• Tribology and Lubricants
• /
• 제19권1호
• /
• pp.31-35
• /
• 2003

This paper reports the studies on the wear-corrosion behavior of ductile cast iron in the various pH environments. In the variety of pH solutions, corrosion and wear-corrosion loss of GCD 600 were investigated. Also, the anodic polarization test of GCD 600 using potentiostat/galvanostat was carried out. And rubbed surface of GCD 60 using scanning electron micrographs after immersion and wear-corrosion test was examined in the environment of various pH values. The main results are as following In alkali zone, the wear-corrosion loss of GCD 600 increases, but corrosion loss decreases. The unevenness and crack of wear-corrosion surface in neutral zone becomes duller than that in alkali zone. As the corrosive environment is acidified, wear-corrosion behavior of GCD 600 with passing immersion time becomes sensitive.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.39-45
• /
• 2015

This research aims to study an effect of sodium chloride solution concentration on the corrosion rate of AA1100 aluminium alloy and SGACD zinc coated steel lap joint with a test duration of 30 days and a test temperature of $45^{\circ}$. The summarized results are as follows. Increase of the NaCl solution concentration increased the weight loss of Al, corrosion rate of Al, weight loss of Fe and also decreased the corrosion rate of Fe. Increase of the test duration affected to increase the weight loss and corrosion rate of Al and also decrease the weight loss and corrosion rate of Fe. The corrosion that was formed in a lap joint consisted of the uniform corrosion on the surface of the metals and the galvanic corrosion in the lap area of the joint. The maximum weight loss of AA 1100 aluminium and SGACD zinc coated steel that was occurred in the sodium chloride with 3.25% was 2.203% and 3.208%, respectively.. The maximum corrosion rate of AA 1100 aluminium and SGACD zinc coated steel that was occurred in 4.00% and 3.5% sodium chloride solution was 0.156 mm/year and 0.479 mm/year, respectively.

• 수산해양교육연구
• /
• 제19권1호
• /
• pp.129-136
• /
• 2007

The component parts of the shell plate of a ship are steel. but the screw propeller or the bow thruster is a compound of bronze, nickel and aluminum. On account of the these different components between metals of the shell plate, the screw propeller and the bow thruster, which are underwater, the shell plate of a ship is corroded by the action of ionization. Authors investigated the corrosion loss of the zinc anodes which were attached to the bottom shell of the training ship Kaya for about two years. The obtained results were as follows:1. In case of the shell plate the difference of the corrosion loss according to port and starboard was almost nothing. But the corrosion loss of the forward part was more than that of the aftward part.2. There was little difference in the corrosion loss between the forward and the aftward part on the bilge keel.3. The corrosion loss of the fore, midship and aft part on the false keel were 24.7%, 22.4% and 23.9% respectively.4. The corrosion loss of the fore and the aft part on the false keel was more than that of the midship part.5. The corrosion loss of the bow thruster was greater than any other parts.6. The nearer the zinc anode to the screw propeller the more the corrosion loss on the stern frame, and the situation was also same as on the rudder.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1111-1133
• /
• 2015

Rebar corrosion in concrete is one of the main causes of reduction of service life of reinforced concrete buildings. This paper presents the influence of rebar corrosion on the structural behavior of reinforced concrete (RC) buildings subjected to strong earthquake ground motion. Different levels of rebar corrosion scenarios were applied on a typical four story RC frame. The deteriorated conditions as a result of these scenarios include loss in cross-sectional area and loss of mechanical properties of the reinforcement bars, loss in bond strength, and loss in concrete strength and its modulus of elasticity. Dynamic analyses of the frame with different corrosion scenarios are performed with selected strong earthquake ground motion records. The influences of degradation in both concrete and reinforcement on structural behavior are investigated by comparing the various parameters of the frame under different corrosion scenarios with respect to each other. The results show that the progressive deterioration of the frame due to rebar corrosion causes serious structural behavior changes such as change in failure mode. The intensity, propagation time, and extensity of rebar corrosion have very important effects on the level of degradation of steel and concrete, as well as on the earthquake behavior of the structure.

