• Asian-Australasian Journal of Animal Sciences
• /
• 제30권1호
• /
• pp.78-84
• /
• 2017

Objective: The aim of this study was to examine shifts in the composition of the bacterial population in the intestinal tracts (ITs) of weaning piglets by antibiotic treatment using high-throughput sequencing. Methods: Sixty 28-d-old weaning piglets were randomly divided into two treatment groups. The Control group was treated with a basal diet without antibiotics. The Antibiotic group's basal diet contained colistin sulfate at a concentration of 20 g per ton and bacitracin zinc at a concentration of 40 g per ton. All of the pigs were fed for 28 days. Then, three pigs were killed, and the luminal contents of the jejunum, ileum, cecum, and colon were collected for DNA extraction and high-throughput sequencing. Results: The results showed that the average daily weight gain of the antibiotic group was significantly greater (p<0.05), and the incidence of diarrhea lower (p>0.05), than the control group. A total of 812,607 valid reads were generated. Thirty-eight operational taxonomic units (OTUs) that were found in all of the samples were defined as core OTUs. Twenty-one phyla were identified, and approximately 90% of the classifiable sequences belonged to the phylum Firmicutes. Forty-two classes were identified. Of the 232 genera identified, nine genera were identified as the core gut microbiome because they existed in all of the tracts. The proportion of the nine core bacteria varied at the different tract sites. A heat map was used to understand how the numbers of the abundant genera shifted between the two treatment groups. Conclusion: At different tract sites the relative abundance of gut microbiota was different. Antibiotics could cause shifts in the microorganism composition and affect the composition of gut microbiota in the different tracts of weaning piglets.

• 한국IT서비스학회지
• /
• 제15권4호
• /
• pp.175-191
• /
• 2016

This paper investigates changing processes of new product development (NPD) systems. In order to continuously develop first-class products, world wide super-class products and hit products, R&D (Research & Development) must be competitive. Firms must achieve competitiveness in terms of quality and cost by launching new products. Most films focus on improving effectiveness and efficiency of NPD process. However, sometimes, they face to the critical challenge of transforming NPD processes entirely reflecting dramatic change of their core products. Transforming of NPD process is difficult in that it involves technological and organizational changes in marketing, R&D, Engineering and manufacturing systems. The purpose of this paper is to shed light on processes and factors affecting successful transformation of new product development systems. We present a case study on the changing processes of S company's NPD process. S company has changed new product development systems successfully from a major IT equipment supplier to an automotive supplier. Empirical results show successful changes of 10 core NPD processes from understanding the market and customers process to after sales process. In case of transformation of NPD, adaption of attribute of business is crucial for success factors in the process innovation. This paper shows the bridging the gap between IT and automotive industrial dynamics and growth through adaption of two processes in the NPD.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제3권1호
• /
• pp.41-58
• /
• 2003

Recently, the reliability evaluation and analysis are applied for many industrial products, and many products are required to guarantee in quality and in efficiency. The purpose of this paper is to present some of reliability prediction methodologies that are applicable to machine tools. Especially ATC (Automatic Tool Changer) and Interface Card of PC-NC, which are core components of the machine tools, were chosen as the target of the reliability evaluation and analysis. The results of this research has shown the failure rate, MTBF(Mean Time Between Failure), and reliability for those components. It is expected that proposed methodologies will be applicable to evaluation of reliability for other industrial products.

• 미생물학회지
• /
• 제29권4호
• /
• pp.221-225
• /
• 1991

The RNA transcripts produced from in vitro transcription reaction of BTV core were analyzed on agarose-urea gel. Fast migrating abortive RNAs, in addition to full length species of RNA, were observed. Fast migrating RNAs extracted from agarose-urea gel were hybridized to all 10 segments of genomic ds RNA, while solw migrating RNAs extracted from agarose-urea gel were hybridized only to the large and medium size genomic ds RNA. These results indicate that fast migrating RNA transcripts are most likely the products of abortive transcription.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.275-278
• /
• 2005

The dynamic characteristics of rotor shafts for electric motors were investigated through the modal tests. The natural frequencies and modal dampings in each manufacturing stage of rotor core assembly were analyzed from the frequency response functions fer all 6 motors of a product model. The deviation of the each individual modal feature was found dependent on the mode shapes as well as the rotor assembly stage. The core stacking itself is known to widen the deviation of modal properties but fellowing processes of rotor bar insertion and swaging are confirmed to reduce the deviation. Finally the equivalent diameter of core part was estimated from the comparison of measured and calculated results to include the stiffness of core part.

