• 제목/요약/키워드: correction formula

검색결과 140건 처리시간 0.03초

FRP Bar 콘크리트 보의 휨보강근비 변화에 따른 콘크리트 전단강도 (Concrete Shear Strength of FRP Bar Reinforced Concrete BeamAccording to Variation of Flexural Reinforcement Ratio)

  • 노경배;진치섭;장희석;김희성;황금식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권2호
    • /
    • pp.76-82
    • /
    • 2006
  • 휨철근 대체재로 FRP Bar를 사용한 콘크리트 보에 대하여 휨보강근비의 변화에 따른 콘크리트의 전단강도를 일련의 콘크리트 보 실험을 통하여 조사하였다. 실험 결과, 콘크리트의 전단강도는 RC보의 경우보다는 낮은 값으로 나타났지만, 휨보강근비가 증가함에 따라 전단강도도 증가하는 것으로 분석되었다. 문헌에 제안된 식과 실험결과의 회귀분석을 이용하여 FRP Bar의 종류 및 휨보강근비를 고려한 전단강도보정계수를 제안하였다.

"온병조변"에서 "임증지남의안" 의 온병관련 의안을 변형하고 첨삭한 방법 (Quotations from the ${\ulcorner}$Linzheng zhinan yian${\lrcorner}$ in the ${\ulcorner}$Wenbing tiaobian${\lrcorner}$: How were they transformed and corrected?)

  • 김한성;임진석;이충열
    • 동의생리병리학회지
    • /
    • 제19권4호
    • /
    • pp.865-871
    • /
    • 2005
  • The Wenbing tiaobian(온병조변) is the first systematic disease monograph on warm factor disease(온병), written by Wu Jutong(오국통). It was most influenced by the Linzheng zhinan yian(임증지남의안), which was a book of gathering medical case records of Ye tianshi(엽천사). Therefore, there are plenty of quotations from this book in the Wenbing tiaobian. This study investigates the quotations from Linzheng zhinan yian, especially focusing on the way of transformation and correction of the original medical case records on the warm factor disease. The results are as follows: About 104 of 265 provisions in the Wenbing tiaobian were directly quoted from the Linzheng zhinan yian. The provisions quoted from Ye's case records were rearranged according to the categories of the triple burners pattern differentiation(삼초변증) and the causes of warm factor disease. And eve case record was transformed into more general descriptive form in order to put it into the book. For example, the specific figures, and some patients' peculiar symptoms, causes, sex and disease names were omitted. On the other hand, the tongue moss, pulse shape and some symptoms, which were necessary for differentiating patterns, were added. In the case of the formula, some formulas originated from Ye's case records were named newly. And the dose of each herb consisting a formula was determined, and therapeutic principle, taking method and detailed explanation was added to every formula.

화강석 건조물의 표면 거칠기별 초음파속도법에 의한 강도 추정 (Granite Strength Estimation of Construction Considering Surface Roughness Effect on Ultrasonic Velocity Method)

  • 김정섭;신용석;김정훈
    • 한국건축시공학회지
    • /
    • 제10권1호
    • /
    • pp.137-145
    • /
    • 2010
  • 석조 건조물의 역학적 성질은 일반적으로 석재 강도의 관점에서 설명된다. 강도를 측정하기 위해서 문화재의 훼손이 없는 초음파속도의 측정 방법이 이용되고 있다. 현재 시행되고 있는 초음파속도법은 표면거칠기, 석재 두께 등에 대한 보정을 실시하지 않고 있는 실정이다. 그리고 그리스와 같은 접촉재 사용으로 문화재의 표면에 오염이 발생할 수 있다. 따라서 본 연구에서는 석조 건조물의 강도를 간접법으로 추정하기 위하여 석재 표면거칠기, 석재두께, 접촉재의 종류, 초음파속도 측정방법 등을 주변수로 석재 간접법 강도 추정식을 제안한다. (1) 잔다듬 석재 초음파속도법에 의한 강도 추정식 : $f_{su}=19.1{\times}V_p+18.3(R^2=76.0)$ (2) 거친다듬 석재 초음파속도법에 의한 강도 추정식 : $f_{su}=7.9{\times}V_p+64.6(R^2=69.8)$.

