• 한국추진공학회지
• /
• 제23권4호
• /
• pp.10-20
• /
• 2019

충격파 개념을 이용하는 유체 추력벡터 제어는 빠른 벡터링 응답, 간단한 구조 및 낮은 무게로 인하여 큰 벡터링 성능을 달성하는데 많은 이점을 제공한다. 본 논문에서는 전산유체역학 기법을 사용하여 슬롯 인젝터를 가진 3차원 직사각형 초음속 노즐에 대하여 연구를 수행하였다. 계산 방법론을 검증하기 위하여 수치 결과를 실험 데이터로 비교하였다. 대칭 평면에서의 상부 및 하부 노즐벽을 따르는 압력분포는 시험 결과와 잘 일치하였다. $k-{\omega}$ SST 난류모델을 기반으로 한 수치해석을 통하여, 운동량 플럭스 비율의 영향을 철저히 조사하여 추력의 성능 변화를 명확하게 나타내었다.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.313-319
• /
• 2021

The national geodetic reference frame of Korea was adopted in 2003, which is referenced to ITRF (International Terrestrial Reference Frame) 2000 at the epoch of January 1, 2002. For precise positioning based on the satellites, it should be thoroughly maintained to the newest global reference frame. Other than plate tectonic motion, there are significant events or changes such as earthquakes, antenna replacement, PSD (Post-Seismic Deformation), seasonal variation etc. We processed three years of GNSS (Global Navigation Satellite System) data(60 NGII CORS stations, 51 IGS core stations) to produce daily solutions minimally constrained to ITRF. From the time series of daily solutions, the sites with unexpected discontinuity were identified to set up an event(mostly antenna replacement). The combined solution with minimum constraints was estimated along with the velocity, the offsets, and the periodic signals. The residuals show that the surrounding environment also affects the time series to a certain degree, thus it should be improved eventually. The transformation parameters to ITRF2014 were calculated with stability and consistency, which means the national geodetic reference frame is properly aligned to the global reference frame.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2650-2659
• /
• 2022

The dense granular flow spallation target is a new target concept proposed for an Accelerator-Driven Sub-critical (ADS) system. In this paper, the beam-target configurations of a tungsten granular flow target for the ADS with a thermal power of 1 GW is explored. The beam profile options using different scanning methods are discussed. The critical geometry parameters are adjusted to investigate the performance of the granular target from the aspects of neutron efficiency, stability and temperature distribution in target medium. To figure out how the target under accident conditions would behave, different clogging conditions are induced in the simulation. The dynamic processes are analyzed and some important parameters such as abnormal temperature rise and beam cutoff time window are obtained. The response of the sub-critical reactor to a clogging accident is also investigated. It is indicated that the monitoring of the granular flow by the neutron detectors in the sub-critical core will be effective.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.732-740
• /
• 2021

Scattering resonance of medium mass nuclides leads complex spectrum in the fast reactor, which requires thousands of energy groups in the spectrum calculation. When the broad-group cross sections are collapsed, reaction rate cannot be completely conserved. To eliminate the error from energy collapsing, the Super-homogenization method in energy collapsing (ESPH) was employed in the fast reactor code SARAX. An ESPH factor was derived based on the ESPH-corrected SN transport equation. By applying the factor in problems with reflective boundary condition, both the effective multiplication factor and reaction rate were conserved. The fixed-source iteration was used to ensure the stability of ESPH iteration. However, in the energy collapsing process of SARAX, the vacuum boundary condition was adopted, which was necessary for fast reactors with strong heterogeneity. To further reduce the error caused by leakage, an additional conservation factor was proposed to correct the neutron current in energy collapsing. To evaluate the performance of ESPH with conservation factor, numerical benchmarks of fast reactors were calculated. The results of broad-group calculation agreed well with the direct full-core Monte-Carlo calculation, including the effective multiplication factor, radial power distribution, total control rod worth and sodium void worth.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3183-3193
• /
• 2023

The water radiolysis in-core at light water reactors (LWRs) produces various radicals with other ionic species/molecules and radioactive nitrogen species in the reactor coolant. Nitrogen species can exist in many different chemical forms and recirculate in water and steam, and consequently contribute to what extent the environmental safety at nuclear power plants. Therefore, a clear understanding of formation kinetics and chemical behaviors of nitrogen species under irradiation is crucial for better insight into the characteristics of major radioactive species released to the main steam or relevant coolant systems and eventually development of advanced processes/methodologies to enhance the environmental safety at nuclear power plants. This paper thus focuses on basic principles on electrochemical interaction kinetics of radiolytic molecules and various nitrogen species in high temperature water, fundamental approaches for calculating thermodynamic values to predict their stability and domain in LWRs, and the effect of nitrogen species on crevice chemistry/corrosion and intergranular stress corrosion cracking (IGSCC) susceptibility of structure materials in high temperature water.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권3호
• /
• pp.12-15
• /
• 2010

Important key technologies of high-$T_c$ superconducting (HTS) transformer may include the HTS wire technology, bushing technology, cooling technology, AC loss, reduction technology, large current technology, and cryogenic temperature insulation technology. From among others, the cryogenic temperature insulation technology may be specifically a core technology for ensuring reliability for the smaller size, stability, economic efficiency, and power supply of a transformer. Therefore, the electric insulation technology of a superconducting transformer should be prerequisite. Such relevant studies are ongoing, but still, they are very insufficient for establishing the cryogenic insulation technology as of yet. Therefore, this paper simulated HTS transformer applied with continuous transposed conductor (CTC), which has been studied as a way of reducing AC loss. Also, the paper analyzed the insulation configuration of HTS transformer and bushing, and, accordingly, reviewed various characteristics of insulation breakdown out of liquid nitrogen. Thus, the paper constituted insulation database, and it is going to design the insulation of a transmission class HTS transformer and bushing.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.517-525
• /
• 2022

