• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

In order to acquire an image in a positron emission tomography, it is necessary to draw the position coordinates of the scintillation pixels of the detector module measured at the same time. To this end, in a detector module using a plurality of scintillation pixels and a small number of photosensors, it is necessary to obtain a flood image and divide a region of each scintillation pixel to obtain a position of a scintillation pixel interacting with a gamma ray. Alternatively, when the number of scintillation pixels and the number of photosensors to be used are the same, the position coordinates for the position of the scintillation pixels can be directly acquired as digital signal coordinates. A method of using a plurality of scintillation pixels and a small number of photosensors requires a process of obtaining digital signal coordinates requires a plurality of photosensors and a signal processing system. This complicates the signal processing process and raises the cost. To solve this problem, in this study, we developed a method of obtaining digital signal coordinates without performing the process of separating the planar image and region using a plurality of flash pixels and a small number of optical sensors. This is a method of obtaining the position coordinate values of the flash pixels interacting with the gamma ray as a digital signal through a look-up table created through the signals acquired from each flash pixel using the maximum likelihood function. Simulation was performed using DETECT2000, and verification was performed on the proposed method. As a result, accurate digital signal coordinates could be obtained from all the flash pixels, and if this is applied to the existing system, it is considered that faster image acquisition is possible by simplifying the signal processing process.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.505-512
• /
• 2021

This study is to strengthen the competitiveness of 5-star hotel restaurants in Seoul, and the paired sample t-test was used. As a result of the study, first, the importance variables of hotel restaurants were measured as high variables such as'taste and quality of food(4.30)' and'diversity of menus(4.17)'. Second, the variables satisfied by customers visiting hotel restaurants were 'quantity of food(3.86)', 'taste and quality of food(3.78)', and 'diversity of menus(3.75)', etc. were surveyed. Third, as a result of IPA analysis, the variables in the first quadrant were the restaurant staff's expertise, cleanliness of the restaurant, the taste and quality of the food, the variety of menus, rapid service, food plating, the amount of food served, and the atmosphere of the restaurant. External environment, etc. were derived. In the second quadrant, cleanliness of restaurant tableware, freshness of food, and restaurant view were investigated. In the third quadrant, the reputation, restaurant toilet cleanliness, table cleanliness, parking facilities, transportation and convenience, etc. belong to this. Finally, variables belonging to the fourth quadrant were investigated such as reasonable price, cost-effectiveness and affordability, friendliness of restaurant staff, clothing and appearance of restaurant staff, and restaurant interior.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.34-46
• /
• 2021

In the domestic data exchanging market, unreasonable pricing of purchase data is consistently mentioned as a major obstacle in data trading. This is a problem caused by the inability to properly evaluate the value of data products due to lack of product information and experience in using them. In order to activate trading, the data exchanges need to provide information that allows consumers to comprehensively judge the value of data products in addition to prices. The cost-based, income-based, and market-based methods, which are mainly applied to data valuation, are insufficient as data valuation methods to stimulate trading and distribution because only price information, a result of valuation from a supplier's point of view, can be shared with consumers. This study aims to develop a measurable valuation method that allows data trading stakeholders (exchanges, suppliers, and consumers) to judge and share the value of data products from a common perspective. To this end, we identified the value drivers of data products, which are considered important in overseas data exchanges and related research, and derived an evaluation method that can quantitatively measure each value driver. In addition, evaluation criteria in the form of a rating table were developed using data products for transactions, and a value evaluation index was developed through stratification analysis (AHP) to enable relative value comparison. As a result of applying the evaluation criteria to actual data products, it was found that the evaluation values were differentiated according to the characteristics of individual data products, so it could be used as a relative value comparison tool.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.13-25
• /
• 2019

