• Imaging Science in Dentistry
• /
• 제49권1호
• /
• pp.35-43
• /
• 2019

Purpose: The goal of this study was to assess the accuracy and reliability of a low-cost portable scanner (Scanify) for imaging facial casts compared to a previously validated portable digital stereophotogrammetry device (Vectra H1). This in vitro study was performed using 2 facial casts obtained by recording impressions of the authors, at King's College London Academic Centre of Reconstructive Science. Materials and Methods: The casts were marked with anthropometric landmarks, then digitised using Scanify and Vectra H1. Computed tomography (CT) scans of the same casts were performed to verify the validation of Vectra H1. The 3-dimensional (3D) images acquired with each device were compared using linear measurements and 3D surface analysis software. Results: Overall, 91% of the linear Scanify measurements were within 1 mm of the corresponding reference values. The mean overall surface difference between the Scanify and Vectra images was <0.3mm. Significant differences were detected in depth measurements. Merging multiple Scanify images produced significantly greater registration error. Conclusion: Scanify is a very low-cost device that could have clinical applications for facial imaging if imaging errors could be corrected by a future software update or hardware revision.

• Korean Journal of Radiology
• /
• 제25권3호
• /
• pp.243-256
• /
• 2024

Objective: We aimed to investigate whether 2-[¹⁸F]fluoro-2-deoxy-D-glucose positron emission tomography/computed tomography (2-[¹⁸F]FDG PET/CT) can aid in evaluating the risk of malignancy in ampullary tumors detected by endoscopy. Materials and Methods: This single-center retrospective cohort study analyzed 155 patients (79 male, 76 female; mean age, 65.7 ± 12.7 years) receiving 2-[¹⁸F]FDG PET/CT for endoscopy-detected ampullary tumors 5-87 days (median, 7 days) after the diagnostic endoscopy between June 2007 and December 2020. The final diagnosis was made based on histopathological findings. The PET imaging parameters were compared with clinical data and endoscopic features. A model to predict the risk of malignancy, based on PET, endoscopy, and clinical findings, was generated and validated using multivariable logistic regression analysis and an additional bootstrapping method. The final model was compared with standard endoscopy for the diagnosis of ampullary cancer using the DeLong test. Results: The mean tumor size was 17.1 ± 7.7 mm. Sixty-four (41.3%) tumors were benign, and 91 (58.7%) were malignant. Univariable analysis found that ampullary neoplasms with a blood-pool corrected peak standardized uptake value in earlyphase scan (SUVe) ≥ 1.7 were more likely to be malignant (odds ratio [OR], 16.06; 95% confidence interval [CI], 7.13-36.18; P < 0.001). Multivariable analysis identified the presence of jaundice (adjusted OR [aOR], 4.89; 95% CI, 1.80-13.33; P = 0.002), malignant traits in endoscopy (aOR, 6.80; 95% CI, 2.41-19.20; P < 0.001), SUVe ≥ 1.7 in PET (aOR, 5.43; 95% CI, 2.00-14.72; P < 0.001), and PET-detected nodal disease (aOR, 5.03; 95% CI, 1.16-21.86; P = 0.041) as independent predictors of malignancy. The model combining these four factors predicted ampullary cancers better than endoscopic diagnosis alone (area under the curve [AUC] and 95% CI: 0.925 [0.874-0.956] vs. 0.815 [0.732-0.873], P < 0.001). The model demonstrated an AUC of 0.921 (95% CI, 0.816-0.967) in candidates for endoscopic papillectomy. Conclusion: Adding 2-[¹⁸F]FDG PET/CT to endoscopy can improve the diagnosis of ampullary cancer and may help refine therapeutic decision-making, particularly when contemplating endoscopic papillectomy.

