• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.65-72
• /
• 2004

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The input active power factor correction (APFC) circuits can be implemented in either the two-stage approach or the single-stage approach. The two-stage approach can be classified into boost type PFC circuit and dc/dc converter. The power factor correction circuit with a boost converter used as an input power source is studied in this paper. In a boost power factor correction circuit there are two feedback control loops, which are a current feedback loop and a voltage feedback loop. In this paper, the regulation performance of output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of designed boost PFC circuit is confirmed by MATLAB simulation and experimental results.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.94-104
• /
• 1997

Most color imaging devices often exhibit color distortions due to the differences in realizable color gamuts and nonlinear characteristics of their components. In order to minimize color differences, it is desirable to apply color correction techniques. Th efirst step of color correction is to select the subset of the color coordinates representing the input color space. Th eselected subset serves as so called color samples to model the color distortion of a given color imaging device. The effectiveness of color correction is determined by the color sampels utilized in the modeling as well as the applied color correction technique. This paper presents a new selection method for color samples based on gentic algorithm. In the proposed method, structure of strings are designed so that the selected color samples fully represent the characteristics of color imaging device and consist of distinct color coordinates. To evaluate the performance of the selected color samples, they ar etuilized for three different color correction experiments. The experimentsal results are comapred with the crresponding results obtianed with the equally spaced color samples.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.42-50
• /
• 2001

In this paper, a new technique and theory are proposed which correct the orientation (inclination of a vertical axis) of a cylinder in vertical-micro positioning device. An algorithm for determining the orientation of the cylinder with a pair of displacement sensor units is derived and two types of the correction methods are described. To assess the performance and efficiency of the developed correction technique, the compensation errors originated from the correction algorithm and the machined characteristics of cylinder surface are evaluated from the geometrical considerations and the statistical techniques. Based upon the evaluation results, the maximum compensation error is estimated for the orientation of cylinder and the optimum correction technique is derived.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.57-60
• /
• 2014

The distortion correction system of Head up display that is installed in vehicle has been studied both experimentally and theoretically for the removal of the optical lens distortion. A new adaptive correction method is having a decisive effect on correction in the optical lens distortion of Head up display. This adaptive correction system removes various distortion that has occurred because of the design tolerances of Head up display and the assemble tolerances into vehicle. It is especially efficient in removal of a barrel distortion and pin cushion of Head up display.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.50-54
• /
• 2017

The goal of surgical correction for hallux valgus is to achieve a painless, shoe-wearable, and relatively straight toe with a balanced joint motion that results in aesthetically and functionally satisfactory toe. To date, there has not been a consensus on the ultimate surgical procedure for hallux valgus correction. Unfortunately, such a consensus may be difficult since it is not uncommon to encounter complications after hallux valgus correction. Postoperative soft tissue complications include difficult wound healing, infection, hypertrophy, or pain of the scar, joint stiffness, and tendon or sensory nerve damage. Postoperative bony complications include malunion, nonunion, failure of fixation, failure of angle correction, recurred deformity, osteomyelitis, and failure of balance between the metatarsal heads. Herein, we review common complications after surgical correction of hallux valgus, such as stiff joint, bony complications, recurrence of the deformity, and hallux varus.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.17-27
• /
• 2017

In this study, the characteristics of site amplification at seismic observation stations in Japan were estimated using the attenuation relationship of each station's response spectrum. Ground motion records observed after 32 earthquakes were employed to construct the attenuation relationship. The station correction factor at each KiK-net station was compared to the transfer functions between the base rock and the surface. For each station, the plot of the station correction factor versus the period was similar in shape to the graphs of the transfer function (amplitude ratio versus period). Therefore, the station correction factors are effective for evaluating site amplifications considering the period of ground shaking. In addition, the station correction factors were evaluated with respect to the average shear wave velocities using a geographic information system (GIS) dataset. Lastly, the site amplifications for specific periods were estimated throughout Japan.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.67-74
• /
• 2002

The geometriccorrection of a satellite imagery is performed by making a systematic correction with satellite ephemerides and attitude angles followed by employing the Ground Control Points (GCSs) or Digital Elevation Models (DEMs). In a remote area or an inaccessible area, however, GCPs are unavailable to be surveyed and thus they can be obtained only by reading maps, which are not accurate in reality. In this study, we performed the systematic correction process to the inaccessible area and the precise geometric correction process to the adjacent accessible area by using GCPs. Then we analyzed the correlation between the two geo-referenced Korea Multiurpose Satellite (KOMPSAT-1 EOC) images. A new geometrical correction for the inaccessible area imagery is achieved by applying the correlation to the inaccessibleimagery. By employing this new method, the accuracy of the inaccessible area imagery is significantly improved absolutely and relatively.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.29-33
• /
• 2002

In order to utilize remote sensed images widely, it is necessary to correct geometrically. Traditional approaches to geometric correction require substantial human operations. Such substantial human operations make geometric correction a laborious and tedious process. In this paper, We introduce concept of GCP(Ground Control Point) Chip and generate a GCP Chip for automatic geometric correction. GCP Chip is small image patch which has a GCP in reference coordinate image. GCP Chip will be used to match new images in geometric correction. We generated GCP chip using Landsat-7 ETM+ panchromatic band image in this study. Henceforth this result will support automatic process in geometric correction.