• Physical Therapy Korea
• /
• v.21 no.3
• /
• pp.20-27
• /
• 2014

The purpose of this study was to compare the intra-rater and inter-rater reliability of three methods for measuring iliotibial tract length in 40 knees of 20 subjects. The measurements were performed by two examiners and one assistant. The length of the iliotibial tract was measured using three methods: the first used a modified Ober test with an inclinometer, the second used a modified Ober test with a marker, and the third used active adduction test with a marker in the supine position. Each examiner used the three methods in two sessions. For the first method, the inclinometer value was recorded manually. For the second and third methods, Image J analysis software was used to analyze the photographs taken. The intra-rater and inter-rater reliability of the measured value was assessed by means of intra-class correlation coefficients [ICC (3,1)] and the standard error of measurement. The intra-rater reliabilities of the three methods were excellent (ICC=.97, .95, and .94, respectively), and the inter-rater reliabilities of the first and second methods were fair to good (ICC=.64 and .65, respectively). The inter-rater reliability of the third method was excellent (ICC=.88). Our results suggest that the active adduction test is an objective and qualitative measurement method for measuring iliotibial tract length. We recommend that the active adduction test be used for measuring iliotibial tract length in the clinical setting.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.2
• /
• pp.99-109
• /
• 1985

The present studies were carried out to obtain some basic informations of the breeding of tobacco varieties. Genetically divergent 8 varieties, 3 flue-cured, 2 burley and 3 sun-cured tobaccos, were used in half diallel cross. In order to analyze the heterosis, combining abilities, modes of inheritance and correlations for some agronomic and chemical characters, 8 parents and 28 $F_1$ were tested. The results obtained were summarized as follows: The percentages of heterosis for stem diameter, internode length and total sugar content in $F_1$ hybrid were 3.6%, 3.1% and 10.6%, whereas these for days to flower, total alkaloids and leaves per plant were -6.3%, -6.9% and -5.0%, respectively. Yield had significant positive genotypic correlations with plant height, days to flower and leaf length, but negative with internode length and total sugar content. It also had significant prositive phenotypic correlations with plant height, days to flower, leaves per plant, leaf length, leaf width and leaf shape index (Leaf length/leaf width). General (GCA) and specific combining abilities (SCA) for all characters of $F_1$ hybrid were significant. The effects of GCA were positive on yield, plant height, stem diameter, leaves per plant and days to flower of Burley 21. And those were positive on yield, leaf shape index and plant height, but negative on leaves per plant and total nitrogen of Hicks. The effects of SCA for yield and leaves per plant were greater than those of others on the combinations of Coker 139 and Burley type, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.421-428
• /
• 2015

This study was carried out to investigate the relationship between anatomical characteristics and growth rate of Quercus rubra from different origins of seed. Anatomical characteristics showed that all Quercus rubra species were ring-porous woods with 1~3 layers of large pores in earlywood, but the latewood had small pores oriented in radial direction. There were slight differences in libriform fiber length and vessel element diameter in the earlywood among different provenance origins of seeds. In growth rate, the libriform fiber length and vessel element diameter was negative correlation in the earlywood, but not correlative in the latewood, and vessel element length was not correlative in the early and latewood, Volumetric composition of libriform fiber and ray in latewood was higher than those in ear lywood, and a higher composition of vessel element was observed in earlywood. Ray height was the range of from 11 to 15 cells.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.53-67
• /
• 2020

The purpose of this study is to analyze the foot shape and size specification of male high school students. 3D modeling programs such as 'Artec Studio', 'CATIA', and 'Auto CAD' measured the 3D scan data of 361 male high school students provided by KATS. Through principal factor analysis, 10 factors were extracted, including foot length, medial-lateral ratio, and foot length ratio. As the result of the cluster and ANOVA with post-hoc test (Duncan method), the differences among types were clarified. Type 1 (24.7%) represented outward medial-lateral ratio (M-L ratio) with the lowest instep, ankle and little deformed first toe. Type 2 (41.8%) was characterized by the shortest, even M-L ratio, thin ankle and heel, the highest instep and ankle. Type 3 (33.5%) showed the longest, inward M-L ratio, thick ankle and heel, and deformed first toe. As the cross-tabulation of foot length and ball circumference, 17.2 percent was not covered by KS standard; in addition, the foot length was longer than the KS standard. The correlation analysis of key dimensions showed that foot length and ball circumference were highly correlated with other items; therefore, regression equations were derived to estimate other foot measurements using these two items as independent variables.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.74-80
• /
• 2001

