• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.1084-1092
• /
• 2005

Various urban transport policies have an effect on urban transit riderships. This study reports variations of metropolitan subway travel patterns affected by an enormous change in bus routes and transfer discount policy between subway and bus mode conducted by Seoul city in July 1st of 2004. In an effort to see the difference between the before and the after policies, two datasets are prepared. Firstly, on a daily bassis, an origin-destination trip table of May of 2004 is used. Secondly, on a daily bassis, an origin-destination trip table of August-September of 2004 is used as a counter measure. Even if seasonal variation was not considered. there were increasing riderships of about 0.25 million on a daily basis. Subway line 2 and 7 have an important role in changes. The effects or system changes, however. largely varied on location and subway line numbers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.25-34
• /
• 1981

Recently there has been a marked increase in concern for security in computerized operations. The purposes of computer security controls are to protect against the unauthorized access to and modification of data processing resources, unauthorised access to and modification of data files and software, and the misuse of authorized activities. The controls relate to the physical security of the data processing department and of the areas within the data processing department : to the security of the data files, programs, and system software : and to the human interaction with the data files, programs, and system software. The controls that will be discussed in this paper include : I. Risk on the computer use. II. Methods of risk counter measure. III. Role of system auditing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2002

In the three-axis control of satellites by using on-board actuators, gyros are usually used to measure the attitude angles and angular rates. The gyros are operated by electronic parts and mechanical actuators. The digital components of the electronic parts consist of largely FPGA (Field Programmable Gate Array) as one of the methods for VLSI(Very Large Scale Integrated) circuit design, while the mechanical parts provide output signal directly by mechanical actuation of a spinning rotor. In this research, a mixed mode of gyro is implemented in FGA. In addition to the hardware implementation, the simulation study was conducted by using the SABER for the mixed mode simulator. Results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are also presented to validate the FPGA implementation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.3-7
• /
• 2000

The authors have realized reconstruction of 3D shape using contacting method with pins and TCP/IP communication. In this paper, the working principal of the mechanism is proposed and tested. A special sensor system is designed as 148 matrix form to measure 3D shape. When contact occurs between pin and the plate of the sensor matrix, the position information of pins is sent to computer and raised height data of the pin is obtained by counter which accumlates encoder signal. So, all datum which contain 3-dimensional coordinate, is transferred using TCP/IP communication. Finally, 3D shape is reconstructured by Web browser of remote computer. The measuring result shows that the proposed mechanism is reliable and promising as a remote measuring device through Internet.

• Korean Journal of Organic Agriculture
• /
• v.17 no.3
• /
• pp.327-345
• /
• 2009

Environment-friendly agricultural products market has been experiencing various change through the quantitative growth in Korea. The food safety is considered seriously and the interest of the consumer is increasing about environment-friendly agricultural products and organic agricultural products. Environment-friendly agricultural products is encouraged in the link of the counter-measure which follows in the market opening. This research aims at making shorter the distance between the productive person and the consumer and to improve the income for organic farm and the price competitiveness for Environment-friendly agricultural products through the present condition analysis for organic produce's production, distribution and consumption market. To solve the problems above, the development of strategies for the establishment of distribution system for the organic produce's stable supply and the improvement of price competitiveness, the establishment of the cooperating system on the produce's demand and supply, the improvement of consumer's reliability by reinforcement with connectivity and transparency of the process, and the vitalization of regional economy and the exchange of rural and city area are needed.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.77-90
• /
• 1996

Recently existing the road traffic low is requlated by hump standard, which is established throuth the actual england TRRL(Transpodt and Road Research Laboratory) experiment. The determined standard has been utilized, however, wihtout the test on of our street and its drivers driving characteristics. Even with the utilization, the appropriate before and after management, is not constituted. In Spite of minimum speed limit, in many case, the utilization itself is questionalble rather than the purpose of restraining speed limit or reducing vehicle confacts. Along with hump consideration, social attention is focused due to series of personal law suit(traffic accident) field against the negligence of local organization management. Therefore counter measure of safe transportation facility is urgently required. With consideration of above background, the purpose of this research is to develop the hump that is appropriate with our transportation environment. This can be achieved thr ugh analysis of hump effectiveness, examination of drivers awamess, facilitation/management problems, and various problems in verticle acceleration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.155-159
• /
• 2007

Noise map presents new alternatives of noise reduction counter measure and becomes important tool for making environmental policy. Many input factors such as road conditions, number of vehicles, speeds of vehicles are used for noise prediction of the noise map. However, results of noise prediction make difference depending on the values of the input factors. In this study, it researched effect of measurement method for vehicle speeds on the prediction results of the noise map.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.297-303
• /
• 2012

In this study, voltammetry system for realizing high sensitivity nano-labeled sensor of detecting heavy metals was designed, and optimal system operating conditions were determined. High precision digital to analog converter (DAC) circuit was designed to control applied unit voltage at working electrode and analog to digital converter (ADC) circuit was designed to measure the current range of $0.1{\sim}1000{\mu}A$ at counter electrode. Main control unit (MCU) circuit for controlling voltammetry system with 150 MHz clock speed, main memory circuit for the mathematical operation processing of the measured current value and independent power circuit for analog/digital circuit parts to reduce various noise were designed. From result of voltammetry system operation, oxidation current peaks which are proportional to the concentrations of Zn, Cd and Pb ions were found at each oxidation potential with high precision.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.55-56
• /
• 1994

KEPCO is now driving forward the raising of transmission-line-voltage from 345kV to 765kV for the stabilization of network and as the counter measure of the rapid-increasing of domestic electric power demands. 800kV GIS is one of the most important apparatuses in the 765kV substation and we are developing the Model $SF_6$ GCB for the GIS now. We'll explain the present condition of development of 800kV $SF_6$ GCB until now.

• Journal of ILASS-Korea
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2002

It is necessary to develope a high frequency diode laser sensor system based on the absorption spectroscopy for the measurement of temperature of the spray flame. DFB diode laser operating near $2.0{\mu}m$ was used to scan over selected $H_2O$ transitions near $1.9{\mu}m\;and\;2.2{\mu}m$, respectively. The measurement sensitivity at wide range of sweep frequency was evaluated using multi-pass cell containing $CO_2$ gas. This diode laser absorption sensor with high temporal resolution up to 10kHz was applied to measure the gas temperature in the spray flame region of liquid-gas 2-phase counter flow flame. The successful demonstration of time series temperature measurement in the spray flame gives us motivation of trying to establish non-intrusive temperature measurement method in the practical spray flame.