• Radiation Oncology Journal
• /
• 제26권4호
• /
• pp.280-288
• /
• 2008

목 적: 토모테라피 영상유도장치인 MVCT (mega-voltage computed tomography) 영상을 이용하여 자유 호흡시 분할 치료 간 간조직의 위치변화 양상을 알아보고자 하였다. 대상 및 방법: 2006년 4월부터 2007년 8월까지 간종양에 토모테라피를 받은 환자 26 명을 대상으로 치료 시작 후 10회까지 매회 치료시의 MVCT 영상을 분석하였다. 1차적으로 골격 구조에 따라 셋업오차보정을 한 상태에서 2차원 직교좌표계 상에서 간조직 경계부위의 위치 변화를 치료계획 KVCT (Kilo-Voltage Computed Tomography)와 MVCT의 영상융합을 통해 비교하여 오차 정도를 파악하였다. 간종양의 위치 별 변화 양상을 보기 위하여 종양 위치를 Couinaud's proposal을 기준으로 1군(Segment 1), 2군(Segment 2, 3, 4), 3군(Segment 5, 6), 4군(Segment 7, 8)으로 나누어 각 군별 위치 변화 양상을 비교하였다. 결 과: MVCT를 통해 알아본 평균 셋업오차는 각각 $0.45{\pm}2.04\;mm$ (좌-우), $0.97{\pm}4.06\;mm$ (상-하), $8.38{\pm}4.67\;mm$ (전-후) 이었다. 2군에서 전방 바깥쪽으로 $2.80{\pm}1.73\;mm$, 좌방 안쪽으로 $2.23{\pm}1.37\;mm$ 이동하였고 4군에서는 전, 후, 좌, 우 각 방향으로 $-0.15{\pm}3.93\;mm$, $-3.15{\pm}6.58\;mm$, $-0.60{\pm}3.58\;mm$, $-4.50{\pm}5.35\;mm$ 이동하였다. 1, 2, 3군에서 후방으로의 위치 변화는 평균 1 mm 이내였다(각각 $0.07{\pm}0.9 \;mm$, $-0.07{\pm}1.38\;mm$, $0.50{\pm}0.47\;mm$). MVCT 값들의 적용 시 보이는 2군에서의 종양체적 감소는 위 독성을 증가시킬 것으로 생각되었다. 결 론: 분할치료 간 간조직의 위치 변화 양상은 각 군마다 편차가 있는 가운데 어느 정도 규칙적이었다. 호흡에 의한 간조직의 기하학적 변형은 segment 2, 3, 4에서 좌방 표적 체적의 감소를 가져오는 반면 segment 5, 6에서는 호흡에도 불구하고 안정적인 양상을 나타내었다. 따라서 자유 호흡 상태에서 간 좌엽에 대한 방사선치료 시 위에 대한 독성을 줄이기 위해 보다 세심한 접근이 필요하다.

• 핵의학기술
• /
• 제14권1호
• /
• pp.3-7
• /
• 2010

종양학에서 암의 진단, 병기 결정, 재발 판정, 그리고 치료에 대한 반응의 평가에 PET/CT의 유용함은 이미 인정되고 있다. 그런데 크기가 작거나 폐의 기저 부위, 혹은 간의 상부에 위치한 종양일수록 호흡으로 인한 위치 변위와 왜곡의 정도가 크며 PET영상의 SUV에도 영향을 미치게 된다. 따라서 정상 호흡 상태에서 얻어지는 PET 또는 CT영상을 토대로 방사선 치료를 하게 되면 치료해야 할 표적이 치료 범위에서 벗어나거나 정상 조직에 과도한 방사선이 조사될 수 있으므로 치료율이 낮아지거나 방사선에 의한 부작용이 증가할 수 있다. 본 논문의 목적은 호흡에 의한 인공산물을 최소화하고 보다 정확한 SUV 측정을 위해 ACT를 이용한 감쇠 보정 방법을 적용하여 그 유용성을 평가하고자 함이다. 하 흉부에 종양이 있는 13명의 환자를 대상으로 Discovery STE8 PET/CT스캐너를 사용하여 두 가지의 PET/CT영상을 얻었다. HCT를 사용한 감쇠 보정 영상과 ACT를 사용한 감쇠 보정 영상에서 측정한 인공물의 크기와 $SUV_{max}$를 비교 분석하였다. 인공물은 모든 환자의 하 흉부의 백색 음영 영역을 측정하여 평가하였다. $SUV_{max}$는 주요 종양의 $SUV_{max}$를 측정하여 평가하였다. 분석 프로그램은 Advantage Workstation v4.3을 사용하였다. 환자에게 7.4 MBq (0.2 mCi)/kg의 $^{18}F$-FDG를 투여한 1시간 뒤 스캔하였다. 방출 스캔은 3 min/bed로 스캔하였다. HCT 보정 영상과 비교하여 ACT 보정 영상에서 인공산물의 크기가 눈에 띄게 줄어든 것을 관찰할 수 있었다. 하 흉부의 저 보정으로 인한 인공산물 크기는 ACT 보정 영상과 HCT 보정 영상 각각 $1.5{\pm}3.5$ cm과 $13.4{\pm}4.2$ cm를 나타냈다. 주요 병소의 $SUV_{max}$의 변화는 ACT 보정 영상이 HCT 보정 영상보다 눈에 띄게 상승하였다. ACT 보정 영상에서 HCT영상과 비교하여 tumor의 $SUV_{max}$가 평균 $5.3{\pm}3.9%$ 상승하였다. 가장 큰 차이를 보인 종양은 lung의 lower lobe에 있는 종양으로 $SUV_{max}$ 7.7에서 $SUV_{max}$ 8.7로 13% 상승하였다. ACT를 이용한 감쇠 보정 영상은 하 흉부의 인공산물을 눈에 띄게 줄일 수 있어 보다 정확한 병소의 SUV를 측정 및 방사선 치료 범위 설정에 도움이 될 수 있을 것이다. 또한 ACT 기법은 병소가 횡격막 부근에 있는 환자의 경우 폐와 간의 경계를 보다 정확히 구분할 수 있어 판독시 도움이 될 수 있을 것이라고 판단된다. 추가 ACT 촬영에 의한 피폭 선량이 증가하는 점을 고려하여 적용한다면 임상적으로 유용한 효과가 있다고 사료된다.

