• 정보처리학회논문지D
• /
• 제15D권3호
• /
• pp.375-386
• /
• 2008

최근 정보시스템 개발 패러다임이 객체지향 및 컴포넌트 기반으로 변해가고 있으며 이러한 방법론이 소프트웨어 산업계를 주도하고 있다. 소프트웨어 비용측정 분야도 이러한 변화에 적응하기 위해서 OO 환경에 적합한 비용 측정 모델로의 전환이 요구되고 있으며 실제 UCP 기법 등 객체지향 개념의 기능점수 연구가 진행되고 있다. 특히 객체지향 기능점수 측정 기법은 사용사례 중심으로 개발 프로젝트 초기에 적용 가능하고, 개발 진행 단계별 소프트웨어 산출물에 따라 생명주기 전체에 걸쳐서 적용 가능하고, UML 표기법에 의한 사용자와 의사소통으로 이해가 항상 가능하기 때문에 LOC 및 기존 기능점수 측정 기법의 한계를 극복하는 장점이 있다. 따라서 본 논문은 최근 객체지향 정보시스템 개발 환경에서 널리 사용되고 있는 UML 표기법 및 국방 CBD 방법론 절차에 의한 정보시스템 개발 프로젝트 진행에 따라 초기단계 시점(ROFP)과 분석단계 시점(AOFP)에서 기능점수를 측정하며, 전통적인 FPA 모델과 객체지향 FPA 모델을 통해 UML 모델링과 산출물을 기반으로 한 유스케이스와 클래스의 상관도 분석에서 서비스 기능과 객체/클래스 기능을 식별하고 기능점수를 구하는 측정기법을 제안한다. 무엇보다 전통적인 기능점수 측정 기법인 IFPUG-CPM 및 소프트웨어 대가기준의 기능점수 측정기법을 개선하여 객체지향 정보시스템 개발에 적합한 기능점수 측정 프로세스를 제시하고 사례연구를 통한 적합성 평가 결과를 제시한다.

• 대한공간정보학회지
• /
• 제7권2호
• /
• pp.143-153
• /
• 1999

지형공간정보체계는 사용이 용이하여 널리 대중화되어가고 있다. 최근 수치사진측량은 GIS데이터베이스를 구축하거나 갱신하기 위한 경제적인 방법으로 인정받아 가고 있다. 지형공간정보의 획득을 위한 근거리사진측량은 좌표해석을 위해 이용되고 있는 번들조정이 요구된다 번들조정은 외부표정요소를 결정하기 위해서 초기 근사 값과 기준점들을 필요로 한다. 본 연구에서는 번들조정을 수행하기 전에 초기근사값을 추정하기 위한 종래의 방법들을 비교분석하고, 이들 외부표정요소의 결정을 위한 새로운 알고리즘을 개발하여 비용을 절감할 수 있는 방안을 제시하고자 하였다. 우선 효과적이고 경제적이며 보다 정확한 사진측량 관측값처리 기법을 제공하고자, 기존의 DLT 알고리즘에 관측값에서의 모든 종류의 과대오차들을 자동적으로 검출하고 제거하기 위한 robust 방법과 해를 위해 필요한 기준점의 수를 줄이기 위해 GPS를 도입하였다. 또한 본 논문에서는 단사진으로 처리하는 새로운 후방교회법(space resection)유도하였다. 제안한 방법의 주된 장점은 외부표정요소의 초기근사값을 요구하지 않고 계산과정에서 반복계산을 요구하지 않는다는 점이다.

• 한국수자원학회논문집
• /
• 제53권2호
• /
• pp.89-96
• /
• 2020

환경부 산하 물관리 기관들은 주요 하천을 대상으로 양질의 기초 자료를 생산 및 축적하고 있다. 하지만 농경지를 많이 포함한 유역에서는 농업용수의 취수와 배수 등 인공적인 물의 순환 과정이 정량적으로 조사되지 못하고 있어 하천 수량의 통합적인 관리가 부진한 실정이다. 본 연구에서는 농업용수를 목적으로 하천변에서 취수되는 유량의 조사를 위해 사용되는 간접 유량 계측방법 중 가동시간에 따른 전력량법(가동시간법)을 적용 및 개선하여 저비용으로 높은 신뢰도의 결과자료를 얻을 수 있는 방법에 대한 연구를 수행하였다. 가동시간법은 실시간 전력량 자료의 확보가 어려운 소규모 양수장에 적용하기 적합하다. 실측 유량과의 상관성 분석을 통해 자료의 신뢰성을 검증한 결과, 양수장의 흡입구가 연결된 하천의 수위를 반영하여 가동시간법으로 산정한 유량은 실측 유량과 상당히 일치하는 결과를 얻을 수 있는 것으로 확인되었다. 또한 본 연구에서는 최초 설비 설치시에 대한 투자 비용을 직접 유량 계측방법들과의 비교를 통해 저비용으로 양질의 유량자료를 생성하여 높은 효율성을 가지는 것으로 확인하였다. 가동시간법을 하천변에 위치한 크고 작은 양수장에 적용하여 유량 자료를 확보한다면, 보다 정량적이고 통합적인 하천수 관리의 시행에 있어 많은 영향을 미칠 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1234-1242
• /
• 2003

In this paper we present a simple and efficient robust optimal design formulation for MEMS structures and its application to a resonant-type micro probe. The basic idea is to use the gradient index (GI) to improve robustness of the objective and constraint functions. In the robust optimal design procedure, a deterministic optimization for performance of MEMS structures is followed by design sensitivity analysis with respect to uncertainties such as fabrication errors and change of operating conditions. During the process of deterministic optimization and sensitivity analysis, dominant performance and uncertain variables are identified to define GI. The GI is incorporated as a term of objective and constraint functions in the robust optimal design formulation to make both performance and robustness improved. While most previous approaches for robust optimal design require statistical information on design variations, the proposed GI based method needs no such information and therefore is cost-effective and easily applicable to early design stages. For the micro probe example, robust optimums are obtained to satisfy the targets for the measurement sensitivity and they are compared in terms of robustness and production yield with the deterministic optimums through the Monte Carlo simulation. This method, although shown for MEMS structures, may as well be easily applied to conventional mechanical structures where information on uncertainties is lacking but robustness is highly important.

