• 제목/요약/키워드: cost method

검색결과 12,364건 처리시간 0.042초

중공 PC기둥을 적용한 복합공법의 공사비 분석 (Cost Analysis of Composite Method Using Hollow-PC Column)

  • 박병훈;김재엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.71-72
    • /
    • 2016
  • Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. Therefore, this study tries to investigate 'hallow PC column composite method(HPC composite method)' from the viewpoint of construction management and analyze the construction cost of the composite method. On the assumption that each comparative method was applied to the zone, the difference in construction cost between the two methods was analyzed. As a result, HPC composite method increased the initial investment cost because of its factor technology, but reduced transport cost, lifting cost, and installation cost through lightweight columns. This study analyzed only the difference in construction cost of HPC composite method so that it has the limitation in evaluating its economy. Therefore, to evaluate the economy of HPC composite method, it is considered to research more the construction cost of HPC composite method.

  • PDF

NUCLEAR FUEL CYCLE COST ESTIMATION AND SENSITIVITY ANALYSIS OF UNIT COSTS ON THE BASIS OF AN EQUILIBRIUM MODEL

  • KIM, S.K.;KO, W.I.;YOUN, S.R.;GAO, R.X.
    • Nuclear Engineering and Technology
    • /
    • 제47권3호
    • /
    • pp.306-314
    • /
    • 2015
  • This paper examines the difference in the value of the nuclear fuel cycle cost calculated by the deterministic and probabilistic methods on the basis of an equilibrium model. Calculating using the deterministic method, the direct disposal cost and Pyro-SFR (sodium-cooled fast reactor) nuclear fuel cycle cost, including the reactor cost, were found to be 66.41 mills/kWh and 77.82 mills/kWh, respectively (1 mill = one thousand of a dollar, i.e., $10^{-3}$ $). This is because the cost of SFR is considerably expensive. Calculating again using the probabilistic method, however, the direct disposal cost and Pyro-SFR nuclear fuel cycle cost, excluding the reactor cost, were found be 7.47 mills/kWh and 6.40 mills/kWh, respectively, on the basis of the most likely value. This is because the nuclear fuel cycle cost is significantly affected by the standard deviation and the mean of the unit cost that includes uncertainty. Thus, it is judged that not only the deterministic method, but also the probabilistic method, would also be necessary to evaluate the nuclear fuel cycle cost. By analyzing the sensitivity of the unit cost in each phase of the nuclear fuel cycle, it was found that the uranium unit price is the most influential factor in determining nuclear fuel cycle costs.

수술실의 원가배부기준 설정연구 (A Study on the cost allocation method of the operating room in the hospital)

  • 김희정;정기선;최성우
    • 한국병원경영학회지
    • /
    • 제8권1호
    • /
    • pp.135-164
    • /
    • 2003
  • The operating room is the major facility that costs the highest investment per unit area in a hospital. It requires commitment of hospital resources such as manpower, equipments and material. The quantity of these resources committed actually differs from one type of operation to another. Because of this, it is not an easy task to allocate the operating cost to individual clinical departments that share the operating room. A practical way to do so may be to collect and add the operating costs incurred by each clinical department and charge the net cost to the account of the corresponding clinical department. It has been customary to allocate the cost of the operating room to the account of each individual department on the basis of the ratio of the number of operations of the department or the total revenue by each operating room. In an attempt to set up more rational cost allocation method than the customary method, this study proposes a new cost allocation method that calls for itemizing the operation cost into its constituent expenses in detail and adding them up for the operating cost incurred by each individual department. For comparison of the new method with the conventional method, the operating room in the main building of hospital A near Seoul is chosen as a study object. It is selected because it is the biggest operating room in hospital A and most of operations in this hospital are conducted in this room. For this study the one-month operation record performed in January 2001 in this operating room is analyzed to allocate the per-month operation cost to six clinical departments that used this operating room; the departments of general surgery, orthopedic surgery, neuro-surgery, dental surgery, urology, and obstetrics & gynecology. In the new method(or method 1), each operation cost is categorized into three major expenses; personnel expense, material expense, and overhead expense and is allocated into the account of the clinical department that used the operating room. The method 1 shows that, among the total one-month operating cost of 814,054 thousand wons in this hospital, 163,714 thousand won is allocated to GS, 335,084 thousand won to as, 202,772 thousand won to NS, 42,265 thousand won to uno, 33,423 thousand won to OB/GY, and 36.796 thousand won to DS. The allocation of the operating cost to six departments by the new method is quite different from that by the conventional method. According to one conventional allocation method based on the ratio of the number of operations of a department to the total number of operations in the operating room(method 2 hereafter), 329,692 thousand won are allocated to GS, 262,125 thousand won to as, 87,104 thousand won to NS, 59,426 thousand won to URO, 51.285 thousand won to OB/GY, and 24,422 thousand won to DS. According to the other conventional allocation method based on the ratio of the revenue of a department(method 3 hereafter), 148,158 thousand won are allocated to GS, 272,708 thousand won to as, 268.638 thousand won to NS, 45,587 thousand won to uno, 51.285 thousand won to OB/GY, and 27.678 thousand won to DS. As can be noted from these results, the cost allocation to six departments by method 1 is strikingly different from those by method 2 and method 3. The operating cost allocated to GS by method 2 is about twice by method 1. Method 3 makes allocations of the operating cost to individual departments very similarly as method 1. However, there are still discrepancies between the two methods. In particular the cost allocations to OB/GY by the two methods have roughly 53.4% discrepancy. The conventional methods 2 and 3 fail to take into account properly the fact that the average time spent for the operation is different and dependent on the clinical department, whether or not to use expensive clinical material dictate the operating cost, and there is difference between the official operating cost and the actual operating cost. This is why the conventional methods turn out to be inappropriate as the operating cost allocation methods. In conclusion, the new method here may be laborious and cause a complexity in bookkeeping because it requires detailed bookkeeping of the operation cost by its constituent expenses and also by individual clinical department, treating each department as an independent accounting unit. But the method is worth adopting because it will allow the concerned hospital to estimate the operating cost as accurately as practicable. The cost data used in this study such as personnel expense, material cost, overhead cost may not be correct ones. Therefore, the operating cost estimated in the main text may not be the same as the actual cost. Also, the study is focused on the case of only hospital A, which is hardly claimed to represent the hospitals across the nation. In spite of these deficiencies, this study is noteworthy from the standpoint that it proposes a practical allocation method of the operating cost to each individual clinical department.