• 수산해양기술연구
• /
• 제17권1호
• /
• pp.13-18
• /
• 1981

한국국적을 가진 일반화물선 30척과 원목운반선 15척의 외판부식도를 선령별로 조사한 결과는 다음과 같다. 1. 일반화물선 1) 전평균부식도는 어느 선령급에서나 경흘수선부가 가장 크다. 2) 선수미방향의 전평균부식도는 어느 선령급에서나 선수부가 중앙부나 선미부보다 크나, 큰 차이는 없다. 3) 깊이 방향의 부식도는 선령 16년 이하에서 건현부, 만재흘수선부, 하부만곡부, 경흘수선부의 순으로 크다. 또 35년에 있어 부식도는 경흘수선부와 만재흘수선부는 건현중앙부에 약 3배, 상부만곡부는 그것의 약 2배 되어 수선부가 가장 부식이 심함을 나타낸다. 2. 원목운반선 1) 전평균부식도는 어느 선령급에서나 상부만곡부가 가장 크다. 2) 선수미방향의 부식도는 어느 선령급에서나 선수부가 가장 크나, 큰 차이는 없다. 3) 깊이 방향의 부식도는 어느 선령급에서나 건현부가 가장 작고, 상부만곡부가 가장 커서 그 부식도는 건현부의 약 2배가 된다. 3. 일반화물선과 원목운반선. 원목운반선의 부식도의 전평균은 일반화물선의 그것의 약 3배나 된다.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.97-101
• /
• 2004

This paper reports the studies on the wear-corrosion behavior of Al-Mg alloy in various pH environments. In various pH of sea water, corrosion and wear-corrosion loss of Al-Mg alloy were investigated. Also, the polarization test of Al-Mg alloy using potentiostat/galvanostat was carried out. And the rubbed surface of Al-Mg alloy using scanning electron micrographs after wear-corrosion test was examined in various pH values of sea water. The main results are as following : The polarization resistance of Al-Mg alloy in pH 4 solution is higer than that in pH 6.7 solution, and the corrosion current density in pH 4 is controlled than in pH 6.7 solution. The wear-corrosion loss of Al-Mg alloy with lowering pH becomes sensitive. As the oxide product of Al-Mg alloy appears granular structure and exholiation phenomenon, wear-corrosion loss of Al-Mg alloy increases.

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.211-216
• /
• 2003

This paper was studied on the corrosion and corrosion-wear behavior of chromium (Cr) plating in the acidic environments. In the various pH of acidic solutions, the electrochemical polarization test and wear-corrosion test of Cr plating were carried out. And thus potential, corrosion current density and corrosion-wear loss behaviour of Cr plating are investigated.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.98-101
• /
• 2003

The Electrical Resistance Probe of carbon steel and weight loss coupons were exposed in atmosphere and in the lake water of Hanoi. The comparison of data received by two methods after one year exposure was presented. The correspondence of the data of these methods on the exposure time in both environments showed a capacity of using Electrical Resistance Probe in Vietnamese natural corrosion testing of Carbon steel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.731-739
• /
• 2006

Corrosion and lassitude are very important in the metal construction Currently, the shot peening is used much for removing the defect on the surface, improving the fatigue strength on surface. In this study. the influence of shot peening to the corrosion property were investigated in 3.5% NaCl, 10% HNO3 + 3% HF. 6% FeC13. The immersion test was performed on two kind of specimen(Removed corrosion product. RCP and Continuous immersed specimen: CIS). The immersion periods was 3600hours. Corrosion potential. weight loss, and fatigue crack growth characteristics were investigated. The result, shot peening in corrosion potential showed stable potential. Also, shot peening displayed small Weight loss than un peening. And Fatigue crack resistivity of shot peening in corrosion solution's fatigue crack appeared greatly than un peening.

• 수산해양기술연구
• /
• 제18권1호
• /
• pp.17-23
• /
• 1982

한국국적의 유조선 35척의 외판 및 격벽의 부식도를 선령별로 조사한 결과를 요약하면 다음과 같다. 1. 선령 12년급의 외판의 평균부식도는 경흘수선 및 하부 만곡부선에서는 선수부가, 건현 및 상부만곡부선에서는 중앙부가, 양재흘수선에서는 선미부가 가장 높다. 2. 선령 20년급의 외판의 평균부식도는 경흘수선 및 상.하부만곡부선에서는 선수부가, 건현중앙선에서는 중앙부가, 만재 흘수선에서는 선미부가 가장 높다. 3. 측수조와 중앙유조의 횡격벽의 평균부식도는 어느 선령에서나 정부선, 상부선, 중앙선에서는 측수조가 높고, 하부선과 저부선에서는 중앙유조가 높다. 4. 중앙유조와 양측 유조의 횡격벽부식도 어느 선령에서나 중앙유조의 횡격벽 쪽이 높다. 5. 중앙유조의 종.횡격벽의 부식도는 격벽의 중앙선상부에서는 어느 선령에서나 종벽부 쪽이 높다. 6. 내부수조 및 중앙유조의 횡격벽과 같은 높이에 있는 선각외판의 건현부의 평균부식도를 비교하면, 격벽상부의 부식도가 외판의 그것보다 크다.