• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.532-536
• /
• 2005

Thermal shock resistance of structural ceramics is a property that is difficult to quantity, and as such is usually expressed in terms of a number of empirical resistance parameters. These are dependant on the conditions imposed, but one method that can be used is the examination of density, Young's modulus and thermal expansion retention after quenching. For high temperature applications, long-annealing thermal durability, cycle thermal stability and residual mechanical properties are very important if these materials are to be used between $1000^{\circ}C$ and $1300^{\circ}C$. In this study, an excellent thermal shock-resistant material based on $Al_2TiO_5-mullite$ composites of various compositions was fabricated by sintering reaction from the individual oxides and adjusting the composition of $Al_2O_3TiO_2/SiO_2$ ratios. The characterization of the damage induced by thermal shock was done by measuring the evolution of the Young's modulus using ultrasonic analysis, density and thermal expansion coefficients.

• 한국환경보건학회지
• /
• 제43권6호
• /
• pp.516-524
• /
• 2017

Objectives: The annual catch of the common squid Todarodes pacificus in Korean coastal waters has gradually increased since the late 1980s. We investigated the long-term effects of climate variability on the variation in catches of the squid in the offshore fisheries of Korea. Methods: Moving average method, correlation analysis, and regression analysis were used to determine the relationship between the environmental factors and fluctuation in the catch of the squid during the past 30 years (1981- 2010). A ten-year moving average was calculated and used for each variable. Results: Squid catches in Korean coastal waters increased over time, and there were significant variations within every ten years (p < 0.001). Air temperature, atmospheric pressure, and wind grade among the meteorological factors, alongside sea surface temperature (SST) and concentrations of phosphate phosphorous, and nitrite/nitrate nitrogen in the sea water increased and were positively related with the catch size of squid (p < 0.001). However, salinity decreased and was negatively related with the catch size (p < 0.001). The increase in air temperature and SST was almost parallel, although there was a time lag between the two factors. Conclusion: These results suggest that there is a causal association between climate change and squid populations. Climate change, especially ocean warming, appears to have been largely favorable for squid range expansion into Korean seas. Although the expansion may be helpful for the human food supply, the safety of the squid caught should be monitored since the concentrations of phosphorous and nitrogen in the sea water increased, which indicates that Korean seas have grown gradually more polluted.

• Korean Journal of Radiology
• /
• 제1권2호
• /
• pp.91-97
• /
• 2000

Objective: To determine whether the time-intensity curves acquired by test and main dose contrast injections for MR angiography are similar. Materials and Methods: In 11 patients, repeated contrast-enhanced 2D-turbo-FLASH scans with 1-sec interval were obtained. Both test and main dose timeintensity curves were acquired from the abdominal aorta, and the parameters of time-intensity curves for the test and main boluses were compared. The parameters used were arterial and venous enhancement times, arterial peak enhancement time, arteriovenous circulation time, enhancement duration and enhancement expansion ratio. Results: Between the main and test boluses, arterial and venous enhancement times and arteriovenous circulation time showed statistically significant correlation (p < 0.01), with correlation coefficients of 0.95, 0.92 and 0.98 respectively. Although the enhancement duration was definitely greater than infusion time, reasonable measurement of the end enhancement point in the main bolus was impossible. Conclusion: Only arterial and venous enhancement times and arteriovenous circulation time of the main bolus could be predicted from the test-bolus results. The use of these reliable parameters would lead to improvements in the scan timing method for MR angiography.

• 전기화학회지
• /
• 제18권2호
• /
• pp.68-74
• /
• 2015

본 실험에서는 리튬이차전지의 고용량 음극활물질로 주목받는 Si 합금의 부피팽창을 억제하기 위한 방법의 하나인 비활성-matrix상을 이용하고, 상태도를 이용하여 동일한 용량을 발현하는 Si계 이원계 합금 (Cr-Si, Ni-Si) 조성에서의 미세구조 및 전기화학적 특성을 비교/분석하였다. 급속응고공정(Rapid Solidification Process, Melt-spinning법)를 이용하여 동일조건하에서 리본 모양의 합금을 제작하였고, 제작된 리본합금은 동일조건에서 분쇄하여 X-선회절 (X-Ray Diffraction) 분석을 실시하였다. XRD 분석 결과, 상태도에서 예측된 것과 같이, 두 합금 모두 Si 상 및 비활성-matrix상($CrSi_2$ 및 $NiSi_2$)이 관찰되었으며, 이외의 제3의 상은 관찰되지 않았다. 또한, 주사전자현미경(SEM, Scanning Electron Microscope) 및 투과전자현미경-에너지분산분광법(TEM-EDS, Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy)으로 미세구조를 살펴본 결과 Cr-Si 합금의 미세구조가 Ni-Si 합금보다 fine한 것을 알 수 있었고 이것은 상태도로부터 예측 가능하였다. 두 합금 조성에서 미세구조에 따른 전기화학적 특성을 비교 평가하기 위해 코인형 하프셀과 풀셀로 충방전 실험을 진행하였고 이와 별도로, 전극의 두께변화 측정이 가능하게 설계된 시험셀을 이용하여 반응 중 Si의 수축팽창을 측정하였다. coarse한 미세구조를 가진 Ni-Si 합금보다 fine한 미세구조를 갖는 Cr-Si 합금의 전극팽창이 비교적 잘 억제됨을 확인하였고, 충방전에 따른 수명 내구성도 우수함을 확인하였다. 이런 결과들로부터 합금의 조성에 따른 미세구조, 체적변화 및 전기화학적 열화와의 연관성을 유추할 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제32권4호
• /
• pp.242-251
• /
• 2020