  • PDF

사례분석에 의한 HPC공법의 공사비 분석 (Construction Cost Analysis of HPC Method by PC Construction Project Cases)

  • 노주성;김재엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.101-102
    • /
    • 2017
  • This study was carried out as basic study to apply to construction site the HPC method which is being developed. The construction cost of HPC method was analyzed in comparison with conventional method (half slab method). With regard to research method, it was decided that data on construction work carried out by half slab method was analyzed. According to the results of study, in case of being applied to the construction work using a divided column, the number of columns was decreased. So, it was shown that member production cost, and transport and assemblage cost reduced. In case of being applied to construction work using an undivided column, the analysis showed that there was little difference in construction cost. Therefore, the analysis showed that, if HPC construction method was applied to large structure using a large column, the construction cost was reduced to some extent in comparison with conventional half slab method.

  • PDF

재고비용할당을 위한 비례적 접근법 (The Proportional Method for Inventory Cost Allocation)

  • 이동주
    • 산업경영시스템학회지
    • /
    • 제41권4호
    • /
    • pp.220-227
    • /
    • 2018
  • The cooperative game theory consists of a set of players and utility function that has positive values for a subset of players, called coalition, in the game. The purpose of cost allocation method is to allocate the relevant cost among game players in a fair and rational way. Therefore, cost allocation method based on cooperative game theory has been applied in many areas for fair and reasonable cost allocation. On the other hand, the desirable characteristics of the cost allocation method are Pareto optimality, rationality, and marginality. Pareto optimality means that costs are entirely paid by participating players. Rationality means that by joining the grand coalition, players do not pay more than they would if they chose to be part of any smaller coalition of players. Marginality means that players are charged at least enough to cover their marginal costs. If these characteristics are all met, the solution of cost allocation method exists in the core. In this study, proportional method is applied to EOQ inventory game and EPQ inventory game with shortage. Proportional method is a method that allocates costs proportionally to a certain allocator. This method has been applied to a variety of problems because of its convenience and simple calculations. However, depending on what the allocator is used for, the proportional method has a weakness that its solution may not exist in the core. Three allocators such as demand, marginal cost, and cost are considered. We prove that the solution of the proportional method to demand and the proportional method to marginal cost for EOQ game and EPQ game with shortage is in the core. The counterexample also shows that the solution of the proportional method to cost does not exist in the core.

메타분석을 이용한 임상영양서비스의 비용-효과성 평가 (Evaluation of Cost-Effectiveness of Medical Nutrition Therapy : Meta-Analysis)