태양광시스템 모델식과 기계학습을 이용한 발전성능 추정 (Estimation of Power Using PV System Model Formula and Machine Learning)

  • 오현규;신우균;주영철;배수현;황혜미;강기환;고석환;장효식
    • Current Photovoltaic Research
    • /
    • 제11권1호
    • /
    • pp.27-33
    • /
    • 2023
  • In this paper, a machine learning model by using a regression algorithm is proposed to estimate the power generation performance of the BIPV system. The physical model formula for estimating the generation performance and the proposed model were compared and analyzed. For the physical model formula, simple efficiency model, temperature correction model, and regressive physics model for changing an irradiance were used. As a result, when comparing the regressive physics model for changing an irradiance and the proposed model with the actual generation measured data, the respective RMSE values are 0.1497 kW, 0.0451 kW and the accuracy values are 86.44%, and 96.56%. Therefore, the proposed model implemented in this experiment can be useful in estimating power generation.

급성 중독환자에서 삼투압 계산식으로 추정된 에탄올 농도의 유효성 검증 (Discrepancies and Validation of Ethanol Level Determination with Osmolar Gap Formula in Patients with Suspected Acute Poisoning)

  • 정해원;이미진;조재완;안재윤;김창호
    • 대한임상독성학회지
    • /
    • 제17권2호
    • /
    • pp.47-57
    • /
    • 2019
  • Purpose: Osmolar gap (OG) has been used for decades to screen for toxic alcohol levels. However, its reliability may vary due to several reasons. We validated the estimated ethanol concentration formula for patients with suspected poisoning and who visited the emergency department. We examined discrepancies in the ethanol level and patient characteristics by applying this formula when it was used to screen for intoxication due to toxic levels of alcohol. Methods: We retrospectively reviewed 153 emergency department cases to determine the measured levels of toxic ethanol ingestion and we calculated alcohol ingestion using a formula based on serum osmolality. Those patients who were subjected to simultaneous measurements of osmolality, sodium, urea, glucose, and ethanol were included in this study. Patients with exposure to other toxic alcohols (methanol, ethylene glycol, or isopropanol) or poisons that affect osmolality were excluded. OG (the measured-calculated serum osmolality) was used to determine the calculated ethanol concentration. Results: Among the 153 included cases, 114 had normal OGs (OG≤14 mOsm/kg), and 39 cases had elevated OGs (OG>14). The mean difference between the measured and estimated (calculated ethanol using OG) ethanol concentration was -9.8 mg/dL. The 95% limits of agreement were -121.1 and 101.5 mg/dL, and the correlation coefficient R was 0.7037. For the four subgroups stratified by comorbidities and poisoning, the correlation coefficients R were 0.692, 0.588, 0.835, and 0.412, respectively, and the mean differences in measurement between the measured and calculated ethanol levels were -2.4 mg/dL, -48.8 mg/dL, 9.4 mg/dL, and -4.7 mg/dL, respectively. The equation plots had wide limits of agreement. Conclusion: We found that there were some discrepancies between OGs and the calculated ethanol concentrations. Addition of a correction factor for unmeasured osmoles to the equation of the calculated serum osmolality would help mitigate these discrepancies.

피뢰기 열화진단에 있어 전원 고조파의 영향과 보정에 관한 연구 (A Study on the Influence of Harmonics in Power System Voltage on Arrester Diagnostics and its Compensation)

  • 김일권;송재용;한주섭;길경석;류길수;조한구
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권11호
    • /
    • pp.493-497
    • /
    • 2005
  • This paper dealt with the influence of harmonic voltages on arrester diagnostics and its compensation method by using a designed Pspice arrester model. A pure sinusoidal voltage and its 3$^{rd}$ harmonic voltage were applied to the model, and the leakage current components were analyzed. The simulation results have shown that the peak value of resistive leakage current depends not only on the phase of the 3$^{rd}$ harmonic voltage but also on the magnitude of it. In this paper, an approximated 5$^{th}$ order polynomial formula by the Least-Square-Technique was derived, and correction factors which compensate the error caused by the 3$^{rd}$ harmonic voltage were calculated.