This study conducted individual in-depth interviews of tourists from Taiwan, Hong Kong and Thailand who visited Daegu. According to the analysis, Taiwan's target audience conducted an interview at the Chimac Festival in July 2018 at Duryu Park and was a university student as an individual female tourist. She got the information through SNS. The accommodation was guest house and medium and low cost hotel. The main tourist attractions included Seomun Market Night Market, Eworld and Dongseongno. The meals were Anjirang Gopchang and Galbijim in Dongin-dong. Next, the Hong Kong tourist interview was held in May 2018 at the Kwandeung Festival in Duryu Park, and was an individual tourist as a man. Lastly, an interview with a Thai tourist was held in April 2018 at the Donghwa Temple Cherry Blossom Festival in Palgongsan Mountain, and he purchased a travel agent product as a man. Participants of the tour in Daegu were interested in unusual experiences such as beauty, wedding, theme parks, and restaurants that are unique to Korea. What was disappointing was that there were not enough shopping facilities, such as duty free shops, and that the table in the restaurant was inconvenient, and that there were not enough signboards by language for foreigners.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.122-124
• /
• 2022

Handling Passenger Traffic is the main challenge for designing an elevator group-control algorithm. Advanced control systems such as Hyundai's Destination Selection System(DSS) lets passengers select the destination by pressing on a selecting screen, and the systems have shown great efficiency. However, the algorithm cannot be applied to the general elevator control system due to the expensive cost of the technology. Often many elevator systems use Nearest Car(NC) algorithms based on the SCAN algorithm, which results in time efficiency problems. In this paper, we designed an elevator group-control algorithm for specific buildings that have approximate timetable data for most of the passengers in the building. In that way, it is possible to predict the destination and the location of passenger calls. The algorithm consists of two parts; the waiting function and the assignment function. They evaluate elevators' actions with respect to the calls and the overall situation. 10 different timetables are created in reference to a real timetable following midday traffic and interfloor traffic. The specific coefficients in the function are set by going through the genetic algorithm process that represents the best algorithm. As result, the average waiting time has shortened by a noticeable amount and the efficiency was close to the known DSS result. Finally, we analyzed the algorithm by evaluating the meaning of each coefficient result from the genetic algorithm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3943-3955
• /
• 1975

The purposes of this study are to evaluate the utilization characteristics of electrical power consumption, to grasp the present trends in the use of electrical equipments, to estimate the demand factor and load factor being held, and to evaluate the efficiency of electical uses for the recently electrified farms cultivating paddy rice. For the purposes, 109 sample farms located in eleven villiages electrified in six different years from 1968 to 1973, were chosen at random and investigated on 35 items concerning to electrical uses and wiring systems. The survey was carried out in 1975, in the vinicity of Suweon city. The results are summarized as follows: i) The average annual power consumption on sample farms is considered to be low, being 242.9 Kwh. in 1974, and varied according to the different electrified year and size of cultivated land, respectively. It has significant positive correlation to the area of farm, too. ii) Between the number of year of electrical uses and the power consumption, there is very significant positive correlation, which could be expressed as Y=43.041+16.108 X, where X represents the number of years of electrical uses. The annual increment of power consumption is much greater at the beginning of the electrification than that at the later years, its average being approximately 20 percent. However, it is recommended that any estimation of long-term increments should be carefully investigated. iii) The monthly power consumption varies considerably throughout a year, in which the heaviest farm load occurs in November. Observing the seasonal variation of consumption, the winter-time is the heaviest season while the summer is the lowest. The result implies house lighting is chief contribution to the present electrical consumption on the farms. Comparing the variation of monthly consumption ratios between the sample farms and industries, the electrical uses on the farms are independant of the industrial uses, and further, the agricultural uses are of inverse pattern to the farms from the results that there is negative correlationship between them, iv) The number of electrical equipments used on the farms are occupied chiefly by lighting sources. Next to the lighting sources, household appliances of small quantity and some motors are used. The mean electrical quantity is about 1, 127.4 watt, which corresponds to about 37.6 per cent to the contracted quantity. The composition of quantity is chiefly occupied by the electrical motor of about 1.5 hp., single-phased. The number of the annual utilization hours of each equipment is tabulated in Table IV-5. In contradiction to the high utilization of lighting sources and small household appliances, the motor is poorly used for approximately 22 hours in a year. v) More than 55 per cent of farms want to purchase new electrical equipments such as small household appliances and electrical motors in their number. The impulse of purchasing such items is stimulated by the contacts to the mass media and their knowledge on such equipments. Consequently, the increase of electrical uses could be prompted by such trials as education and demonstration. vi) The demand and load factors on the farms vary considerably according to the greater variation of the power consumption, daily or monthly. The daily demand factor is 22.4 per cent and load factor 18.6 per cent, while the annual demand factor is 1.3 per cent and load factor 70 per cent approximately. Therefore, the low efficiency of construction cost requires re-evaluation of the present contracted quantity of 3 Kw. or increase of electrical uses. vii) The electrical energy on the farms devoted chiefly to lighten the farm residences does not contribute to the farm incomes. Consequently, the cost of electrical consumption presses considerably upon the farm economy. Therefore, there is great need to build up the electrical uses on the farms through the development of new works and techinques to utilize any electrical equipments on the production of farm products. Further more, such the development should be related to increase the actual income of the farm consumers.

