• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.115-123
• /
• 2019

An analytical method was developed for the determination of fenpropimorph, a morpholine fungicide, in hulled rice, potato, soybean, mandarin and green pepper using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) sample preparation and LC-MS/MS (liquid chromatography-tandem mass spectrometry). The QuEChERS extraction was performed with acetonitrile followed by addition of anhydrous magnesium sulfate and sodium chloride. After centrifugation, d-SPE (dispersive solid phase extraction) cleanup was conducted using anhydrous magnesium sulfate, primary secondary amine sorbents and graphitized carbon black. The matrix-matched calibration curves were constructed using seven concentration levels, from 0.0025 to 0.25 mg/kg, and their correlation coefficient ($R^2$) of five agricultural products were higher than 0.9899. The limits of detection (LOD) and quantification (LOQ) were 0.001 and 0.0025 mg/kg, respectively, and the limits of quantification for the analytical method were 0.01 mg/kg. Average recoveries spiked at three levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) and were in the range of 90.9~110.5% with associated relative standard deviation values less than 5.7%. As a result of the inter-laboratory validation, the average recoveries between the two laboratories were 88.6~101.4% and the coefficient of variation was also below 15%. All optimized results were satisfied the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. This study could serve as a reference for safety management relative to fenpropimorph residues in imported and domestic agricultural products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.552-560
• /
• 2018

Since 1960's, the large conglomerates of South Korea have grown due to the corporate-centered, fast-paced growth drive, while the small and medium-sized businesses supported the country's economy as the subordinate structure of these conglomerates. Due to the globalization of the business environments, the focus of competition shifted from competitions between individual companies to one between networks of companies. Therefore, more emphasis is now put on the capabilities of the cooperation networks between companies rather than the capabilities of individual companies. Therefore, in this study, the author examined the influence of the win-win growth strategy elements through cooperation with small and medium-sized businesses upon corporate performance. This study was conducted with the workers of small and medium-sized businesses that have previous cooperation experiences with South Korean conglomerates over the period from March 2 to May 17, 2018. For this, a total of 515 questionnaires were retrieves to obtain the data for analysis. The analysis was conducted using SPSS 22.0 and AMOS 18.0. The analytical processes that were taken included exploratory factor analysis, confirmatory factor analysis, confidence analysis, correlation analysis, and structural equation analysis model. The results of the analysis showed that, first of all, the win-win growth strategy factors that affected the strategic performance, which is a part of cooperate performance were, respectively, harmonization with the goals, production technical support, and quality system. Second, the win-win growth strategy factors that affected the financial performance, which is a part of corporate performance, turned out to be harmonization with the goals, quality system, and incentive. With the results of this study, it was shown that the elements such as harmonization with the goals, production technical support, quality systems, and incentives were key infrastructural factors that affected the corporate performance directly. On the other hand, its implication is that informative or knowledge-related factors, such as joint knowledge creation, do not have their own added values, while they are not too much likely to affect corporate performances for the moment.

• Korean Journal of Medical Ethics
• /
• v.21 no.4
• /
• pp.360-376
• /
• 2018

Nursing students experience ethical conflicts that lead to moral distress and moral sensitivity in clinical practice. Most nursing students have some difficulty in speaking up when faced with morally challenging situations. Hence, increasing moral courage of these students is important to improve the quality of practice, and carry out nursing responsibilities. However, research on the moral distress, moral sensitivity, and moral courage of nursing students has not been reported in South Korea. The purposes of this study were to (a) identify the levels of moral distress, moral sensitivity, and moral courage of nursing students and (b) examine the influence of moral distress and moral sensitivity on moral courage. Data were collected through a survey using self-reported questionnaires sent to senior nursing students at two nursing colleges in Seoul and Gyeonggido. A total of 138 senior nursing students participated in the survey. The data were analyzed using the IBM SPSS Statistics 23 program by Pearson's correlation coefficients and multiple regression analysis. The mean scores of the moral distress thermometer, moral distress, moral sensitivity, and moral courage were $3.53{\pm}2.18$, $57.33{\pm}43.35$, $134.98{\pm}13.98$, and $56.33{\pm}12.75$, respectively. The significant factors influencing moral courage were the moral distress thermometer and patient-centered nursing, which was a subcomponent of moral sensitivity. The explanatory power of the model was 5%. This study confirms that nursing students, like nurses, experience moral distress. It is therefore important to create organizational environments that support the moral courage of nursing students.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.584-595
• /
• 2021

