• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.621-631
• /
• 2011

In space qualified DC-DC converters, optimization of the following electrical characteristics is of greater interest in comparison with other specifications; power loss/efficiency, output voltage ripple and volume/weight. The main goal of this paper is to present an appropriate solution for optimizing the above mentioned characteristics. For this purpose, a comprehensive power loss model of a DC-DC converter is fully developed. Proper models are also demonstrated for assessment of the output voltage ripple and the utilized transformer volume as the bulkiest component in a DC-DC converter. In order to provide a test bed for evaluation of the proposed models, a 50W push-pull DC-DC converter is designed and implemented. Finally, a novel cost function with three assigned weight functions is proposed in order to have a trade-off among the power loss, the output voltage ripple and the utilized transformer volume of the converter. The cost function is optimized for applications in which volume has the highest priority in comparison with power loss and ripple. The optimization results show that the transformer volume can be decreased by up to 51% and this result is verified by experimental results. The developed models and algorithms in this paper can be used for other DC-DC converter topologies with some minor modifications.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.271-272
• /
• 2021

The maintenance and repair work of sidewalk block pavement is a construction that requires a large amount of budget to be invested every year. It is important to establish an appropriate standards for estimating construction cost to ensure proper budgeting and quality. In this study, the standards for estimating the cost of maintenance and construction work for sidewalk blocks that can be applied to the construction volume classified according to the site conditions, construction type, and equipment use differentiated from new construction was established. As a result, the daily construction volume was presented by reflecting excavator and truck as equipment in the combination of paver and common worker. The re-installation was applied by separating the construction volume of sections with general blocks and induction/raised blocks based on the installation of sidewalk blocks after demolition. Generally if block cutting is necessary, the precision construction conditions using a cutting machine were taken into consideration to secure the construction quality. In addition, it has been revised to apply classified construction volume into A and B-Type depending on the park and site conditions.

• Current Research on Agriculture and Life Sciences
• /
• v.18
• /
• pp.33-42
• /
• 2000

A field case study was performed to investigate the effect of shallow ponding in paddy field on irrigation water requirement of direct seeded rice. In addition, an economic analysis was made to see the effect of no-till direct seeded rice on cost reduction. A field study was performed at a 2.1ha paddy field in Kimjae city, Chonbuk province from 1991 to 1999. Various direct seeding methods such as dryland seeding, wetland seeding, and no-till wetland seeding were introduced. Then, cost reductions due to the direct seeding and no-till were calculated. In addition, to investigate the effect of shallow ponding on irrigation water requirement, field measurements such as irrigation water volume, drainage water volume, rainfall depth, and ponding depth, were made at a 40a plot within the same area in 1988 and 1990. The results of the shallow ponding study showed that the irrigation water depth, rainfall, and the drainage depth were 379mm, 458mm, and 448mm in 1988 growing season, and 274mm, 819mm, and 736mm in 1990, respectively. The shallow ponding irrigation method saved irrigation water by about 20% with higher yield compared with the traditional method. The economic analysis showed that won \640,000 per ha can be saved by direct seeding due to no nursery cost, and \1,220,000 per ha due to no-till and no nursery cost. The yields ranged 540 to 640 kg per 10a during the study period with an average of 590kg per 10a. If these cropping techniques with no-till direct seeding and shallow ponding depth for rice cropping prove to be advantageous with further study, they can be adopted for the most of the paddy fields in Korea.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.262-272
• /
• 2015

The aim of this study is to analysis factors that determine the competitiveness of container ports using the KJ and AHP methods. For this, 54 detailed attributing factors were identified both by previous studies and port users. 24 attributing factors were identified by a group of port experts. also, These were grouped 18 detailed attributing factors into 6 attributing factors by a group of port experts using the KJ method. These were made into a model of hierarchical structure with 3 levels, taking 1 goal factor, 6 evaluation factors and 18 detailed evaluation factors. The collected date of questionnaires were analyzed by a group of port experts using the AHP method. The analysis result of the evaluation factors in container port shows that port cargo volume is the most important factor, followed by port location, port cost, port service, port facility and port management. The analysis results of detailed evaluation factors in container port shows that import and export cargo volume is the most important factor, followed by transshipment cargo volume, distance from main trunk, cargo handling cost, distance from the point of importing and exporting, speediness of cargo handling, stability of cargo handling, vessel/cargo cost in port entry and leaving, punctuality in port entry and leaving, number and length of berth, collateral service cost, terminal area, hinterland accessibility, ability of terminal operation company, front depth of berth, etc.

