• /
• 2009

A Lagrangian particle tracking model coupled with the Princeton Ocean Model were used to estimate the average residence time of coastal water in Masan Bay, Korea. Our interest in quantifying the transport time scales in Masan Bay was stimulated by the search for a mechanistic understanding of this spatial variability, which is consistent with the concept of spatially variable transport time scales. Tidal simulation was calibrated through a comparison with the results of semi-diurnal current and water elevation measured at the tidal stations of Masan, Gadeokdo. In the model simulations, particles were released in eight cases, including slack before ebb, peak ebb, slack before flood, and peak flood, during both spring and neap tides. The averaged values obtained from the particle release simulations were used for the average residence times of the coastal water in Masan Bay. The average residence times for the southeastern parts of Somodo and the Samho River, Masan Bay were estimated to be about 20~50days and 70~80days, respectively. The spatial difference for the average residence time was controlled by the tidal currents and distance from the mouth of the bay. Our results might provide useful for understanding the transport and behavior of coastal water in a bay and might be used to estimate the dissimilative capacity for environmental assessment.