The nucleotide sequences of the internal transcribed spacer regions (ITS1 and ITS2) of ribosomal DNA (rDNA), and the 5.85 rRNA gene, have been determined for 13 strains of dinoflagellates in order to analyze the phylo-genetic relationship. The DNA sequences contained considerable variation in the ITS regions, but little in the 5.85 rDNA. In addition, the ITS1 was more variable than the ITS2 in all species examined. The nucleotide length of this region varied from 519 bp to 596 bp depending on the taxa. The investigated taxa were divided into three large groups based on the ITS length, i. e., a group with short ITS region (A. fraterculus and Alexandrium sp.), a with ITS region group (P. micans, P. minimum and P. triestinum) and a with ITS region group (G. impudicum, C. polykrikoides, G. sanguineum, G. catenatum and H. triquetra). The relationship between nucleotide length of ITS1 and that of ITS2 was negative, whereas G+C content and nucleotide length showed positive correlation. In phylogenetic analyses producing NJ trees, the topology was similar cluster and clearly divided the taxa into three groups based on 5.8S rDNA that were similar to those based on morphological characteristics. In particular, G. impudicum was more closely related to G. catenatum than to C. polykrikoides using phylogenetic analysis. From this study, we chew that the length of ITS region contributes to discriminate Korean harmful algal species and ITS analysis is a useful method for resolving the systematic relationships of dinoflagellates.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2013

The empirical correlations for the prediction of breakup length of liquid jet in uniform cross flow are reviewed and classified in this study. The breakup length of liquid jets in cross flow was normally discussed in terms of the distances from the nozzle exit to the column breakup location in the x and y directions, called as column fracture distance and column fracture height, respectively. The empirical correlations for the prediction of column fracture distance can be classified as constant form, momentum flux ratio form, Weber number form and other parameter form, respectively. In addition, the empirical correlations for the prediction of column fracture height can be grouped as momentum flux ratio form, Weber number form and other parameter form, respectively. It can be summarized that the breakup length of liquid jet in a cross flow is a basically function of the liquid to air momentum flux ratio. However, Weber number, liquid-to-air viscosity ratio and density ratio, Reynolds number or Ohnesorge number were incorporated in the empirical correlations depending on the investigators. It is clear that there exist the remarkable discrepancies of predicted values by the existing correlations even though many correlations have the same functional form. The possible reasons for discrepancies can be summarized as the different experimental conditions including jet operating condition and nozzle geometry, measurement and image processing techniques introduced in the experiment, difficulties in defining the breakup location etc. The evaluation of the existing empirical correlations for the prediction of breakup length of liquid jet in a uniform cross flow is required.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.84-90
• /
• 2000

Biodegradation of vanous medium-chain-length polyhydroxyalkanoates (MCL-PHAs) by an extracellular depolymerase system from Pseudomonas sp. RY-1 was investigated under laboratoly conditions. The degradation rate of the polymers was determined by quantitative clem zone technique, enzyme (turbidity) assay, and respirometry assay. Although the enzyme system secreted by Pscudomor~as sp. RY-1 was capable of degrading all MCL-PHAs tested. its secretion was influenced by the availability of secondary carbon sources. The rate of enzymatic degradation of MCL-PHAs was dependent upou the monomeric composition of the polyesters and reduced as the chain lengths of the monomer m t s in the polyesters increased. MCL-PHAs containing C-even monomer units showed faster degradation rate than MCL-PHAs containing C-odd monomer units. Respiration rates of MCL-PHAs with C-even monomer uuts were also much faster than those of MCL-PHAs with C-odd monomer units. The degmdation rate of MCL-PHAs bearing unsaturated substituents was faster than that of mcl-PHAs without functional substituents, which is suggesting the correlation between the degradation rate and the crystallinity of MCL-PHAs.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.30.1-30.6
• /
• 2018

