• Journal of the Chungcheong Mathematical Society
• /
• v.28 no.2
• /
• pp.287-305
• /
• 2015

Hyperbolicity is a core of dynamics. Shadowness and expansiveness for homeomorphisms have been studied by J. Om-bach([3], [4], [5]). We study the hyperbolicity (i.e., expansivity and the shadowing property) and the Anosov relation for a closed relation.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.38-44
• /
• 2010

Core-shell particles of inorganic/organic pair were synthesized from $CaCO_3$ absorbed sodium dodecyl benzene sulfonate(SDBS) surfactant. Shell components were synthesized by sequential emulsion polymerization. Various monomers were used as shell components such as methyl methacrylate(MMA), ethyl acrylate(EA), butyl acrylate(BA), and styrene(St). Ammonium persulfate(APS) was used as an initiator and 2-ethylhexyl acylate(2-EHA) was used as a functional monomer, In the $CaCO_3$/organic core-shell particle polymerization, $CaCO_3$ absorbed surfactant SDBS of 0.5 wt% was prepared first and then core $CaCO_3$ was encapsulated by emulsion polymerization. 0.1 wt% of APS was added sequentially to minimize the formation of new monomer particle during shell polymerization. The structure of inorganic/organic core-shell particles were characterized by measuring the decomposition degree of $CaCO_3$ using HCl solution, thermogravimetric analyzer, scanning electron microscope, and transmission electron microscope.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.264-270
• /
• 2011

This paper focuses on possibility to design and fabrication new combination of bullet core to substitute current toxic material of heavy metal such as lead by environment-friendly ones. The core is designed as dual structure to manipulate the core center of gravity easily by combining materials, which of basis is tungsten of low cost and easily acquired. Those combinations are W-M series such as W-Cu, W-Sn, W-Cu-Sn, and W-Cu-Ni to target the density of lead, $11.34g/cm^3$ through powder-metallurgy. Out of four, combination of W-Cu-Ni shows the highest compression density of 96% and is confirmed as the most suitable substitution for lead due to the excellent property of matter and sintering. All combination samples is simulated on the PRODAS software for designing and structure analysis by adjusting the center of gravity of dual core samples forward and backward. The simulations confirm the similarity of current bullet core with respect to properties of mass, aero dynamics, and flying stability.

• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.411-415
• /
• 2010

A sandwich panel which is comprised of truss cores faced with solid face sheets is lightweight and multi-functional. So it is widely used to not only structural material but also heat transfer media in transportation field such as airplane, train and vessel. There are various core topologies such as pyramidal and tetrahedral truss, square honeycombs and kagome truss. The study focused on analytical approach to optimize compression and shear quality of the unit cell of PCM with pyramidal configuration. With various unit cell models which have the same core weight per unit area but different truss member angle, analytical solution for effective stress ($\bar{\sigma},\bar{\tau}$), peak stress ($\bar{\sigma}_{peak},\bar{\tau}_{peak}$) by yielding and buckling, relative density ($\bar{\rho}_c$) and effective stiffness ($\bar{E},\bar{G}$) have been computed and compared each other. With this approach, the most optimal core configuration was predicted. The result has become the efficient guidelines for the design of PCM core structure.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.60
• /
• pp.47-77
• /
• 2013

The way for seller to procure the goods for selling is to produce the goods at his own factory and to buy the manufactured goods from the other company. In order to produce the goods for selling the seller have to obtain the resource from the domestic company or overseas. In the middle of producing the goods to sell, seller may breach the right of a third party based on intellectual property rights. That is to say, seller may use the machine that has not itself been patented and use a process which has been patented by a third party. Seller may manufacture the goods which themselves are subject to the third party industrial property rights. Nowadays it is stressed the importance of intellectual property rights such as a patent, brand, and design. These factors consist of the core elements of the competitiveness of the goods. Many embedded software have been used in the various sector. So the disputes regarding to the intellectual property rights is gradually increasing in number. Article 42 of CISG defines the seller's delivery obligations and liabilities in respect to third party intellectual property rights and claims. It contains a special rule for this similar kind of defective in title, which tries to provide an proper solution to the complex problems caused by such rights and claims in international transactions. When seller will apply this clause to the business fields, there are several points to which seller should give attention. First, Intellectual property is general terms in intangible property rights, encompassing both copyright and industrial property. Which matter fall within the scope of intellectual property? The scope of intellectual property can be inferred from the relevant international conventions, which are based on broad international consensus. Second, Article 42 of CISG governs the relationship between the seller and the buyer, that is to say, questions of who has to bear the risk of third party intellectual property rights. The existence of such intellectual property rights, the remedies available and the question of acquiring goods free of an encumbrances in good faith are outside the scope of the CISG. The governing law regarding to the abovementioned matters is needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.84-97
• /
• 2017

Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.280-286
• /
• 2011

In this research, the oil detection method and the characteristic of sensor using the selective reaction of silicone rubber in response to hydrocarbon oil will be described. As a sensing principle, the swelling property of silicone rubber in response to hydrocarbon fuel is used, also a strain gauge is used to transduce the volume change to an electrical signal. The sensor core is manufactured with a strain gauge embedded in silicone rubber by the curing process and experiments for characteristics of sensor core with various oils were carried out. It is shown that the sensor core can be used as an oil spill detection sensor. Also, for the application to the sea area, a buoy type sensor platform is integrated with a sensor core and a strain amplifier and it is tested in the simulated oil spill condition. In this study, it is proven that the integrated sensor can be used for the detection of various oils.

• Advances in nano research
• /
• v.10 no.5
• /
• pp.449-460
• /
• 2021

Flexoelectricity is an interesting materials' property that is more touchable in small scales. This property beside the sandwich structures placed in the center of scientists' attention due to their extraordinary effects on the mechanical properties. Furthermore, in the passage of decades, more elaborated sandwich structures took into consideration results from using honeycomb core. This kind of structure, inspiring from honeycomb core, provides more stiffness to weight ratio, which plays a crucial role in different industries. In this paper, based on the Love-Kirchhoff's hypothesis, Hamilton's principle, modified couple stress theory and Fourier series analytical method, equations of motion for a sandwich plate containing a honeycomb core integrated by two face-sheets have derived and solved analytically. The equations of both face sheets have derived by flexoelectricity consideration. Moreover, it should be noticed that the whole structure rests on the visco-Pasternak foundation. Conducting current research provided an acceptable and throughout study based on flexoelectricity to address the effect of materials' characteristics, length-scale parameter, aspect, and thickness ratios and boundary conditions on the natural frequency of honeycomb sandwich plates. Also, based on the presented figures and tables, there is a close agreement between previous studies and recent work. Due to the high ratio of strength to weight, current model analyzing is capable of taking into account for different vehicles' manufacturing in a high range of industries.

• The Journal of Korean Medicine
• /
• v.25 no.3
• /
• pp.12-19
• /
• 2004

Objectives : In the WIPO conference about the protection of intellectual property for traditional knowledge (TK) and genetic resources (GR), there was a demand concerning the necessity of recognizing the invention of TK and GR and the foundation of a related database. Methods : In the standard of the foundation of a database, the content and resource identification standards, the technological standards and the security and transmission standards were discussed. In a decision on intellectual property, it means the protection and recognition as a technology precedent of the materials of the database. Results : Massive material on traditional medical care technology in Korea has existed in many areas. However, it is hard to make a database because it is difficult to organize and find the data. In addition, a database demanded by WIPO is not only the material of images or texts of simple technology information, but also the use of patent decisions about traditional knowledge technology and the public sharing of information in related areas. A traditional medical care database would consist of the core of a subject and the related areas. The core part is the medical herb resource and Oriental clinical technology. Conclusions : These are necessary to detail the kind of medicines and prescriptions, their use, and their processing. In the related areas, it needs to detail PIAS and clinical data in regarding the industrialization. These DB have to protect the TK and the GR of Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2569-2578
• /
• 2009

Core-A microprocessor is the all-Korean product designed as 32-bit embedded RISC microprocessor developed by KAIST and supported by the Industrial Property Office. This paper analyze Core-A microprocessor architecture and proposes efficient method to interface Core-A microprocessor with coprocessor. To verify proposed interfacing method, the AES cryptography processor that has 128-bit key and block size is used as a coprocessor. Coprocessor and AES are written in Verilog-HDL and verified using Modelsim simulator. It except AES module consists of about 3,743 gates and its maximum operating frequency is about 90Mhz under 0.35um CMOS technology. The proposed coprocessor interface architecture is efficiency to send data or to receive data from Core-A to coprocessor.