• Journal of Distribution Research
• /
• v.16 no.1
• /
• pp.117-140
• /
• 2011

The sales promotion strategy can be classified into two categories: cost-down and value-added promotions. Although many studies have been performed on sales promotion in the past, little attention has been given on cost-down promotion, and in particular on its strategy. Also there has been a renewed interest on value-added promotion strategy as means of attracting more customers and delivering value by providing a greater benefit. This study examines the effect of value-added promotion on the evaluation of promotional products. The topic is important because the value-added promotions are not always perceived as a benefit by consumers and they depend on the situational factors. We postulate three hypotheses on the basis of related literature. We conduct two studies: one employing experiment (study 1) and the other, quasi-experiment (study 2) to investigate the effect of two situational factors, namely the promotional package type and retailer uncertainty on the valuation of promotional products. Study 1 employs 2 promotional package types (bundled with freebie type vs. one-plus-one type) by 3 evaluation targets (overall package, a focal product and freebie) in experimental design. Also it is found that consumers devaluate the promotional product when the level of retailer uncertainty is high (t=-4.70, p=.000) as shown in Table 2. As depicted in Figure 2, the interaction effect of retailer uncertainty and package types on the evaluation of promotional product as a whole does not appear to be significant. However, when the level of retailer uncertainty is high, the focal product suffers from lower valuation if it is included in a bundle with freebie type package. The purpose of Study 2 is to cross-check the results of Study 1. The results of Study 2 also show that the consumers devaluate the promotional products as a whole when the level of retailer uncertainty is high. Furthermore, Study2 examines the consumers' willingness to purchase. The willingness to purchase of 2 different consumer groups divided by their reservation prices before and after exposure to a promotional stimuli shows no significant differences(t=1.911, p=.057). The results suggest that the consumers' reservation prices before the exposure to the promotion can be a reference prices of their's. But after the promotional events, the promotional price would become their reference prices. Furthermore, when the level of retailer uncertainty is high, consumers devaluate the promotional product as a whole. Because the promotional offerings activate the persuasion knowledge of consumers and make them incorporate negative inference about the firm's motives into their valuation and consequently, consumers tend to hesitate to purchase.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.25-39
• /
• 2019