• 대한영양사협회학술지
• /
• 제2권2호
• /
• pp.158-167
• /
• 1996

Food waste left by patients in hospitals is an important indicator of the nutritional adequacy of the patients' diet and of their satisfaction with food. Food wasted by patients or staff in hospitals is one of the most serious problem in hospital foodservice systems. The purpose of this study was to evaluate the disposal practices of food waste in hospital foodservices for providing basic information for an efficient solid waste management. This approach was achieved using a variety of qualitative and quantitative information including general food waste practices and measurement of food waste left by patients and staff in 20 hospital foodservices. The average food wasted by patients and staff per day was 402.20kg and 206.98kg respectively, being total food waste of 578.08kg per day. The mean plate waste of a staff was 115.95g, which was much lower than that of a patient (221.03g). As means of food waste treatment, most hospitals(60%) are using animal feed, followed by means of collection by contracters(15%) and disposal of waste collection after condensing. An average monthly cost for disposing food waste was 915,000 won and average 138.58 minutes were spent to dispose food waste in hospital foodservices.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.815-821
• /
• 2015

Maritime safety has been more critical recently due to the occurrence of shipboard accidents involving prime movers. As such, the propulsion shafting design and construction plays a vital role in the safe operation of the vessel other than focusing on being cost-efficient. Smaller vessels propulsion shafting system normally install high speed four-stroke diesel engine with reduction gear for propulsion efficiency. Due to higher cylinder combustion pressures, flexible couplings are employed to reduce the increased vibratory torque. In this paper, an actual vibration measurement and theoretical analysis was carried out on a propulsion shafting with V18.3L engine installed on small car-ferry and revealed higher torsional vibration. Hence, a rubber-block type flexible coupling was installed to attenuate the transmitted vibratory torque. Considering the flexible coupling application factor, reduction gear stability due to torque variation was analyzed in accordance with IACS(International Association of Classification Societies) M56 and the results are presented herein.

• 대기
• /
• 제20권4호
• /
• pp.519-530
• /
• 2010

In this paper we review current research on Atmospheric Brown Clouds (ABCs) with lightweight Unmanned Aerial Vehicles (UAVs) and miniaturized instruments. The UAV technology for in-situ measurements, including aerosol concentration, aerosol size distribution, aerosol absorption, cloud drop size distribution, solar radiation fluxes (visible and broadband), and spectral radiative fluxes, is a leading-edge technology for cost-effective atmospheric sounding, which can fill the gap between the ground measurement and satellite observation. The first experimental observation with UAVs in Korea, Cheju ABC Plume Monsoon Experiment (CAPMEX), conducted during summer 2008 revealed that the Beijing plumes exerted a strong positive influence on the net warming and fossil-fuel-dominated black-carbon plumes were approximately 100% more efficient warming agents than biomass-burning-dominated plumes. Long-term sustainable routine UAV measurements will eventually provide truly three-dimensional data of ABCs, which is necessary for the better understanding of their climate impacts and for the improvement of numerical models for air pollution, weather forecast and climate change.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.9-15
• /
• 2006

To develop an efficient and cost effective on-line method to determine the stock consistency a study on the relationship between the turbidity and transmittance of stocks and their consistency was carried out using a system consisted of a dynamic drainage jar, pump and turbidometer. Results shooed that the wavelength of 525 nm was most effective for measuring turbidity. As the consistency increases the turbidity increases, and their relationship can be depicted in the second order equations. On the other hand the relationship between consistency and transmittance can be described in exponential equations. From these equations the consistencies of stock samples can be determined using the measured values of turbidity or transmittance.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.196-201
• /
• 2006

A electrical fault that may generate an electrical disaster is defined as any abnormal condition caused by reduction in the insulation strength. To find out the abnormal condition, periodical inspections have being performed every 3 years. Recently, the number of empty houses during normal working hours is rising by dramatic increase in the number of nuclear families and double income families. To define the potential risk of the electric installation, measurement of zero phase current has been being considered. But the measured value could not be adapted to an absolute reference to the installation because the measured zero phase current value also contained capacitive leakage current. Therefore, in this paper, the correlation between the condition of the electrical installation and the zero phase current was analyzed. The result focuses on to detect them in a cost efficient way.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.311-315
• /
• 1987

In this paper an efficient algorithm to estimate the volume and surface area and the reconstruction algorithm for 3-dimensional graphics are presented. The graph theory is used to estimate the optimal quantitative factors. To improve the computing efficiency, the algorithm to get proper contour points is performed by applying several tolerances. The search and the given arc cost is limited according to the change of curvature of the cross-sectional contour. For mathematical model, these algorithms for volume estimation based on polyhedral approximation are applied to the selected optimal surface. The results show that the values of the volume and surface area for tolerances 1.0005, 1.001 and 1.002 approximate to values for tolerances 1.000 resulting in small errors. The reconstructed three-dimensional images are sparse and consist of larger triangular tiles between two cross sections as tolerance is increasing.