• 한국표면공학회지
• /
• 제45권6호
• /
• pp.242-247
• /
• 2012

Yb-doped ITO (ITO:Yb) films were deposited on unheated non-alkali glass substrates by magnetron cosputtering using two cathodes (DC, RF) equipped with the ITO and $Yb_2O_3$ target, respectively. The composition of the ITO:Yb films was controlled by adjusting the RF powers from 0 W to 480 W in 120 W steps with the DC power fixed at 70 W. The ITO:Yb films had a higher crystallization temperature ($200^{\circ}C$) than that of the ITO films ($170^{\circ}C$), which was attributed to both larger ionic radius of $Yb^{3+}$ and higher bond enthalpy of $Yb_2O_3$, compared to ITO. This amorphous ITO:Yb film post-annealed at $170^{\circ}C$ showed a resistivity of $5.52{\times}10^{-4}{\Omega}cm$, indicating that a introduction of Yb increased resistivity of the ITO film. However, these amorphous ITO:Yb films showed a high etching rate, fine pattering property, and a very smooth surface morphology above the crystallization temperature of the amorphous ITO films (about $170^{\circ}C$). The transmittance of all films was >80% in the visible region.

• 한국방재안전학회논문집
• /
• 제5권2호
• /
• pp.11-20
• /
• 2012

최근 집중호우로 인한 산사태, 구미 불산 누출사고 등 국민의 인명과 재산에 막대한 손실을 입히는 중대재난이 계속 발생하고 있지만, 이에 대한 대처가 불충분하여 재난으로부터 안전한 사회에 대한 국민의 요구가 한층 증대되고 있다. 본 논문은 재난관리 전문가 양성을 통한 방재교육역량 강화를 위해 방재부문의 교육 컨텐츠 체계 정립의 핵심기반을 마련함을 목적으로 한다. 이를 위해 우선 수요예측에 의한 교육과정 및 교육과목을 설계하였으며 이를 기초로 하여 재난 현장대비 및 대응 중심의 교육과목을 설계하였다.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.127-139
• /
• 2017

고양 지역의 화강 풍화암 지층을 대상으로 시추조사 및 다양한 현장 시추공 시험(프레셔미터시험, 공내전단시험, Downhole test, Suspension PS 검층, 밀도검층)을 수행하였고, 채취한 풍화암 코어시료에 대한 X선 형광분석을 실시하여 풍화도를 평가하였다. 현장 시추공 시험 결과로부터 변형계수, 전단강도 정수, 전단파 속도 등을 평가하였고, 심도에 따라 각 지반특성 값이 증가하는 경향을 확인하였다. X선 형광분석을 통해 산정한 화학적 풍화지수는 심도에 따라 풍화도가 감소하는 일반적인 경향을 나타냈으며, 대표적 풍화지수인 VR과 풍화암의 지반특성과의 관계를 분석하였다.

• International Journal of Human Ecology
• /
• 제9권2호
• /
• pp.117-126
• /
• 2008

The study identifies gender stereotypes, examines the level of women's economic empowerment at the household level and explores the influence of factors on it. Data were collected from 159 randomly selected farm women using both qualitative and quantitative survey methods between January and March 2007 from three villages of the Mymensingh District of Bangladesh. Four key informants (2 local leaders and 2 development personnel) were questioned to elicit views in the light of boosting women's empowerment. Five constructs of empowerment covering 30 indicators were aggregated together to develop a cumulative economic empowerment index (CEEI) to obtain multidimensional views of women's empowerment. The findings show that there were some prejudices against women in allocating divisions of labour and access to education, food, property, decision-making and institutions. The distribution of the CEEI demonstrates that the majority of the respondents (86%) had a low to moderate level of empowerment. A multiple regression analysis showed positive significant effects of education, training, media contact and freedom of mobility on women's CEEI, while domestic abuse restrained it. It is concluded that interventions by development agencies in co-ordination with the local community was necessary to attain women's self-reliance in the study area. Development actors can undertake some core strategies to enhance women's level of awarencess, knowledge, skills, and productive resources through providing training, loans, and information. To change traditional beliefs, it is important to create awareness of various gender issues amongst rural people through different methods and media.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.64-67
• /
• 2002

The Physical and magnetic properties such as microstructure, permeability and power loss of Ni-Zn ferrite with composition of $Ni_{0.8}Zn_{0.2}Fe_2O_4$, were investigated as the function of $Bi_2O_3$ and CaO contents. The power loss increased in proportion to the amount of $Bi_2O_3$ up to 0.3 wt% but it decreased over than 0.3 wt% addition. The highest permeability of 134 was obtained to the specimen added 1.0 wt% $Bi_2O_3$ since $Bi_2O_3$ contents were strongly dominant to grain growth and size than that of CaO. $Bi_2O_3$ liquid phase created during sintering process promoted sintering and grain growth so that grain size and permeability increased compared to that of the specimens which were sintered with free-additive and CaO. Also, lots of pores existed in the specimen which was added $Bi_2O_3$ wt% with the biggest grain size.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.47-55
• /
• 2001