• Biomedical Science Letters
• /
• v.26 no.4
• /
• pp.275-287
• /
• 2020

Since its introduction in the forensic field, quantitative PCR (qPCR) has played an essential role in DNA analysis. Quality of DNA should be evaluated before short tandem repeat (STR) profiling to obtain reliable results and reduce unnecessary costs. To this end, various human DNA quantification kits have been developed. Among these kits, the PowerQunat® System was designed not only to determine the total amount of human DNA and human male DNA from a forensic evidence item, but also to offer data about degradation of DNA samples. However, a crucial limitation of the PowerQunat® System is its high cost. Therefore, to minimize the cost of DNA quantification, we evaluated kit performance using a reduced volume of reagents (1/2-volume) using DNA samples of varying types and concentrations. Our results demonstrated that the low-volume method has almost comparable performance to the manufacturer's method for human DNA quantification, human male DNA quantification, and DNA degradation index. Furthermore, using a reduced volume of regents, it is possible to run 2 times more reactions per kit. We expect the proposed low-volume method to cut costs in half for laboratories dealing with large numbers of DNA samples.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.299-311
• /
• 1995

Conventional discounted cash flow techniques fail to capture the risk associated with investments. This paper proposes an annual cash flow model that considers risk, cost structure and inventory liquidation in the evaluation of investment alternatives. The risk differential of investments is included using the capital asset pricing model while the stochastic version of the cost-volume-profit approach is used to consider inventory liquidation and cost structure. Tradeoffs between fixed and variable costs have been investigated, and portrayed using iso-cash flow curves. The proposed cash flow model has been developed, in particular, to enable an accurate evaluation of advanced manufacturing systems.

• Culinary science and hospitality research
• /
• v.10 no.2
• /
• pp.121-134
• /
• 2004

The research on set menus served at Japanese restaurants at special-rate hotels around Gwangju and Jeonla Province suggests problems and rooms for improvement through examination of the current status of set menus at Japanese Restaurant in hotels of Gwangju and southern Jeonla province, prime cost, and sales volume. Advantageous points of course menus served at Japanese restaurants at hotels are as followings: a variety of courses are available; ingredients can reflect seasonal change; clients are satisfied with food at reasonable cost; and it results in sales increase. Based on such measures, more efforts should be made in order to advance preference and satisfaction with menus, cut back on prime cost, and maximize sales volume.

• Journal of Korea Port Economic Association
• /
• v.22 no.2
• /
• pp.61-82
• /
• 2006

In order to cope with improvement of labor cost and cargo volume, Korean ports, especially Busan port, are in need of many new facilities. Of course, current facilities should be fully used, and at the same time it needs to make every effort to maximize its productivity as well as cost saving. To this end, this study has decided to focus on automatic yard operation suitable to the domestic container terminal environments, making a survey of many advanced container terminals, trying to find out their common factors, and finally suggesting several alternatives based on the combination of these factors. Also, this study has suggested the present value of initial investment and operating cost by alternative, and at the same time presented the relationship between cargo handling volume and cost/revenue of the optimal alternative, so that it may be of help in decision making.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.6
• /
• pp.69-78
• /
• 1982

Traditional CVP (Cost-Volume-Profit) analysis employs linear cost and revenue functions within some specified time period and range of operations. Therefore CVP analysis is assumption of constant labor productivity. The use of linear cost functions implicity assumes, among other things, that firm's labor force is either a homogenous group or a collection homogenous subgroups in a constant mix, and that total production changes in a linear fashion through appropriate increase or decrease of seemingly interchangeable labor unit. But productivity rates in many firms are known to change with additional manufacturing experience in employee skill. Learning curve is intended to subsume the effects of all these resources of productivity. This learning phenomenon is quantifiable in the form of a learning curve, or manufacturing progress function. The purpose d this study is to show how alternative assumptions regarding a firm's labor force may be utilize by integrating conventional CVP analysis with learning curve theory, Explicit consideration of the effect of learning should substantially enrich CVP analysis and improve its use as a tool for planning and control of industry.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.1
• /
• pp.66-72
• /
• 2000

Inventory management of a product not to be produced any more has a great impact on the financial status of a company. Clearance pricing can make bigger sales volume together with great savings of inventory holding cost specially for a durable goods with relatively large inventory carrying cost and accordingly cash inflow can be improved. This paper deals with the inventory management by non-linear clearance pricing with the sales rate which depends on the accumulated sales volume and selling price.