• Imaging Science in Dentistry
• /
• 제39권3호
• /
• pp.133-147
• /
• 2009

Purpose : To investigate the reproducibilities and compare the measurements in digital and MDCT-synthesized cephalometric radiograph, and to investigate the effect of head position on the measurement during imaging with MDCT. Materials and Methods : Twenty-two dry skulls (combined with mandible) were used in this study. Conventional digital cephalometric radiograph was taken in standard position, and MDCT was taken in standard position and two rotated position ($10^{\circ}$ left rotation and $10^{\circ}$ right tilting). MDCT data were imported in $OnDemand^{(R)}$ and lateral cephalometric radiograph were synthesized from 3D virtual models. Two types of rotated MDCT data were synthesized with default mode and with corrected mode using both ear rods. For all six images, sixteen angular and eleven linear measurements were made in V-$Ceph^{(R)}$ three times. Reproducibility of measurements was assessed using repeated measures ANOV A and ICC. Linear and angular measurements were compared between digital and five MDCT-synthesized images by Student t-test. Results : All measurements in six types of cephalometric radiograph were not statistically different under ICC examination. Measurements were not different between digital and MDCT-synthesized images (P>.05). Measurements in MDCT-synthesized image in $10^{\circ}$ left rotation or $10^{\circ}$ right tilting position showed possibility of difference from digital image in some measurements, and possibility of improvement via realignment of head position using both ear rods. Conclusion : MDCT-synthesized cephalometric radiograph can substitute conventional cephalometric radiograph. The error on head position during imaging with MDCT have possibility that can produce measurement errors with MDCT-synthesized image, and these position error can be corrected by realignment of the head position using both ear rods.

• 대한안과학회지
• /
• 제59권11호
• /
• pp.1097-1102
• /
• 2018

목적: 클로르페나피르 음독 후 중추신경계 손상을 동반한 독성 시신경병증 1예를 보고하고자 한다. 증례요약: 44세 여자가 7일 전부터의 양안 시력저하를 주소로 내원하였다. 환자는 내원 2주 전 자살 목적으로 클로르페나피르 한 모금을 음독했고, 직후 근처 병원에서 위세척을 시행하였다. 초기 최대교정시력은 우안 안전수지 30 cm, 좌안 안전수동이었다. 양안 동공은 5.0 mm로 커져 있었고, 빛에 대한 반응은 느렸으며 좌안에는 상대구심동공운동장애가 관찰되었다. 안저검사에서 양안 시신경유두부종이 관찰되었고, 뇌자기공명영상에서 양안 시신경과 속섬유막, 뇌량, 중소뇌각, 뇌간 등 백질 신경로를 따라 양쪽에 대칭적인 고강도신호가 관찰되었다. 클로르페나피르 중독으로 인한 독성 시신경병증으로 진단 후, 고용량 스테로이드치료를 3일간 시행하였으나 양안 최대교정시력은 광각무로 악화되었다. 3개월 후, 안저검사에서 양안 시신경위축이 관찰되었고, 빛간섭단층촬영에서 망막신경섬유층 및 신경절세포-내망상세포층 두께가 감소하였다. 결론: 매우 적은 양이라도 클로르페나피르에 노출되면 적절한 치료에도 불구하고 잠복기를 거쳐 심각한 시신경손상이 발생할 수 있으므로 주의해야 하겠다.