Violin bridge blank cut from maple wood with good quality has typical pattern of the radial direction in the side edge with minimal dispersion. This experimental study was designed and carried out to examine the effect of the physical and macroscopical characteristics on the compressive creep of violin bridge blank which had been imported from European manufacturer. This research arose from the idea that the maple solid wood with heterogeneous wood density and ray direction in the side edge would have uneven rheological property of violin bridge blank which is supposed to be pressed by the tension of strings. Experimentally, the compressive creep of bridge blank became smaller with the higher density of imported maple wood and showed clear density-dependence for the duration of load under the string tension of 5 kgf. Every bridge blank showed the behavior of primary creep stage(stress stabilization) having logarithmic regression creep curve with high correlation coefficient under the designed stress level. Even though the relationship between compressive creep and ray direction on the side edge of bridge was not so clear contrary to expectation, we could conclude that wood density and ray direction should be the quality decisive factors affecting the acoustical characteristics and performance of the bridge, the core member of violin-family bow instruments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1505-1510
• /
• 2008

A railway is a complex system integrated with a lot of technical elements such as trains, track facilities, human factors, operation & control and maintenance. As a mass transportation system, a railway could contain potential risks that may result in a high death rate and property losses. Accordingly, Railroad Safety Technology R&D Corps. is adopting the plan of the construction of Railway Safety Test Facilities as a part of the Railway Total Safety Project to enhance the railway safety, and carrying out researches on effective project management methods with Systems Engineering techniques. Recently, various systems engineering tools such as CORE or Cradle are applied to manage the system requirements and the project management process in the part of the aerospace engineering and automobile engineering so on. The railway industry also makes an effort to develop an efficient management skills using systems engineering tools as the railway system is multi-disciplinary. Therefore, we propose the more effectual management method of constructing the Railway Safety Test Facilities applying the systems engineering tool to the research.

• 한국광학회지
• /
• 제22권1호
• /
• pp.40-45
• /
• 2011

동일한 주회 길이의 통상적인 DCRR (Double-coupler Ring Resonator) 에 비하여 두 배의 FSR (Free Spectral Range) 성능을 나타낼 수 있는 TCRR (Triple-coupler Ring Resonator: 삼중 결합 링 공진기) 필터의 설계 및 제작에 대하여 논의하였다. 열-광학 특성이 우수하고, 코어-클래딩 굴절률 차가 큰 폴리머 물질을 이용하여 작은 반경의 곡선도파로가 가능한 매립형 도파구조의 컴팩트한 TCRR 필터를 설계 및 제작하였다. 파장가변 레이저와 광섬유 배열 블록을 이용하여 TCRR 필터의 Through 및 Drop 포트 출력 특성을 측정한 결과, DCRR 필터의 두 배인 4.4 nm의 FSR을 확인하였고, 이는 전달행렬 방법을 이용하여 해석한 결과와 거의 동일하였다.

• 한국재료학회지
• /
• 제16권7호
• /
• pp.422-429
• /
• 2006

Studies were performed on preparation of organic-inorganic hybrid silica dye in a dispersing ink system. The silica was subjected to surface modification using 3-aminopropyltrimethoxysilane (APTMS) in order to promote the chemical reactivity of the raw silica. On the surfaces of the aminosilane-functionalised silica, red vinylsulfone-containing azo dye was adsorbed. The dye was found to have chemically reacted with the aminosilane-grafted silica surface, which was proven by FT-IR spectra. Studies on morphology and microstructure were performed employing scanning electron microscopy. The SEM micrographs and particle size distributions showed that a homogeneous pigment can be obtained employing silica as a core. Particle size distribution was also examined using the technique of dynamic light scattering. The ensuing pigment was subjected to various physicochemical evaluation such as inkjet property, storage stability, color change as inkjet ink using printer, spectrophotometric, microscopic techniques. Studies on hybrid dyes from the silica surface demonstrated that, in general, stable pigments for inkjet dispersion ink were obtained.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.359-366
• /
• 2016

Today's multi-core technology rapidly increases with more and more Intellectual Property cores on a single chip. Network-on-Chip (NoC) is an emerging communication network design for SoC. For efficient on-chip communication, routing algorithms plays an important role. This paper proposes a novel multicast routing technique entitled as Docket NoC (Dt-NoC), which eliminates the need of routing tables for faster communication. This technique reduces the latency and computing power of NoC. This work uses a CURVE restriction based algorithm to restrict few CURVES during the communication between source and destination and it prevents the network from deadlock and livelock. Performance evaluation is done by utilizing cycle accurate RTL simulator and by Cadence TSMC 18 nm technology. Experimental results show that the Dt-NoC architecture consumes power approximately 33.75% 27.65% and 24.85% less than Baseline XY, EnA, OEnA architectures respectively. Dt-NoC performs good as compared to other routing algorithms such as baseline XY, EnA, OEnA distributed architecture in terms of latency, power and throughput.