본 연구에서는 직립 안벽 앞에 설치된 2차원 진동수주형 파력발전장치의 추출효율과 반사율을 규칙파와 불규칙파에 대하여 살펴보고 둘 사이의 상관관계를 조사하였다. 해석이론으로 선형포텐셜 이론에 기반을 둔 고유함수전개법을 사용하였다. 공기실이 완전 개방되었을 때 입사파에 의한 산란문제와 공기실이 닫혀 있을 때 공기실내의 변동압력에 의한 파의 방사문제를 풀어 공기실 내부의 유량을 구하고, 이를 공기실내의 공기 흐름에 대한 연속방정식에 대입하여 변동압력을 구한다. 추출파워가 최대가 되는 최적 터빈계수를 적용하여 진동수주형 파력발전장치의 최대 추출효율과 반사율을 규칙파와 불규칙파에 대하여 구하였다. 파랑에너지를 효율적으로 흡수하도록 설계된 진동수주형 파력발전장치는 동시에 반사파를 줄이는데 기여하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1069-1074
• /
• 2003

A theoretical description and experimental demonstration of homodyne-detected two-color transient grating (2-C TG) signal are presented. By treating the coupled bath degrees of freedom as a collection of harmonic oscillators and using a short-time expansion method, approximated nonlinear response functions were obtained. An analytic expression for the two-color transient grating signal was obtained by carrying out relevant Gaussian integrals. The initial rising and decaying parts of the 2-C TG signal is shown to be critically dependent on the ultrafast inertial component of the solvation correlation function. The experimental results confirm the predictions of the theoretical model.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.208-217
• /
• 1990

A rectangular test section is devised by assuming two dimensional melting of a solid phase change material heated from two sides which are maintained at constant temperature and allowing a free expansion due to density difference between solid and liquid. The timewise melting shape is recorded photographically by the shadow graph method for several experimental conditions. The analysis shows that the melting process consists of four regimes. At first, the pure conduction heat transfer is dominant, and as time goes by natural convection grows and plays a role greatly. Experiments are carried out varying not only the wall temperature but height of the wall. Each effect of them on the melting process is obtained in the form of combination of dimensionless parameters, $Ste^{0.8}\;FoRa^{0.2}$. An algebraic correlation is suggested, which predicts the melted fraction well.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.483-484
• /
• 2006

This paper introduces an improved surface matching algorithm that can be used to reconstruct the surface topography of an object that is scanned from multiple overlapping regions by an AFM. The essence of the image matching technique is stitching two neighboring images intentionally overlapped with each other. To enhance the computational efficiency, this paper introduces a pyramid matching algorithm which makes use of reduced images for primary images. The results show that the proposed image pyramid matching algorithm is useful fer enhancing the computational efficiency.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권4호
• /
• pp.25-45
• /
• 2022

Purpose In this paper, we propose the method to extend topic modeling techniques in order to derive data-based research hypotheses when establishing research hypotheses for social sciences, As a concept in contrast to the existing deductive hypothesis establishment methodology for the social science research, the topic modeling technique was expanded to enable the so-called inductive hypothesis establishment methodology, and an analysis case of the Seongsan Ilchulbong online review based on the proposed methodology was presented. Design/methodology/approach In this paper, an extension architecture and extension algorithm in the form of extending the existing topic modeling were proposed. The extended architecture and algorithm include data processing method based on topic ratio in document, correlation analysis and regression analysis of processed data for topics derived by existing topic modeling. In addition, in this paper, an analysis case of the online review of Seongsan Ilchulbong Peak was presented by applying the extended topic modeling algorithm. An exploratory analysis was performed on the Seongsan Ilchulbong online reviews through the basic text analysis. The data was transformed into 5-point scale to enable correlation and regression analysis based on the topic ratio in each online review. A regression analysis was performed using the derived topics as the independent variable and the review rating as the dependent variable, and hypotheses could be derived based on this, which enable the so-called inductive hypothesis establishment. Findings This paper is meaningful in that it confirmed the possibility of deriving a causal model and setting an inductive hypothesis through an extended analysis of topic modeling.

• 한국유체기계학회 논문집
• /
• 제7권3호
• /
• pp.32-38
• /
• 2004

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard $k-{epsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.