• 핵의학기술
• /
• 제13권3호
• /
• pp.147-151
• /
• 2009

Purpose: 2-[$^{18}F$]Fluoro-2-deoxy-D-glucose ([$^{18}F$]FDG) particularly plays as a important role in Positron Emission Tomography (PET) imaging in nuclear medicine. Domestic [$^{18}F$]FDG auto synthesizers are installed in Seoul National University Bundang Hospital (SNUBH) at June 2008, these modules were known that it's synthetic yields were guaranteed in average $45{\pm}5%$ so far. To improve yields and convenience of domestic [$^{18}F$]FDG auto synthesizer, numerous trials in reaction time, base concentration, pressure and temperature were performed to increase [$^{18}F$]FDG yields. Materials and Methods: Several synthetic factors (temperature, time and pressure) and shortcoming were corrected based on many evaporation test. Syringe dispensing of tetra-butylammonium bicarbonate (TBAB) was replaced with micro pipette to prepare tetrabutyl ammonium fluoride salt ([$^{18}F$]TBAF). Troublesome refill of liquid nitrogen every 2 hours which was used to protect vacuum system was changed to charcoal cartridge, base guard filter. To monitor the volume of delivered $[^{18}O]OH_2$ from cyclotron by surveillance camera, we set up the volumetric vial on the cover of the module. In addition to, the recovery vial was added in [$^{18}F$]FDG production system to recover [$^{18}F$]FDG loss due to the leak of valve ($V_{13,14}$) in [$^{18}F$]FDG purification process. Results: When we used micro pipette for adding TBAB ($30\;{\mu}L$ in 12% $H_2O$ in acetonitrile), this quantitative dispensation has enabled to improve $5.5{\pm}1.7%$ residual fluorine-18 activity in fluorine separation cartridge compared to syringe adding. Besides, the synthetic yields of [$^{18}F$]FDG has increased $58{\pm}2.6%$ (n=19), $58{\pm}2.9%$ (n=14), $60%{\pm}2.5%$ (n=17) for 3 months. The life cycle of charcoal cartridge and base vacuum was 3 months prior to filling liquid nitrogen every 2 hours and additional side separator can prevent pump corrosion by organic solvent. After setting of volumetric indicator vial, the operator can easily monitor the total volume of irradiated $[^{18}O]OH_2$ from cyclotron. The recovery vial can be used for the stabilizer when an irregular [$^{18}F$]FDG loss was generated by the leak of valves ($V_{13,14}$). Conclusions: We has optimized appropriate synthetic conditions (temperature, time, pressure) in domestic [$^{18}F$]FDG auto synthesizer. In addition to, the remodeling with several accessories improve yields of domestic [$^{18}F$]FDG auto synthesizer with reliable reproducibility.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.237-247
• /
• 2020