Background: The purpose of the present study was to investigate the differences in the position and shape of the anterior loop of the inferior alveolar nerve (ALIAN) in relation to the growth pattern of the mandibular functional subunit. Methods: The study was conducted on 56 patients among those who had undergone orthognathic surgery at the Gangnam Severance Hospital between January 2010 and December 2015. Preoperative computerized tomography (CT) images were analyzed using the Simplant OMS software (ver.14.0 Materialise Medical, Leuven, Belgium). The anterior and inferior lengths of ALIAN (dAnt and dInf) and each length of the mandibular functional subunits were measured. The relationship between dAnt, dInf, and the growth pattern of the mandibular subunits was analyzed. Results: The length of the anterior portion of ALIAN (dAnt) reached 3.34 ± 1.59 mm in prognathism and 1.00 ± 0.97 mm in retrognathism. The length of the inferior portion of ALIAN (dInf) reached 6.81 ± 1.33 mm in prognathism and 5.56 ± 1.34 mm in retrognathism. The analysis of Pearson's correlation coefficiency on all samples showed that the lengths of functional subunits were positively correlated with the loop depth. The length of the symphysis area in prognathic patients was positively correlated with the anterior loop depth (p = 0.005). Conclusions: Both the anterior and inferior length of ALIAN are longer in prognathic patients. Especially, it seems to be associated with the growth of the symphysis area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1397-1406
• /
• 2008

This research was to develop Taekwondo trunk protector(Hogu) and head protector's sizing systems corresponding the regulations by World Taekwondo Association. These sizing systems were established using 2003-2004 Size Korea anthropometric data. The result can be summarized as follows: According to the analysis of correlation, most measurements had high relationship with weight for Hogu and head girth for head protector. Six sizes(47, 54, 59, 64, 70, 76) for Hogu and 4 sizes(52, 54, 56, 60) for head protector were suggested in this study. Hogu sizes indicate body weights and head protector sizes express head girth measurements. By the comparison between current Hogu sizes and new sizes, the smaller sizes of new Hogu were bigger than current sizes in bust girth, back fastening length, shoulder length. On the other hand, the bigger sizes of new Hogu were larger than current sizes in bust girth, back fastening length, shoulder length. In addition, new Hogu's lengths were shorter than current Hogu in all sizes. The lengths of Neck to collar bone in new Hogu sizes were longer than current Hogu. In case of the head protector, there were no measurements besides outer circumference of helmet in recognized specifications of WTF. Therefore some referable measurements such as head girth, head length, bitragion arc, sagital arc were suggested in new size specification. When helmet sizes were suggested, the thickness of the NBR foam also were considered.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.441-447
• /
• 2017

Objective : Computed tomography (CT)-based method of three dimensional (3D) analysis ($MIMICS^{(R)}$, Materialise, Leuven, Belgium) is reported as very useful software for evaluation of OPLL, but its reliability and reproducibility are obscure. This study was conducted to evaluate the accuracy of $MIMICS^{(R)}$ system, and inter- and intra-observer reliability in the measurement of OPLL. Methods : Three neurosurgeons independently analyzed the randomly selected 10 OPLL cases with medical image processing software ($MIMICS^{(R)}$) which create 3D model with Digital Imaging and Communication in Medicine (DICOM) data from CT images after brief explanation was given to examiners before the image construction steps. To assess the reliability of inter- and intra-examiner intraclass correlation coefficient (ICC), 3 examiners measured 4 parameters (volume, length, width, and length) in 10 cases 2 times with 1-week interval. Results : The inter-examiner ICCs among 3 examiners were 0.996 (95% confidence interval [CI], 0.987-0.999) for volume measurement, 0.973 (95% CI, 0.907-0.978) for thickness, 0.969 (95% CI, 0.895-0.993) for width, and 0.995 (95% CI, 0.983-0.999) for length. The intra-examiner ICCs were 0.994 (range, 0.991-0.996) for volume, 0.996 (range, 0.944-0.998) for length, 0.930 (range, 0.873-0.947) for width, and 0.987 (range, 0.985-0.995) for length. Conclusion : The medical image processing software ($MIMICS^{(R)}$) provided detailed quantification OPLL volume with minimal error of inter- and intra-observer reliability in the measurement of OPLL.