In this study, the correlation between operating stages of waste air-treating system composed of two alternatively-operating UV/photocatalytic reactors, and the deactivation of photocatalyst used in each operating stage, was investigated by instrumental analysis thereon. The repeated deactivation and subsequent re-generation of photocatalyst used in the waste air treating system of previous investigation performed by Lee and Lim (Korean Chem. Eng. Research, 59(4), 574-583(2021)), were characterized on virgin photocatalyst-carrying porous SiO₂ media (A4), used photocatalyst-carrying porous SiO₂ media (A1, A2 and A3) collected from the corresponding photocatalytic reactor upon 1^st, 2^nd, and 3^rd run, respectively, regenerated photocatalyst-carrying porous SiO₂ media upon 1 time-run (AD1) and 3 times regenerated photocatalyst-carrying porous SiO₂ media upon 3 time-runs (AD3) by instrumental analysis including BET analysis, SEM, XPS, SEM-EDS and FT-IR. As a result, the proper regeneration-temperature for deactivated photocatalyst to be regenerated several times (more than 3 times), was suggested below 200 ℃. Such temperature of deactivated photocatalyst-regeneration was almost consistent to the one, according to BET analysis, at which tiny nano-pores blocked by adsorbed ethanol-oxidative and degraded intermediates (AEODI), were regenerated to be reopened through almost complete mineralization of AEODI. In particular, the results of XPS analysis indicated an incurrence of insignificant deactivation of photocatalysis upon 1^st run of UV/photocatalytic reactor (A or C) of the previous investigation. In addition, the results of XPS analysis were consistent with the experimental results of the previous investigation in that 1) deactivation of photocatalyst incurred during 2^nd run of the UV/photocatalytic reactor (A or C) resulted in decreased removal efficiency, by ca. 5% and 5%, of ethanol and hydrogen sulfide, respectively, compared with its 1^st run; 2) there was insignificant difference between the removal efficiencies of its 2^nd run and 3^rd run. Furthermore, the removal efficiencies of ethanol and hydrogen sulfide for hypothetical 4^th run of photocatalytic reactor in the previous investigation, using AD3, were expected to decrease, compared with its 3^rd run, by much more than those for 2^nd run in the previous investigation did, compared with its 1^st run.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.107-127
• /
• 2021

The purpose of this study is to examine the relationship between the content areas and competencies of the Family & Consumer Sciences National Standards(NSFCS 3.0) of the U. S. and UNESCO Global Citizenship Education(GCED). For this purpose, the global perspective, content areas and competencies in NSFCS 3.0 and the keywords related to the three areas of content areas of UNESCO GCED were analyzed. Specifically, the content standards and competencies related to the words 'world' or 'global' were extracted and their relationship to the GCED topics and keywords were analyzed. The results of the study are as follows. First, NSFCS 3.0 described the direct correlation between individuals and the world by recognizing individuals as global citizens in 14 areas except for 'interpersonal relations' and 'parenting', specifically using the keyword of 'world' in content standards and competencies. Second, in the content standards and competencies of NSFCS 3.0, the keywords related to the topics of GCED areas were presented evenly in the three areas of FCS, dietary habits, family life, and human development. The social and emotional areas were not presented in clothing, housing, and consumer life. On the other hand, the behavioral area, which is emphasized most in the GCED, is presented in all the FCS content areas. From this, it is apparent that the learning field for GCED may be considered as the area of life pursued by the home economics curriculum. The results of this study provide foundational bases for understanding the relationship between NSFCS 3.0 and the GCED, and implications as to how to implement the content of the GCED in the next revision of the national home economics curriculum of Korea.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.119-133
• /
• 2019

This study is as skyscrapers are becoming increasingly taller, more constructors have decided the height alone cannot be a sufficient differentiator. As a result, atypical architecture is emerging as a new competitive factor. Also, it can be used for symbolizing the economic competitiveness of a country, city, or business through its form. Before the introduction of digital media, there was a discrepancy between the structure and form of a building and correcting this discrepancy required a separate structural medium. Since the late 1980s, however, digitally-based atypical form development began to be used experimentally, and, until the 2000s, it was used mostly for super-tall skyscrapers for offices or for industrial chimneys and communication towers. Since the 2000s, many global brand hotels and commercial and residential buildings have been built as super-tall skyscrapers, which shows the recent trend in architecture that is moving beyond the traditional limits. Complex atypical structure is formed and the formative characteristics of diagonal lines and curved surfaces, which are characteristics of atypical architecture, are created digitally. Therefore, it's goal is necessary to identify a new relationship between the structure and forms. According to the data of Council on Tall Buildings and Urban Habitat (CTBUH), 100-story and taller buildings were classified into typical, diagonal, curved, and segment types in order to define formative shapes of super-tall skyscrapers and provide a ground of the design process related to the initial formation of the concept. The purpose of this study was to identify the correlation between different forms for building atypical architectural shapes that are complex and diverse. The study results are presented as follows: Firstly, complex function follows convergence form characteristics. Secondly, fold has inside of architecture with repeat. Thirdly, as curve style which has pure twist, helix twist, and spiral twist. The findings in this study can be used as basic data for classifying and predicting trends of the future super-tall skyscrapers.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.299-308
• /
• 2021

