• 한국임산에너지학회:학술대회논문집
• /
• 한국산림바이오에너지학회 2011년도 정기총회 및 학술연구발표회
• /
• pp.37-40
• /
• 2011

• 상하수도학회지
• /
• 제22권5호
• /
• pp.511-516
• /
• 2008

Since 1989, Advanced drinking water treatment processes began to build in Korea, especially the water treatment plants around the Nak-dong river stream due to sequential pollutant accidents. Moreover, Advanced drinking water treatment processes, ozone and GAC, are again to be built in water treatment plants around Han-river stream to control taste and odor, micro pollutants. However, there are still a lot of discussion to decide the processes to apply for advanced treatment. Thus there are still need to understand clearly on the cost evaluation of each advanced treatment processes. The cost evaluation was accomplished based on the data of six water treatment plants which are currently being either operating or constructing. Exceptionally, PAC(Powdered Activated Carbon) process was evaluated with cost estimation from construction company. The capital cost per unit volume of ozone process was significantly decreased as the treatment capacity increased. The capital cost was in the order of GAC, ozone and GAC. The operation cost decreased in the order of PAC, GAC and ozone. The total cost considering present value shows that ozone process covers 84% of ozone and GAC process for $30,000m^3/d$ capacity while it covers less than 35% for over 140 thousands $m^3/d$ capacity. Comparing GAC only, and ozone/GAC process, ozone/GAC process is more cost effective for high capacity water treatment plant.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.75-82
• /
• 2012

Elimination of rotor position sensors mechanically coupled with the rotor shaft is attractive to variable speed drives primarily due to increased system reliability and cost reduction. In this regard, search for a simple and robust position sensorless control has been intensified in past few years specifically for low-cost, high-volume applications such as home appliances. This paper describes a new parameter insensitive position sensorless control for switched reluctance motor (SRM) drives satisfying such a need in this market segment. Two consecutive switch-on times of the controllable switch in hysteresis current control are compared to estimate the rotor position and speed. The proposed sensorless control algorithm is very simple to implement since it does not depend on extensive computation or any additional hardware. In addition, the proposed method is robust in that its dynamic performance is least affected by system parameter variations. The proposed approach is demonstrated on a single-controllable-switch-converter-driven SRM with two-phases that lends itself to a system with low cost and compact packaging which comes close to the intended applications. Analysis and simulation results followed by experimental verification are presented to demonstrate the feasibility of the proposed sensorless control method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.105-108
• /
• 2006

The fuel cell is one of the promising environment-friendly energy sources for the next generation. The fuel cell provides good energy efficiency above 40% without pollution or noise. Different fuel cell types are usually distinguished by the kind of electrolyte. Among these, the proton exchange membrane fuel cell (PEMFC) has advantages of high power density. low operating temperature, relatively quick start-up, and rapid response to varying loads. The bipolar plate is a major component of the PEM fuel cell stack, and it takes a large portion of stack volume, weight and cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding and by machining. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. Flow channels were fabricated by compression molding with design of experiments (DOE) to evaluate moldability. The cost for compression molding of graphite-composite bipolar plate was compared with machining cost to make the same bipolar plate.

• Journal of Forest and Environmental Science
• /
• 제33권2호
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.247-250
• /
• 2009

This study considers the feasibility of using the low cost assembled separator. The graphite plate has been widely used as the separator in the field of PEMFCs(Polymer electrolyte membrane fuel cell) industry because of its excellent material properties such as good corrosion resistance, good electrical conductance and so on. However, there are some problems for the commercialization due to its poor cost effectiveness for the large volume manufacturing and lack of mechanical strength. From this respect, this study has focused on the manufacturing technology in order to reduce the price for the commercialization of separator. This study also shows that the assembled separator of the suggested structure, which is composed of grafoil and PC(PolyCarbonate) materials, could be manufactured at low cost enough for the mass production. The flow fields produced by cutting foils and the base plates of the separators were simply made by mechanical work.