Objective: The rehabilitation protocols for functional recovery have been emphasized after total knee arthroplasty, and Pilates is in the spotlight as a safe and easily modified exercise method. The purpose of this study was to investigate the effects of mat Pilates exercise on lower extremity function, postural balance, and walking in the individuals with total knee arthroplasty. Design: One group pretest-posttest design. Methods: Eighteen older women with unilateral total knee arthroplasty was recruited in the study. The subjects were evaluated on lower extremity function, postural balance, and walking before and after mat Pilates exercise. All subject performed one hour mat Pilates exercise, 3 times a week for 8 weeks. Mat Pilates exercises were focused on core stability and lower extremity strengthening and, more dynamic movements were added to increase the difficulty of movements every two weeks. The lower extremity function was measured using the Western Ontario and McMaster Osteoarthritis Index (WOMAC), knee joint position sense, and five times sit-to-stand test. Postural balance was assessed by single leg stance test, functional reach test, and timed up and go test. Walking was measured by OptoGait system to temporospatial parameter. Results: The lower extremity function, postural balance, and walking were significantly improved after mat Pilates exercise, except for five times sit-to-stand test (p<0.05). Conclusions: This study demonstrated that the mat Pilates exercise was a useful method to improve lower extremity function, postural balance, and walking in the older women with unilateral total knee arthroplasty.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.103-118
• /
• 2022

With the recent increase in demand for electronic devices, multi-layer ceramic capacitors (MLCCs) have become the most important core component. In particular, the next-generation MLCC with extremely high reliability is required for the 4^th industrial revolution and electric vehicle applications. Therefore, it is necessary to develop dielectric ceramic materials with high dielectric properties and reliability. During the decades, electrical properties of BaTiO₃ based dielectric ceramics, which have been widely used in MLCC industrial field, have been improved by microstructure and defect chemistry control. However, electrical properties of BaTiO₃ have reached their limits, and new types of dielectric materials have been widely studied. Based on these backgrounds, this report presents the recent development trends of BaTiO₃-based dielectric materials for the next-generation MLCCs, and suggests promising candidates to replace BaTiO₃ ceramics.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.519-533
• /
• 2023

This work focuses on the dynamic analysis of thermal barrier coated straight and curved turbine blades modelled as functionally graded sandwich panel under thermal environment. The pre- twisted straight/curved blade model is considered to be fixed to the hub and, the complete assembly of the hub and blade are assumed to be rotating. The functionally graded sandwich composite blade is comprised of functionally graded face-sheet material and metal alloy core. The constituents' material properties are assumed to be temperature-dependent, however, the overall properties are evaluated using Voigt's micromechanical scheme in conjunction with the modified power-law functions. The blade model kinematics is based on the equivalent single-layer shear deformation theory. The equations of motion are derived using the extended Hamilton's principle by including the effect of centrifugal forces, and further solved via 2D- isoparametric finite element approximations. The mesh refinement and validation tests are performed to illustrate the stability and accurateness of the present model. In addition, frequency characteristics of the pre-twisted rotating sandwich blades are computed under thermal environment at various sets of parametric conditions such as twist angles, thickness ratios, aspect ratios, layer thickness ratios, volume fractions, rotational velocity and blade curvatures which can be further useful for designing the blade type structures under turbine operating conditions.

• 대한치과교정학회지
• /
• 제41권1호
• /
• pp.25-35
• /
• 2011

교정용 마이크로 임플란트는 나사산을 매개수단으로 한 인접골 압박으로 골내 고정력을 얻는다. 그러므로 충분한 고정력을 얻기 위해서는 나사산이 크면 유리하다. 그러나 몸체에서 차지하는 나사산의 부피비율이 과도하면 이는 코어(core) 직경을 감소시켜 파절위험성을 증대시킬 뿐 아니라, 식립 시 나사산이 골을 지나치게 압박, 인접골에 골개형 장애를 일으켜 임플란트를 이완시키는 원인이 될 수도 있다. 따라서 마이크로 임플란트의 안정성은 그 나사산 디자인이 치밀골 특성과 조화를 이루어야 한다. 본 연구에서는 $Absoanchor^{(R)}$ SH1312-7 (Dentos Inc., Daegu, Korea) 모델을 비교모델로 선택, 몸체와 나사산 사이즈의 조화를 이루기 위한 최적화 해석을 실행하였다. 나사산의 높이(h)와 피치(p)를 디자인 변수로 하여 임플란트 안정성 증대, 식립 시 골 과부하 감소, 파절강도 증대를 목표로 목적함수 SQ(Stability Quotient)를 설정, 해석함으로써 4가지의 다른 h, p 조합을 갖는 나사산을 디자인하였다. 4종의 실험모델과 비교모델에 대해 3D 유한요소법을 이용한 임플란트 식립모사 해석으로, 식립 시 예상되는 골 과부하 영역을 비교하였으며(self tapping과 self drilling의 두 식립 방식에 대해), 또한 실험모델의 실물(prototype)을 가공, 토오크 파절 시험을 실시하였다. 평가결과, 실험모델은 비교모델에 비해 식립 시 인접골 과부하 영역을 덜 발생시켰으며, 파절강도는 더 높게 관찰되었으며, 이로써 나사산 디자인 최적화에 사용된 SQ의 타당성을 확인할 수 있었다.