The purpose of this study is to analyze the management performance of hospitals by analyzing the ratio of stability, profitability ratio, and growth rate through the financial ratios of medical institutions using accounting information disclosure data of medical institutions, financial status table and profit and loss statement. The main goal is to analyze and analyze financial statements of medical institutions' accounting information in 2016 and 2017, analyze the difference and analyze the general characteristics and financial ratios by type, type and size of medical institutions, The financial characteristics of medical institutions were identified. The ratio of stability, profitability, and growth rate through financial ratios were compared and analyzed. In addition, we analyzed the correlation between the medical profit margin, the total asset profit margin, the medical profit margin rate, and the net profit margin of the medical institutions through the financial ratios of accounting information disclosure data of medical institutions. The main results are as follows: First, the size of the hospital and the size of the debt through the change of assets, liabilities and capital of the financial statement are increasing, the size of own capital is relatively decreased, and the management performance is getting worse It is showing. Second, the increase in average medical revenues in the income statement is small, and the average increase in net profit is small. Thus, medical institutions were able to confirm the difficulty in creating profits through medical activities. In addition, there was a large difference in the debt ratio, the stability ratio, and the profitability ratio of the general hospitals and the general hospitals according to the types of medical institutions, and the difference in the average financial ratios of national and public hospitals, school corporation hospitals, I could confirm. The correlation between independent variables in the correlation was -0.904 between the capital ratio and the total assets turnover ratio, -0.800 between the labor cost ratio and the hospital income ratio, and -0.631 between the labor cost ratio and the foreign profit ratio. In order to improve the management deterioration of hospitals by using accounting information disclosure data of medical institutions, it is necessary to have a large effect on the net profit margin of the medical care and the net profit margin of the total assets.

• Journal of Radiation Protection and Research
• /
• v.39 no.3
• /
• pp.142-149
• /
• 2014

Korea conducts a national health screening program to improve and check-up on public health and in recent years, the screening usage has been increased. Given the increased screening usage for radiographic exams, this study predicts the frequency of using radiographic exams and the exposure dose. This study estimates the usage of radiographic exams by isolating radiographic exams from the 2011 analysis of the national health insurance corporation, and estimates the public exposure dose by applying each procedure's dose table from UNSCEAR 2008. As a result of the analysis, in the 2011 National Health Screening, the average exposure dose per person is assumed to be 0.57 mSv, and depending on the type of screening program from the radiographic exam, an examinee could be exposed to between 0.2 mSv and 11.081 mSv. The frequency of using radiographic exposure was found to be 16,005,914 and the exposure dose was 6,311.76 person-Sv. The most frequent exam is the Chest X-ray, which was performed 1,070,567 (69.17%), and the UGI has the highest exposure dose at 5,217.94 person-Sv (82.67%). The outcome is categorized based on gender and age, excluding those under 39 years old. In all age groups, the screening usage and exposure dose are higher in females than in males. In particular, females between 50 and 54 years old have the highest screening usage (1,674,787, 10.5%) and exposure dose (701.59 person-Sv, 11.1%). As UGI accounts for 82.76% of procedures, except when done for medical purposes, if the government supports a voluntary UGI exam (which includes the UGI exam in the National Screening Program) or abolishes it completely, as seen overseas, the cost-effectiveness and validity of the UGI exam, as well as the exposure dose from the National Screening Program will all decrease significantly.

• Korean Journal of Agricultural Science
• /
• v.21 no.2
• /
• pp.103-110
• /
• 1994

Since the supply of the Southeast Asian tropical timber decreases and its price steeply increases in the international lumber market, door and window frame manufacturers in this country are eagerly searching for their substitutes. This is the first step to replace Southeast Asian tropical timber by low grade North American softwoods, whose reliable and steady supply is expected, but their appearances are not as good as the tropical timber. In this study, knot distribution on the softwood boards and their warp were examined The yield and production cost were also calculated. The average numbers of knots on a door frame were 7.2 for Douglas-fir and 3.4 for Western hemlock. Only 11% of the knots of Douglas-fir door frames are larger than 5cm in diameter, while are 35% of the knots of Western hemlock. The deformations of door frames, after 2 months air-drying, were measured with a warp table. The deformations of Western hemlock door frames were mostly less than 6mm, while those of Douglas-fir distributed in the range of 0.5 and 9.5mm. The yield of Western hemlock is higher than that of Douglas-fir. It can be concluded that the door frames made of the softwoods are compatible with those made of the tropical timber in most aspects except appearance.