Objective : Fixation of the C1-2 segment is challenging because of the complex anatomy in the region and the need for a high degree of accuracy to avoid complications. Preoperative 3D-computed tomography (CT) scans can help reduce the risk of complications in the vertebral artery, spinal cord, and nerve roots. However, the patient may be susceptible to injury if the patient's anatomy does not match the preoperative CT scans. The intraoperative 3D image-based navigation systems have reduced complications in instrument-assisted techniques due to greater accuracy. This study aimed to compare the radiologic outcomes of C1-2 fusion surgery between intraoperative CT image-guided operation and fluoroscopy-guided operation. Methods : We retrospectively reviewed the radiologic images of 34 patients who underwent C1-2 fusion spine surgery from January 2009 to November 2018 at our hospital. We assessed 17 cases each of degenerative cervical disease and trauma in a study population of 18 males and 16 females. The mean age was 54.8 years. A total of 139 screws were used and the surgical procedures included 68 screws in the C1 lateral mass, 58 screws in C2 pedicle, nine screws in C2 lamina and C2 pars screws, four lateral mass screws in sub-axial level. Of the 34 patients, 19 patients underwent screw insertion using intraoperative mobile CT. Other patients underwent atlantoaxial fusion with a standard fluoroscopy-guided device. Results : A total of 139 screws were correctly positioned. We analyzed the positions of 135 screws except for the four screws that performed the lateral mass screws in C3 vertebra. Minor screw penetration was observed in seven cases (5.2%), and major pedicle screw penetration was observed in three cases (2.2%). In one case, the malposition of a C2 pedicle screw was confirmed, which was subsequently corrected. There were no complications regarding vertebral artery injury or onset of new neurologic deficits. The screw malposition rate was lower (5.3%) in patients who underwent intraoperative CT-based navigation than that for fluoroscopy-guided cases (10.2%). And we confirmed that the operation time can be significantly reduced by surgery using intraoperative O-arm device. Conclusion : Spinal navigation using intraoperative cone-beam CT scans is reliable for posterior fixation in unstable C1-2 pathologies and can be reduced the operative time.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.125-130
• /
• 2006

풍암분지 내에 위치한 시험시추공을 중심으로 서로 직각인 2개 측선을 따라 획득한 지표 굴절법 및 원거리 수직탄성파 자료의 초동을 토모그래피 방식으로 동시에 역산하였다. 지표 탄성파자료는 48개 타격점에서 5kg 해머로 발생시킨 지진파를 3 m 간격 21개 지표지오폰과 1개 3성분 공내지오폰으로, 수직탄성파 자료는 수평거리 $-19.5{\sim}+19.5\;m$ 범위에서 해머로 발생한 지진파를 공내 $9{\sim}99\;m$ 깊이구간에서 3성분으로 각각 기록하였다. 지진파총 자료를 이용하여 지표 굴절파자료의 지연시간을 보정한 후, 지표 및 시추공 초동자료를 동시에 역산하고 속도 토모그램을 작성하였다. 속도 토모그램은 시추공 위치에서 속도 750 m/s 이하의 표토층이 1.8 m 두께로 분포하며, 신선한 암석층이 깊이 12 m 정도부터 존재함을 보인다. 깊이 $31{\sim}40\;m$ 구간에서 5353m/s의 암석층 속도는 깊이 $65{\sim}73\;m$ 구간에서 4262 m/s로 변한다. 시추코아 자료와 비교할 때, 이러한 큰 속도변화는 암종 및 파쇄의 영향인 것으로 판단된다.

• International Journal of Oral Biology
• /
• 제42권4호
• /
• pp.155-161
• /
• 2017

Teeth and bones are highly mineralized tissues containing inorganic minerals such as calcium phosphate, and a growing number of evidences show that their mineral content is associated with many diseases. Although the quantification of mineral contents by micro-computed tomography(micro- CT) has been used in diagnosis and evaluation for treating bone diseases, its application for teeth diseases has not been well established. In this study, we attempted to estimate a usefulness of a high-resolution micro-CT in analysis of human teeth. The teeth were scanned by using the Skyscan 1172 micro-CT. In order to measure tooth mineral content, beam hardening effect of the machine was corrected with a radiopaque iodine-containing substance, iodoacetamide. Under the maximum resolution of $6.6{\mu}m$, X-ray densities in teeth and hydroxyapatite standards were obtained with Hounsfield unit (HU), and they were then converted to an absolute mineral concentration by a CT Analyzer software. In enamel layer of cusp area, the mean mineral concentration was about $2.14mg/mm^3$ and there was a constant mineral concentration gradient from the enamel surface to the dentinoenamel junction. In the dentin of middle 1/3 of tooth, the mean mineral concentration was approximately $1.27mg/mm^3$ and there was a constant mineral concentration gradient from the outer of root to the pulp side, ranging from 1.3 to $1.06mg/mm^3$. In decay region of dentin, the mineral content was gradually decreased from the intact inner side to the decayed surface. These results suggest that high-resolution micro-CT can be as a useful tool for non-invasive measurement of mineral concentration in teeth.