• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.665-676
• /
• 2018

In this study, a four-node quadrilateral partial mixed plate element with low degrees of freedom (dofs) is developed for static and free vibration analysis of functionally graded material (FGM) plates rested on Winkler-Pasternak elastic foundations. The formulation of the presented finite element model is based on a parametrized mixed variational principle which is developed recently by the first author. The presented finite element model considers the effects of shear deformations and normal flexibility of the FGM plates without using any shear correction factor. It also fulfills the boundary conditions of the transverse shear and normal stresses on the top and bottom surfaces of the plate. Beside these capabilities, the number of unknown field variables of the plate is only six. The presented partial mixed finite element model has been validated through comparison with the results of the three-dimensional (3D) theory of elasticity and the results obtained from the classical and high-order plate theories available in the open literature.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.715-718
• /
• 1998

본 논문에서는 시분할 구조와 1.5bit 디지털 에러보상을 사용하여 작은 면적을 갖는 저 전압, 저전력 10bit 1㎒ 사이클릭 A/D 변환기를 제안하였다. 제안된 사이클릭 A/D 변환기는 시분할 구조를 사용함으로서 변환속도의 향상과 저 전력 특성을 가질 수 있었으며 1.5bit 디지털 에러 보상을 사용함으로서 10bit의 고해상도와 저 전력 특성을 구현할 수 있었다. 제안된 사이클릭 A/D 변환기는 0.6㎛ CMOS Nwell 공정 parameter로 simulation 하였으며 layout 결과 칩면적은 1.1㎜×0.8㎜ 이며 이는 비슷한 성능을 갖는 다른 A/D 변환기에 비하여 매우 작은 크기이다. 제안된 사이클릭 A/D 변환기는 3V의 전원전압에 1.6㎽의 전력소모를 갖는다. Matlab simulation 결과 INL, DNL은 각각 0.6LSB, 0.7LSB 이하의 값을 보였다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.166-168
• /
• 1996

Since interior permanent magnet synchronous motor(IPMSM) has a structure whose magnet is inserted in the rotor, d, q inductances are differ from each other and the motor produces hybrid torque combined allignment term and reluctance term. But, for their complex magnetic path, it is difficult to analyze this type motors by equivalent magnetic circuit method. So, in this paper, the variation of parameters of IPMSM according to the magnet thickness accuired by using the result from finite element method is presented for the sake of effective design process.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2007

A rolling speed dependent spread model is proposed for predicting the exit cross sectional shape in oval-round (or round-oval) pass rod rolling process when the rolling speed is very high. The effect of rolling speed on the exit cross sectional shape is measured by performing a four-pass continuous high speed (${\sim}80m/s$) rod rolling test and is described in terms of the spread correction parameter. The validity of the model is examined by applying it to rod rolling process at POSCO No.3 Rod Mill. The cross sectional shapes of workpiece predicted by the proposed model coupled with the surface profile prediction $method^{6}$ are in good agreement with those obtained experimentally.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.850-851
• /
• 2011

본 논문은 SRM의 센서리스 속도제어를 위한 슬라이딩 모드 자속관측기법을 적용하고, 초기기동에서 센서리스 영역까지의 천이구간에서는 동일한 센서리스 추정방식과 계산된 자속의 오차 성분으로 오픈루프 상태에서 속도리플을 억제할 수 있는 방식과 전동기의 온도 및 파라미터 변화에 의한 자속 오차 성분으로 인해 발생하는 위치 추정오차를 보상하기 위한 새로운 추정위치 보상기를 제안한다. 제안된 추정위치 보상기는 SRM의 자기적인 특성에 의해 발생하는 인덕턴스 변곡점 위치를 실제 위치로 가정하여 추정된 센서리스 위치를 순시적으로 보상하는 방식이다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.117-124
• /
• 2007

In order to operate CD and DVD compatibly in a pickup system, the objective lens comprise diffractive optical element(DOE) zone and aspheric curvature on its lens surface. The DOE objective lens is effective to simplify this dual-purpose pickup system of the 655nm and 785nm wavelength by using only one lens, but requires more precision manufacturing process and system due to the complicated shape. This paper presents the overall manufacturing process of this objective lens and describes main parameters in each process, for the correction of the aspheric surface in its core, the shrinkage compensation after injection molding, and the uniformity compensation by adjusting molding conditions.

• New & Renewable Energy
• /
• v.6 no.2
• /
• pp.5-11
• /
• 2010

This paper reviews three commercial softwares for wind climate data analysis in wind resource assessment; WAsP/Observed Wind Climate, WindRose and Windographer. Windographer is evaluated as the best software because of its variety of input data format, analysis functions, easiness of user interface, etc. For a quantitative understanding of uncertainty depending on software selection, a benchmark is carried out with the met-mast observation dataset at the Gimnyeong Wind Turbine Performance Test Site. It is found that Weibull parameter calculation and air density correction have a dependency on the software so that such uncertainty should be considered when an analysis software is selected. It is confirmed that annual energy production calculated by WAsP using a statistical table of frequency of occurrence may have some error compared to a time-series calculation method used by the other softwares.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.1
• /
• pp.36-43
• /
• 2015

Since the crack generation and its propagation caused by welding defects is one of the main hull damage patterns, the simulation of crack propagation process has an important significance for ship safety. Based on interface element method, a finite element model to simulate crack propagation is studied in the paper. A Lennard-Jones type potential function is employed to define potential energy of the interface element. Tensile tests of steel flat plates with initial central crack are carried out. Surface energy density and spring critical stress that are suitable for the simulation of crack propagation are determined by comparing numerical calculation and tests results. Based on a large number of simulation results, the curve of simulation correction parameter plotted against the crack length is calculated.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.106-110
• /
• 2005

In this paper, LED traffic signal lamp's operating circuit using Flyback converter and PFC IC has been presented. Most power conversion circuits use PFC IC for Power Factor Correction. The design parameter's value of Flyback converter has been proposed and the error amplifier which regulates the output voltage has been designed Besides, the under voltage protection circuit and the over voltage protection circuit for protecting the operating circuit kin unbalance of common electric power source and the temperature compensation circuit for fixed optical output power have been proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3039-3045
• /
• 1994

The k-$\varepsilon$ turbulence models by Launder et al.(1977, LPS) and Leschziner and Rodi(1981, LR) are modified to account for the secondary straining effect with having a generality in the present paper. The modified models are obtained by replacing the gradient Richardson number used to account for the secondary straining effect in the original models by a new parameter with a tensor-invariant correction form. These two modified models are used to predict the turbulent flow over a backward-facing step. In contrast to both standard and modified LR models, the modified LPS model is found to predict the reattachment point fairy well, as well as mean velocity, wall static pressure, turbulent kinetic energy and Reynolds shear stress in the recirculating region.