Field trial on the control effect of fipronil bait against German cockroaches

  • Ree Han-Il;Lee In-Yong;Jeon Soung-Hoo;Yong Tai-Soon
    • Parasites, Hosts and Diseases
    • /
    • 제44권3호
    • /
    • pp.255-257
    • /
    • 2006
  • A field trial on the control effect of fipronil poison bait against German cockroaches (Blatella germanica) was carried out at different restaurant types in Sinchon, Seoul, Republic of Korea. Monitoring was performed applying food baited traps for 2 days per week. Reduction rates of German cockroaches by applying fipronil baits were 90.9% at Korean restaurants, 96.4% at Chinese restaurants, and 89.4% in beer hall kitchens after 4 weeks of the treatment. Overall average of the reduction rate was 93.9%. As the natural reduction rate at untreated restaurants was 11.5% after 4 weeks, a correction of the average reduction rate by applying the Abbot formula was 93.1 %.

박리유동장에서 저속 익형의 공기역학적 성능해석 (An Aerodynamic Performance Analysis of the Low-Speed Airfoils in Seperated Flow Field)

  • 유능수
    • 산업기술연구
    • /
    • 제15권
    • /
    • pp.153-168
    • /
    • 1995
  • The purpose of this study is to develop a method for predicting the aerodynamic performance of the subsonic airfoils in the 2-dimensional, steady and viscous flow. For this study, the airfoil geometry is specified by adopting the longest chord line system and by considering local surface curvature. In case of the inviscid-incompressible flow, the analysis is accomplished by the linearly varying strength vortex panel method and the Karman-Tsien correction law is applied for the inviscid-compressible flow analysis. The Goradia's integral method and the Truckenbrodt integral method are adopted for the boundary layer analysis of the laminar flow and the turbulent flow respectively. Viscous and inviscid solutions are converged by the Lockheed iterative calculating method using the equivalent airfoil geometry. And the analysis of the seperated flow is performed using the Dvorak and Maskew's method as the basic method. The wake effect is also considered and its geometry expressed by the formula of Summey & Smith when no seperation occurs. A computational efficiency is verified by the comparison of the computational results with experimental data and by the shorter execution time.

  • PDF

점성 유체중에 자유낙하 하는 니들과 스프링의 거동에 관한 연구 (STUDY ON THE BEHAVIOR OF NEEDLES AND SPRINGS FALLING FREELY IN A VISCOUS FLUID)

  • 고담;서용권
    • 한국전산유체공학회지
    • /
    • 제19권2호
    • /
    • pp.30-39
    • /
    • 2014
  • We report in this paper the analysis of the motion of a needle and a spring in a viscous fluid under the influence of gravitational force. Lateral shift as well as vertical motion of a needle falling in a viscous fluid has been observed from a simple experiment. We also observed the combined rotation and translation of a falling spring. The trajectory and velocity of the falling needle and the spring were obtained by using an image processing technique. We also conducted numerical simulation for both problems. For the falling-needle problem, we employed a theory; but it turns out that significant correction is required for the solutions to match the numerical and experimental data. For the falling spring problem various theoretical formula were tested for their justification, but none of the existing theories can successfully predict the numerical and experimental results.

하방 촬영된 깊이 영상을 이용한 신장 추정 (Estimation of Human Height Using Downward Depth Images)

  • 김흥준;이동석;권순각
    • 한국멀티미디어학회논문지
    • /
    • 제20권7호
    • /
    • pp.1014-1023
    • /
    • 2017
  • In this paper, we propose a method for estimating the human height by using downward depth images. We detect a point with the lowest depth value in an object as top of the head and estimate the height by calculating the depth difference with the floor. Since the depth of the floor varies depending on the angle of the camera, the correction formula is applied. In addition, the binarization threshold is variably applied so that height can be estimated even when several people are adjacent. Simulation results show that the proposed method has better performance than the conventional methods. The proposed method is expected to be widely used in body measurement, intelligent surveillance, and marketing.