Fe(II) released from mining activities is precipitated as various Fe(III)-oxyhydroxides when exposed to an oxidizing environment including mine drainage. Ferrihydrite, one of the representative precipitated Fe(III) minerals, is easy to adsorb heavy metals and other pollutants due to the large specific surface area caused by very low crystallinity. Ferrihydrite is transformed to thermodynamically more stable goethite in the natural environment. Hence, information on the transformation of ferrihydrite to goethite and the related mobility of heavy metals in the acid mine drainage is important to predict the behaviors of those elements during ferrihydrite to goethite transition. The behaviors of heavy metals during the transformation of ferrihydrite to goethite were investigated for core samples collected from an AMD treatment system in the Heungjin-Taemaek coal mine by using X-ray diffraction (XRD), chemical analysis, and statistical analysis. XRD results showed that ferrihydrite gradually transformed to goethite from the top to the bottom of the core samples. Chemical analysis showed that the relative concentration of As was significantly high in the core samples compared with that in the drainage, indicating that As was likely to be adsorbed strongly on or coprecipitated with iron oxyhydroxide. Correlation analysis also indicated that As can be easily removed from mine drainage during iron mineral precipitation due to its high affinity to Fe. The concentration ratio of As, Cd, Co, Ni, and Zn to Fe generally decreased with depth in the core samples, suggesting that mineral transformation can increase those concentrations in the drainage. In contrast, the concentration ratio of Cr to Fe increased with depth, which can be explained by the chemical bond of iron oxide and chromate, and surface charge of ferrihydrite and goethite.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.120-129
• /
• 2021

Securing a range of wheat resources is of particular importance with respect to wheat breeding, as it provides a broad genetic foundation. Although wheat breeders have used different wheat germplasms as material resources in current breeding systems, the traits of most germplasms collected from foreign countries differ from the unique traits that have evolved in the Korean environment. In this study, conducted over a 2-year period (2018 and 2019), we therefore evaluated the agricultural traits 1,967 wheat germplasms collected not only in Korea but also worldwide. During the period from sowing to February, the average temperature in 2019 was greater than 1℃, whereas from March to June, the average temperature was approximately 0.9℃ higher in 2018. Compared with the growth recorded in 2018, the stem length in 2019 increased by approximately 20 cm in 2019, and there were notable differences heading date and maturation between 2018 and 2019. In 2019, the heading dates of 973 and 713 wheat resources were earlier and later than those in 2018, respectively. Moreover, stem length was found to be highly correlated with the heading date and maturation. In Korea, where the rainy season and tine of rice transplantation overlap with the time of wheat harvest, early flowering time with high grain yield has been the most important selection target with respect to wheat breeding. We anticipate that the findings of this study will provide would use a foundation for the selection of elite materials and the development of resource core-sets for Korean wheat breeding programs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.4
• /
• pp.258-267
• /
• 2020

The agrivoltaic can produce electricity and grow crops on fields at the same time. It is necessary to analyze the cultivation environment and evaluate the crop productivity under agrivoltaic because the shading point changes according to structure of agrivoltaic and sun's position. Two types of "fixing" and "tracing" agrivoltaic were installed, and a rice cultivation experiment was conducted in the fields under each agrivoltaic and without shading (control). "Hyunpoombyeo" was transplanted on June 7, 2019, and grown with fertilization of 9.0-4.5-5.7 kg/10a (N-P-K). Fifteen weather stations were installed under each agrivoltaic to measure solar radiation and temperature, and yield and yield-related elements were investigated by points. The accumulated solar radiation during the rice growing season in fixing was no much difference between points, and that in tracing was much difference between points. However, the average solar radiations of two agrivoltaics were similar. The mean temperature, yield, and yield-related elements showed a significant difference for the shading rate, and decreased with increasing the shading rate except ripening grain rate and 1000 grain weight of fixing agrivoltaic. In the relationship between shading rate and yield, fixing and tracing were fitted to a logistic equation and a simple linear equation, respectively, and showed a high correlation (tracing: R2 = 0.62, fixing: R2 = 0.73). The shading rate variation by point for two types was large despite similar yield variation. Thus, it needs to be more closely examined the relationship of the shading rate for a specific period rather than the shading rate during the whole growing season.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.2
• /
• pp.161-167
• /
• 2020

Objectives : Although the seasonality of suicide is a well-known phenomenon, little is reported about the seasonality of non-suicidal self-injury. The purpose of this study was to identify the seasonality of wristcutting behavior and to examine its relationship with meteorological factors. Methods : To identify the presence of seasonality, we investigated whether there was a difference in the average number of visits per month to an emergency room (ER) of an urban hospital for 226 patients with wrist-cutting behavior enrolled between December 2014 and May 2019. To ascertain significant meteorological factors, we used the multiple Poisson regression using generalized additive model with time, monthly temperature, monthly sunshine hour, and atmospheric pressure in the prior month as explanatory variables. Results : In males, the average number of monthly visits to the ER for wrist cutting behavior differed by month and was the highest in September (male : p=0.048, female : p=0.21, total : p=0.28). As a result of multiple regression analysis, the average number of patients admitted to the ER for wrist cutting behavior was related to the interaction between atmospheric pressure in the prior month and temperature in males (p=0.010), and showed a positive correlation with sunlight in females [p=0.044, β=4.70×10-3, 95% CI=(1.19×10-4, 9.27×10-3)]. Conclusions : Wrist cutting behavior shows seasonality in male, which is associated with changes in meteorological variables.