• International journal of advanced smart convergence
• /
• 제7권2호
• /
• pp.1-6
• /
• 2018

In this paper, we propose an automatic left ventricle segmentation method in computed tomography angiography (CTA) using separating energy function. First, we smooth the images by applying anisotropic diffusion filter to remove noise. Secondly, the volume of interest (VOI) is detected by using k-means clustering. Thirdly, we divide the left and right heart with split energy function. Finally, we extract only left ventricle from left and right heart with optimizing cost function including orientation term.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.69-75
• /
• 2015

Building has required the repair money to improve or maintain the decent living condition continuously after construction. It needs to grasp the building deterioration to decide the scope and contents before it is repaired. Under various conditions such as physical, social and financial constraints, the repair plan would be prepared. Among constraints, the cost is indispensible to specify the repair time, repair scope and target. The required cost would be planned to preparation over the years. In this paper, it aimed at providing the repair strategy of the public rental housing in repair time, using the cumulative cost model which is $3^{rd}$ function. In the $3^{rd}$ function, the inflection point should exist in the line. And there are two types in the cumulative model, First, if the maximum cost be shown, the repair time would be provided. Second, if the maximum cost not be shown, the cumulative function should be proportionally increased and the repair strategy is properly provided with a short cycle. In results of this study, 11 items would provide the repair time. These cumulative function would be repaired about 4 years after constructed, and after about 4 years, the cumulative function would be continuously increased.

• 수산경영론집
• /
• 제51권3호
• /
• pp.17-31
• /
• 2020

The purpose of this study is to identify economic situation on scale of tuna distant longline fishery by analyzing its economies of scale using the cost function. To analyze its economics of scale, the deep-sea fishing statistics were used from 2012 to 2016. In detail, the number of panels for estimating the cost function was 68 tuna distant longline vessels from 2012 to 2016, and the total number of observations over the five years were 340. As a final model, the two-way fixed effect model based on the translog cost function was adopted through the F test, the Breusch-Pagan test and the Hausman test. As a result of the analysis, it was found that tuna distant longline fishery between 2012 and 2014 was diseconomies of scale, the fishery between 2015 and 2016 was economies of scale. However, the economic indicators of the scale from 2012 to 2016 were almost close to zero, indicating that the constant returns to scale, the optimal scale, were reached. Therefore, in the situation where the amount of fishery resources in the world continues to decrease, it is necessary to prepare a method to obtain economic benefits through scale maintenance and reduction rather than indiscriminate scale expansion.

• 한국음향학회지
• /
• 제20권3호
• /
• pp.8-14
• /
• 2001

본 논문에서는 부밴드 적응 필터 구조에서 음향 신호에 부가된 잡음을 제거하기 위한 새로운 비용함수와 블록 공액 경사 알고리듬을 제안하였다. 제안한 비용함수를 위하여 부밴드로 나뉘는 신호를 블록으로 구성한 후 각 대역에서의 신호를 하나의 블록으로 조합하였다. 이러한 과정을 통해 제시된 비용함수는 부밴드 적응 필터 구조에서 적응 필터에 대한 2차 형식을 가짐으로서 제안한 알고리듬의 수렴성이 보장되었다. 또한 제안한 비용함수를 최소화하는 알고리듬으로 사용한 부밴드 블록 공액 경사 알고리듬은 전대역 블록 공액 경사 알고리듬에 비해 잡음제거 성능이 뛰어난 것을 컴퓨터 모의 실험으로 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.221-228
• /
• 2007

품질기능전개(Qualify Function Deployment, QFD)는 새로운 제품의 품질을 보증하기 위한 전략으로써 일본에서 처음 소개된 기법이다. QFD는 1972년 Mitsubish 중공업의 고베 조선소에서 처음 개발되어 사용되었고, 세계적으로 많은 기업들에서 제품을 개발하기 위한 설계단계부터 많이 사용해 오고 있다. QFD와 관련하여 많은 연구들이 수행되어져 오고 있지만, 비용을 고려한 품질기능전개(Cost-based Quality Function Deployment, QFCD)와 관련된 연구들은 활발하게 수행되고 있지 못한 실정이다. QFD 전개에서 비용을 고려하지 않고 수행되어진다면 현실적이지 못한 결과를 초래할 수 있다. 따라서 본 연구는 QFCD 개념과 수행절차를 소개함으로써 제품개발결과에 대한 효과성과 효율성을 제고하는데 그 목적이 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.189-199
• /
• 2002

This study is intended to propose a systematic procedure for the development of the conditional assessment based on the safety of structures and the cost effective performance criteria for designing and upgrading of bridge structures. As a result, a set of cost function models for a life cycle cost analysis of bridge structures is proposed and thus the expected total life cycle costs (ETLCC) including initial (design, testing and construction) costs and direct/indirect damage costs considering repair and replacement costs, human losses and property damage costs, road user costs, and indirect regional economic losses costs. Also, the optimum safety indices are presented based on the expected total cost minimization function using only three parameters of the failure cost to the initial cost (${\tau}$), the extent of increased initial cost by improvement of safety (${\nu}$) and the order of an initial cost function (n). Through the enough numerical invetigations, we can positively conclude that the proposed optimum design procedure for bridge structures based on the ETLCC will lead to more rational, economical and safer design.

• 기술혁신학회지
• /
• 제4권2호
• /
• pp.172-181
• /
• 2001

This is a paper to understand the economic effects of the measurement standards by translog cost function. The data, as of the end of 1998, are from a survey of 514 firms in Korean industry. The analysis is compared to that of 1992 data analysis to check the trend. There are a little differences on the estimated coefficients, but there is no basic difference on trend of economic effects. The Investment on measurement standards have been contributed positively on the major managerial indicators such as productivity, profit, and so on.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.77-83
• /
• 1990

A model for the economic design of an pn control charts with an assignale cause is presented and the loss-cost function for control schemes using these charts is derived. By minimizing this function with respect to the three control variables, namely, the sample size, the sampling interval and acceptance number, the economically optimal control plan can be optained. The article shows what influence increasing or decreasing condition, according to changeability of the size of these factors, of expected cost can have on the economy when an attribute control chart is used.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.284-289
• /
• 2005

A structural design system is developed for the optimum design of double hull tankers based on the multi-objective function method. As a multi-objective function method, Pareto optimal based random search method is adopted to find the minimum structural weight and fabrication cost. The fabrication cost model is developed by considering the welding technique, welding poses and assembly stages to manage the fabrication man-hour and process. In this study, a new structural design is investigated due to the rapidly increased material cost. Several optimum structural designs on the basis of high material cost are carried out based on the Pareto optimal set obtained by the random search method. The design results are compared with existing ship, which is designed under low material cost.

• KIEAE Journal
• /
• 제9권1호
• /
• pp.107-113
• /
• 2009

The energy cost is resulted from the energy use. Its sources are divided into some types and depended on the building use or energy-use type. The energy cost should be affected by the amount of the energy use. The cost could be calculated to consider various factors such as the insulation, heating type, building shape and others. But it can not consider all of the affect factors to the energy cost and need to categorize the factors to the condition for estimating the cost. In this paper, it aimed at providing the estimation model in linear equation and multiple linear regression, utilizing the building exterior condition and management characteristics in apartment housing. Its survey are conducted in two parts of management characteristics and building exterior condition. The correlation analysis is conducted to get rid of the multicolinearity among the inputted factors. The number of linear equation model is 11 and includes the 1st, 2nd and 3rd equation function, power function and others. Among these, it suggested the 2nd and 3rd function and power function in terms of the statistics. In multiple linear regression model, the building volume and management area are inputted to the estimation.