• 수산경영론집
• /
• 제40권1호
• /
• pp.153-172
• /
• 2009

Developing foreign fishing ground executed in various uncertainty such as fishing price, oil price, exchange rate. But traditional economic evaluation method, CVP(Cost-Volume-Profit) analysis doesn't consider uncertainty of foreign fishing ground. So we need new approach about economic evaluation that can take into account uncertainty. This study focus on the economic evaluation about experimental survey of tuna fishing grounds in the north pacific ocean by sensitive analysis and simulation. The results of the economic evaluation can be summarized as follows. First, when we take it for granted that the other uncertainty factors except for each fishing price, oil price, and exchange rate are constant. CVP gross sales has positive relation to the increasing rate of oil price, exchange rate(W/$) and negative relation to the increasing rate of fishing price and exchange rate(W/${\yen}$). Second, when we are supposing that fishing price, oil price, and exchange rate are followed. the probability of less than CVP gross sales is A ship(48.87%), B ship(49.64%), C ship(50.55%). Consequently, the economic evaluation by sensitive analysis and simulation is more useful tool than CVP(Cost-Volume-Profit) analysis under uncertainty.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1940-1949
• /
• 2015

This paper presents an Enhanced Particle Swarm Optimization (EPSO) to solve short-term hydrothermal scheduling (STHS) problem with non-convex fuel cost function and a variety of operational constraints related to hydro and thermal units. The operators of the conventional PSO are dynamically controlled using exponential functions for better exploration and exploitation of the search space. The overall methodology efficiently regulates the velocity of particles during their flight and results in substantial improvement in the conventional PSO. The effectiveness of the proposed method has been tested for STHS of two standard test generating systems while considering several operational constraints like system power balance constraints, power generation limit constraints, reservoir storage volume limit constraints, water discharge rate limit constraints, water dynamic balance constraints, initial and end reservoir storage volume limit constraints, valve-point loading effect, etc. The application results show that the proposed EPSO method is capable to solve the hard combinatorial constraint optimization problems very efficiently.

• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.21-31
• /
• 2015

The world air transport industry has grown steadily with quantitative expansion. The volume of air transport in the world is skyrocketing with the open-sky trend. Air passengers from or to South Korea has shown 5% of annual growth for the last couple of decades which caused South Korea now ranking in 18th in the World for air transport market size. Quantitative expansion of Air transport affects in policy making of air transport operators, such as airports, airlines or authorities, directly and indirectly. Especially, Aviation Safety field should be supported by policy regime with the growth of air transport volume, assured resources for continuous monitoring is standing out as a vital factor. This study is to estimate social costs caused by aviation accidents and investment costs for aviation safety by airports, airlines and authorities as operators. Estimated investment costs for aviation safety verified by comparing and analysing them. Precedent studies were reviewed to refer research methodology to calculate aviation accident costs and safety costs of operators. Safety costs of operators was calculated with literature researches and interview surveys among professionals of each operators in rational range.

• Journal of Nutrition and Health
• /
• 제36권3호
• /
• pp.319-326
• /
• 2003

The purposes of this study were to : (a) analyze the menus of food service operations using the menu analysis techniques of Kasavana & Smith, Miller, Merricks & Jones, Pavesic and Uman, (b) closely examine the characteristics of the five analysis techniques. Calculations for the menu analysis were done by computer using the MS 2000 Excel spreadsheet program. Menu mix% and unit contribution margin were used as variables by Kasavana & Smith, sales volume and food cost% by Miller, sales volume and cash contribution by Merrick & Jones, weighted contribution margin and food cost% by Pavesic, and total cash contribution and unit contribution margin by Uman. In each case, a four-cell matrix was created, and menu items were located in each according they achieved high or low scores with respect to two variables. Items that scored favorably on both variables were rated in the top category (e.g., star, prime, signature, group A, winner) and those that scored below average on both were rated in the lowest category (e.g., dog, problem, loser, group D, loser). While the 3 methods of Kasavana & Smith, Miller, Merrick & Jones focus on customers' viewpoints, the others consider the managers' viewpoints. Therefore, it is more likely to be desirable for decision-making on menus if the menu analysis technique chosen is suited to its purpose.