• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.2
• /
• pp.129-136
• /
• 2011

The moisturizing effect and stability of a cream containing 0.25 % Inula britannica flower ethyl acetate fraction were investigated. The pH, viscosity, and absorbance were measured under 4 different temperature conditions(4, 20, 37, and $45^{\circ}C$) and under the sun light at 2 week intervals for 12 weeks. The variations in pH and viscosity of all experimental creams were similar to those of control cream. The absorbance variations of the extract from experimental cream at 330 nm were in the order: under the sun > 45 > 37 > 25 > $4^{\circ}C$. It shows that ethyl acetate fraction in the cream can be oxidized under the sun. In addition, any change in color or smell was not observed through 12 weeks of the experimental period. These results showed that the cream were stable. Accordingly, it is suggested that further study is needed to provide more information to the manufacturers, who are seeking for the application of the extract to improve the anti-oxidant and antibacterial activities and stability of cosmetic products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.313-319
• /
• 2022

In this study, the stability of cream containing 1% of cannabidiol (CBD) with more than 99% extracted from domestic Cannabis sativa was evaluated. The pH, hardness, content, and chromaticity were measured at intervals of 2 weeks under storage conditions for each temperature for 12 weeks (4 ℃, 25 ℃, 37 ℃, and 45 ℃). The pH of the experimental group containing 1% of CBD tended to decrease more than that of the control group. As a result of measuring the change in the content of CBD in the cream under each temperature for 12 weeks using HPLC, the difference in the amount of decrement according to temperature was confirmed. It was confirmed that as a result of measuring the chromaticity using color difference meter, the yellowness of the cream containing CBD increased according to the increase by the storage period and temperature compared to the control group. From the above results, it was confirmed that the content decrease and color change according to the temperature of the pH 5 ~ 6 cream formulation containing CBD. When CBD is applied to medicine and cosmetic formulations in the future, it is considered that research and development should be conducted in consideration of the change in the quantity and physicochemical quality of CBD under the temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.29-42
• /
• 2001

We had prepared MLV liposome with Hibiscus Esculentus Ext.(HEE) which have fluorescent light in order to evaluate its percutaneous absorption about hairless rat skin. Then we investigated particle size of MLV using confocal laser scanning microscope(CLSM) and transmission electron microscope(TEM), respectively. Stability of MLV liposome and penetration of MLV liposome to hairless rat skin was measured by CLSM. As a result of experiments, MLV was globular shape and the rage of particle size was 0.3-0.5$\mu\textrm{m}$ mostly. Cream-type MLV had high stability comparatively. When we treated with MLV to rat skin, skin penetration was enhanced, especially, the optimum concentration of MLV on penetration to rat skin was 10%. Optimum penetration time was 6hr-12hr. And MLV-type HEE was more effective on percutaneous absorption than HEE-cream or liposome-type HEE.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.219-238
• /
• 2003

Indole-3-acetic acid (IAA) molecule has been successfully encapsulated in biocompatible inorganic matrix in order for the cosmetic application such as superfacial fine line reduction. The encapsulation was realized through chemical reaction involving simultaneous formation of inorganic lattice and 1M giving rise to an 1M-inorganic nanohybrid (IAA-brid) which shows excellent storage stability and sustained releasing property of indole-3-acetic acid. The clinical efficacy of essence cream containing IAA-brid as anti-wrinkle formulation was also carefully evaluated by measuring the roughness of the skin replica before and after treatment. Upon administration of the cream on the eye-area, the fine-line is drastically reduced.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Korea-Australia Rheology Journal
• /
• v.15 no.3
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.24-30
• /
• 1998

Inhibitory effects of the new material obtained from Areca catechu seed (CC-516) according to a special process, and its applicability to the skin as a cosmetic raw material in terms of its efficacy were presented. Areca catechu extract out of 150 medicinal plants, exhibited high inhibitory effect on the porcine pancreatic elastase ($IC_{50}$ : $40.8{\mu}$g/ml). It also had an inhibitory effect on the human leukocyte elastase ($IC_{50}$ : 48.1$\mu$g/ml), hyaluronidase ($IC_{50}$ : $416{\mu}$g/ml), antioxidative activity ($IC_{50}$ : $45.4\mu$g/ml) and free radical scavenging activity ($SC_{50}$ : $10.2{\mu}$g/ml). The cream contained 3％ of CC-516 improved skin hydration above 16.5％. Especially, the skin elasticity increases more than 35% and skin wrinkles decreased more than 23％. The CC-516 was designed to be utilized in cosmetology. The cream containing 3％ of this product has not only protecting effect on the skin mechanical properties provided by the collagen and the elastin in the derm but also restructuring effect of scarring or aging tissue.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.43-49
• /
• 2012

In this study, we investigated the antibacterial activity and stability of a cream containing Hippophae rhamnoides leaf extract. The MIC values of ethyl acetate fraction from an H. rhamnoides leaf on Escherichia coli, Pityrosporum ovale, Propionibacterium acnes and Staphylococcus aureus were 0.5%, 0.25%, 0.25% and 0.06%, respectively. Stability evaluations, pH, viscosity and absorbance of the cream containing 0.25% ethyl acetate fraction of H. rhamnoides, were performed. The cream was measured under 4 different temperature conditions under sunlight at 2-week intervals for 12 weeks. The viscosity and pH were measured by a comparison of the experimental cream with a similar control cream. The H. rhamnoides extract was found to have contributed to the stability of the emulsion product via a protective effect in maintaining the viscosity of the cream against sunlight. The absorbance variations of the experimental cream at 270 nm were, under sunlight; $45^{\circ}C$, $37^{\circ}C$, $25^{\circ}C$, and $4^{\circ}C$. In addition, any change in color or smell was not observed through the 12 weeks of the experimental period. These results indicated that the cream containing 0.25% ethyl acetate fraction of H. rhamnoides leaf extract was stable. Accordingly, this suggests that further study is needed to provide additional information for manufacturers, who are seeking the application of the extract to improve anti-oxidant and antibacterial activities and the stability of cosmetic products.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.4
• /
• pp.293-298
• /
• 2003

This study was attempted to develop the physicochemical ad morphological stability test methods for the cream and lotion formulations among the cosmetic foundations and to provide the guidance for the stability methods with respect to basic emulsions and creams. With these developed stability test methods, we can evaluate the expired date or life time of the available basic cosmetics, especially basic lotions ad creams. Also, the stability test methods established in this study can be used as a guideline to test physical and morphological stability of cosmetics in the future. Thus, we selected two types of basic cosmetics such as lotions and creams made by four different cosmetic companies ad applied them to the stability test methods depending on the temperature changes such as temperature cycling and freezing-thawing cycling test. After the temperature changes, the conductivity, turbidity, particle size, creaming ratio and pH changes of the creams and lotions were evaluated and morphological changes such as crystal formation, odor, color and feeling of the creams and lotions were also tested. As the results of the stability tests, all the tested creams and lotions except for one lotion were stable. Therefore, it may be concluded that these short-term accelerated stability tests as physical stability test depending on the temperature change study were suitable for the stability testing methods for the basic cosmetics and may be useful for the establishment of the guideline for the stability test of cosmetics.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.