  • 김현아;양일선;이해영;이영은;박은철;남정모
    • Journal of Nutrition and Health
    • /
    • 제36권5호
    • /
    • pp.515-527
    • /
    • 2003
  • Objectives: A meta-analysis of the literatures was conducted to evaluate the cost-effectiveness of medical nutrition therapy by dietitians. Methods : The 30 studies were identified from a computerized search of published research on MEDLINE, Science-Direct and the PQD database until May, 2002 and a review of reference lists. The main search terms were“dietitian”,“dietary intervention”,“nutrition intervention”, “cost”,“cost-effectiveness”and“cost-benefit analysis”. The subgroup analysis was performed by publication year, study design, intervention provider, type of patient (in/out-patient) and type of cost (total cost/direct cost). Two reviewers independently selected trials for inclusion, assessed the quality and extracted the data. Results : The 30 studies were identified using the electric database search and bibliographies. The 17 trials were eligible for inclusion criteria, then the systematic review and a meta-analysis were conducted on effectiveness and cost-effectiveness of medical nutrition therapy. The quality of the studies was evaluated using the quality assessment tool for observational studies. The quality score was 0.515 $\pm$ 0.121 (range : 0.279-0.711, median : 0.466). The meta-analysis of 17 studies based on the random effect model showed that medical nutrition therapy was highly effective in treating the diseases (effect size 0.3092 : 95% confidence interval 0.2282-0.3303). The vote-counting method, one of meta-analysis methods, was applied to evaluate the cost-effectiveness of medical nutrition therapy conducted by dietitians. Two criteria (method 1, method 2) for voting were used. The calculated p-values for method 1 (more conservative method) and method 2 (less conservative method) were 0.1250 and 0.0106, respectively. Medical nutrition therapy by dietitians was significantly cost-effective in the method 2. Conclusion. This meta-analysis showed that the effectiveness of medical nutrition therapy was statistically significant in treating disease (effect size 0.3092), and that the cost-effectiveness of medical nutrition therapy was statistically significant in the method 2 (less conservative method) of vote counting. (Korean J Nutrition 36(5): 515~527, 2003)

프리캐스트 콘크리트 복합화공법의 경제성 분석에 관한 연구 (A Study on the Economical Analysis of the Composite Precast Concrete Method)

  • 유대호;이한복;안재철;강병희
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2007년도 정기학술발표대회 논문집
    • /
    • pp.113-118
    • /
    • 2007
  • 이번 연구는, 실제 공사 현장에서 적용할 수 있는 프리캐스트 복합화 콘크리트 공법을 선정하였다. 현장에서 프리캐스트 복합화 콘크리트 공법의 실제 공사비와 철근콘크리트 공법에 적용되는 추정 공사비를 비교하였다. 고강도 콘크리트와 프리스트레스트 콘크리트의 사용함으로서, 50%이상의 콘크리트 양을 줄일 수 있었지만, 프리캐스트 콘크리트 복합화공법의 주된 비용인 생산비와 운송비를 포함한 재료비는 큰 차이가 없었다. 그러나 철근콘크리트인 경우, 철근과 거푸집 노무비가 30%를 차지하며 추가비용으로 비계, 가설공사가 큰 비중을 차지하는 철근콘크리트 공법이 프리캐스트 콘크리트 복합화 공법과 비교하여 2배정도의 시공비용이 소요된다. 위의 결과를 분석하면 프리캐스트 복합화 공법이 철근콘크리트 공법의 비용보다 11%의 훌륭한 비용절감 효과가 나타났다.

  • PDF

Advanced Depreciation Cost Analysis for a Commercial Pyroprocess Facility in Korea

  • Kim, Sungki;Ko, Wonil;Youn, Saerom;Gao, Ruxing;Chung, Yanghon;Bang, Sungsig
    • Nuclear Engineering and Technology
    • /
    • 제48권3호
    • /
    • pp.733-743
    • /
    • 2016
  • The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

해외 건설엔지니어링분야 대가기준 사례분석을 통한 개선방향 마련 (The Establishment of Improvement Direction through Case Analysis of Cost Standards in Overseas Construction Engineering)

  • 고현아;한재구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.165-166
    • /
    • 2020
  • The standard for the cost calculation in the field of domestic construction engineering can be largely divided into the construction cost ratio method and the actual cost addition method. However, the standard for calculating the cost of the construction cost ratio method is a trend to switch to the actual cost addition method due to limitations such as not reflecting the characteristics of the construction. Therefore, this study aims to derive implications by investigating and analyzing examples of cost standards in the field of overseas construction engineering, such as the United States, and deriving directions for improvement in domestic cost standards in the future.

  • PDF

열병합발전에서 비용배분 방법론의 고찰 (Consideration of Cost Allocation Methodology on Cogeneration)

  • 김덕진
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.1197-1202
    • /
    • 2009
  • Cost allocation on cogeneration is a methodology dividing the input of common cost to electricity cost and heat cost. In the cost allocation methodology of the electricity and heat on a cogeneration, there are energy method, work method, proportional method, benefit distribution method, reversible work method, various exergetic methods, and so on. In previous study, various cost allocation methodologies have been applied and analyzed on a gas-turbine cogeneration producing the 33.1 MW of electricity and the 32.2 Gcal/h of heat, a steam-turbine cogeneration producing the 22.2 MW of electricity and the 44.3 Gcal/h of heat, and combined-cycle cogeneration producing the 314.1 MW of electricity and the 279.4 Gcal/h of heat. In this study, we integrately analyze the results of previous studies and examine the generality and rationality each methodology. Additionally, a new point of view on the values of alternative electricity efficiency and alternative heat efficiency in the previous methodologies was proposed. As the integrated result, we conclude that reversible work method of various common cost allocation methodologies is most rational.

  • PDF