• KDI Journal of Economic Policy
• /
• 제32권3호
• /
• pp.1-32
• /
• 2010

본고에서는 글로벌 금융위기의 충격을 산출량에 장기적 중립성을 가지는 근원적 충격과 장기적 중립성을 가지지 않는 비근원적 충격으로 나누어 글로벌 금융위기 기간 중 근원적 충격이 물가안정목표 달성에 미친 영향을 분석하였다. 본고에서 보인 바와 같이 글로벌 금융위기가 수요에 미친 영향과 이로 인해 물가가 안정된 효과를 제대로 파악하지 못하면 향후 물가안정이 어려워질 수 있다. 농산물과 석유류 제품의 일시적 공급충격을 제거한 통상적 근원인플레이션을 기준으로 평가하면, 2007~09년 중 물가안정목표는 안정적으로 달성된 것처럼 보이고 향후 목표 달성도 무난해 보인다. 그러나 중앙은행의 통제 대상인 구조적 근원인플레이션을 기준으로 평가하면 매우 달라진다. 글로벌 금융위기를 전후한 수요충격으로 근원인플레이션이 크게 변동하였으며, 2007~09년 중 물가안정목표 달성은 글로벌 금융위기에 따른 마이너스 성장에 기인한 바가 크다. 또한 글로벌 금융위기 이후 각종 경기확대정책에 힘입어 경기가 빠르게 회복되면서 근원인플레이션이 급격하게 상승하고 있으므로 향후 적절한 출구전략을 마련해야 한다.

• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.491-499
• /
• 2011

The objective of this study was to develop the export strategic core technologies for IT fusion next generation agricultural machines by the analysis of comprehensive and cooperative systems of industries, universities, and institutes. In order to achieve the objective of this study, an expert panel was formed and operated. The first survey was conducted by the Delphi method. For this the export strategic core technologies were surveyed and analyzed using the questionnaire. Based on the results of the first survey, the second survey was conducted. The questionnaire used for the second survey was designed by results of the first survey. The results of the second survey was analyzed by AHP method. The third survey was conducted based on the second one, and the final results were analyzed and the export strategic core technologies were developed through the expert meeting. The study results showed six export strategic core technologies as the followings : 1) environment-friendly engine technology for high performance 2) high performance/high efficiency power transmission system technology 3) development of measurement system technology for safety of agricultural products 4) field application of sensor networks 5) large size combine development technology for high performance 6) quality evaluation technology for agricultural products.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.1-8
• /
• 2004

생장속도가 빨라서 단위면적당 Biomass의 생산량이 많은 어저귀(Indian mallow, Abutilon avicennae G.)를 원료로 하여 펄프화하였으며, 제조한 한지의 물리적·기계적·현미경적 특성에 관하여 비교 검토하였다. 제조한 한지의 특성을 살펴보면 광학적, 강도적, 현미경적인 특성에서 설포메틸 펄프화법이 우수한 결과를 나타냈고, 장섬유인 인피부 펄프에 대한 단섬유인 목질부 펄프의 혼입량 증가에 따른 변화에 있어 지질(밀도, 백색도, 불투명도, 지합)의 변화는 점차 증가했으나, 강도는 감소하는 경향을 나타냈다.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.9-13
• /
• 2015

The HEV/EV Traction Motor Core manufacturing technology is a core component of Traction Motor Core is a key technology for the manufacture of eco-friendly automotive industry is essential for the competitiveness of the country must obtain the technology. This study was performed to develop a Rotor Core of the HEV/EV Traction Motor using the first time in Korea multi-gate BMC injection molding technique. Executed by the experiment of this study are as follows. Study 1: Developed a multi-gate BMC injection mold for the magnet fixed to the Rotor Core. Study 2: Developed a production implementation and manufacturing technology of the Rotor Core. In this study, the develop products and manufacturing technologies implemented by the BMC injection mold development for Magnet fixed to the Rotor Core and the results are discussed.

• 한국경영과학회지
• /
• 제38권2호
• /
• pp.43-63
• /
• 2013

Remanufacturing is a process of recovering end-of-life products into serviceable parts for producing new products. Due to the limited supply of recovery cores to remanufacture, a remanufacturing firm also needs to produce or procure new parts for fulfilling the demand. This paper is targeted for solving the problem of determining the optimal amount of newly produced and remanufacturing parts, which is called production and remanufacturing planning (PRP) problem, under uncertain supply of recovery cores. The new production mitigates the risk of insufficient core supply while it takes more costs than the remanufacturing. The PRP model in this paper also considers disassemble-to-order (DTO) environment, in which multiple kinds of parts are remanufactured from multiple products on order of the parts. Whereas existing studies presents only heuristic solutions for DTO remanufacturing, this paper provides an exact solution for this problem and analytical sensitivity of the involved cost parameters, adopting multi-dimensional newsvendor modeling and stochastic linear programming techniques. The result shows that production and remanufacturing plans for multiple products are mutually dependent, and a change of cost parameters involved in only one part is propagated to all other parts.