• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2252-2263
• /
• 1993

The purpose of this study is to verify the vibration and damping characteristics of elastic-viscoelastic-elastic structures, theoretically and experimentally. The forth-order differential equations of motion are derived for the transverse vibration of three-layered plates with viscoelastic core layer. The equations consider both transverse displacements of the constraining layer and the bare base plate as variable and account for the effect of the transverse normal strain and the shear strain of viscoelastic core layer on the vibration of the plates. Finite difference analysis of the equations and experimental measurements are performed on the three-layered plates of completely free boundary condition. Comparative investigations on the theory and the results of direct frequency analysis of NASTRAN are carried out on the same structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.98-100
• /
• 2005

This paper, proposes concept of personal robot middleware core also called streaming layer. Based on openness and portability, the streaming layer is proposed in order to meet requirements of different kinds of applications. The streaming layer architecture provides effective management of data flows and allows integration of different systems with ease regardless software of hardware platform. With extensibility support additional features can be build in without affect to performance. Therefore, heterogeneous network support, real-time communications, embedded boards support can be easily achieved. In order to achieve high performance together with portability into different platforms, the most functions has to be implemented in C language, while critical parts, such as scheduling, priority assignment has to be made using native functions of tested platforms.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1129-1134
• /
• 2015

In this article, a study of a flower like nanostructured CdS buffer layer for improving the performance of a submicron-thick $CuIn_{1-x}Ga_xSe_2$ (CIGS) solar cell (SC) is presented. Both its synthesis and properties are discussed in detail. The surface reflectance of the device is dramatically decreased. SCs with flower like nanostructured CdS buffer layers enhance short-circuit current density, fill factor, and open-circuit voltage. These enhancements contribute to an increase in power conversion efficiency of about 55% on average compared to SCs that don't have a flower like nanostructured CdS buffer layer, despite them both having the same CIGS light absorbing layer.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.554-565
• /
• 2012

In this paper, we study a cross-layer and end-to-end optimization problem for the integrated wireless and wireline network that consists of one wireline core network and multiple wireless access networks. We consider joint end-to-end flow control/distribution at the transport and network layers and opportunistic scheduling at the data link and physical layers. We formulate a single stochastic optimization problem and solve it by using a dual approach and a stochastic sub-gradient algorithm. The developed algorithm can be implemented in a distributed way, vertically among communication layers and horizontally among all entities in the network, clearly showing what should be done at each layer and each entity and what parameters should be exchanged between layers and between entities. Numerical results show that our cross-layer and end-to-end optimization approach provides more efficient resource allocation than the conventional layered and separated optimization approach.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1630-1635
• /
• 2005

The microstructure of the parts made by the microcellular injection molding process influence properties, including impact strength, tensile strength and density of material. Microstructure of microcellular plastics is divided into core foaming region and solid skin region. Core foaming region is influenced by pressure drop rate, viscosity and cell coalescence. However, actual mechanism of the skin layers is not known despite its importance. The study on the skin layer is getting important because foaming rate of the plastics is determined by the thickness ratio of the skin layer. Especially in case of large molded part, control of the skin layer is needed because skin layer thickness is changed largely. Therefore it is necessary to study variation in skin layer thickness with processing parameters. In this paper, the influence of temperatures in the mold cavity on the skin layer s thickness was also addressed. In addition, the relationship between the temperature distributions across cavity of the mold with impact strength on parts made with the microcellular injection molding process was addressed. In addition, the method to predict the variation in skin layer thickness with mold temperature is discussed.

• Composites Research
• /
• 제18권1호
• /
• pp.30-37
• /
• 2005

본 연구에서는 3점 굽힘 실험과 코어의 실제 형상을 모델링한 유한요소 시뮬레이션을 병행하여 외피층의 항복, 층간분리 코어의 전단 및 국부적 좌굴과 같은 다양한 파손모드를 고려한 하니컴 샌드위치 복합재료의 강도 특성과 변형거동을 검토하였다. 외피층과 하니컴 코어층 사이를 완전 접착한 시험편과 부분 층간분리 시험편을 대상으로 하니컴 코어의 셀 크기와 외피층 두께를 변화시켜 시험편의 굽힘 강성, 굽힘 강도. 굽힘 응력, 변형 및 파손 거동을 해석하였다. 결론적으로 하니컴 코어의 셀 크기와 외피층의 두께가 하니컴 샌드위치 복합재료의 굽힘 강성과 강도, 변형/파괴 거동에 주된 영향을 미쳤으며 코어의 셀 크기가 크고 외피층의 두께가 얇은 경우 굽힘 강도는 $30\~68\%$ 정도까지 저하됨을 알 수 있었다.

• Composites Research
• /
• 제17권5호
• /
• pp.15-24
• /
• 2004

유리 섬유 강화 플라스틱 직교적층판의 내부층과 표피층의 길이방향 변형률을 삽입된 절대변형 외부 페브리 페로 간섭 센서를 이용하여 측정하였다. 투과식 광학현미경을 이용하여 삽입된 A-EFPI 센서 주위의 파손거동을 관찰하였다. 시험편 표면부의 변형률 측정을 위해 포일 형식의 스트레인 게이지를 시험편 아래 위 표면부에 부착하였다. 또한 삽입된 A-EFPI 센서로 측정한 내부층과 표피층의 길이방향 변형률 값은 스트레인 게이지로 측정한 시험편 표면의 변형률 값 보다 다소 크게 나타났다. 균일 응력 모델을 기초로 한 3차원 유한요소해석을 통해 실험 결과의 타당성을 확인하였으며 내부층의 큰 변형률은 많은 횡단형 균열의 발생을 야기시켰는데 이로 인해 내부층에 삽입된 광섬유센서의 고장시 변형률이 급격히 낮아졌다.

• 한국광학회지
• /
• 제14권4호
• /
• pp.359-364
• /
• 2003

편광에 따른 성능 변화가 작은 deep-ridge 도파관 구조에 제작이 용이한 double-sided 프로세스를 이용하여 구현할 수 있는 편광에 무관한 매우 짧은 결합 길이를 가지는 double-sided deep-ridge 도파관 구조를 가지는 새로운 수직 방향성 결합기를 제안하고 여러 가지 구조 파라미터들이 결합길이에 미치는 영향에 대하여 연구하였다. 도파관 폭의 변화에 대한 결합길이의 변화는 코어 두께의 변화에 대한 결합길이의 변화보다 작게 나타나는 것을 볼 수 있었다. 내부 클래딩 영역의 두께가 감소할수록, 코어 두께가 감소할수록 결합 길이가 감소함을 볼 수 있었다. 또한 같은 코어 두께에 대해서는 내부 클래딩 영역의 두께가 감소할수록, 같은 내부 클래딩 영역의 두께에 대해서는 코어 두께가 감소할수록 편광에 관계없이 결합 길이가 같아지는 도파관 폭이 작아짐을 볼 수 있었다.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.349-358
• /
• 1988

본 연구에서는 낮은 종횡비의 직각밀폐용기의 경계층흐름영역에 대하여 Lee에 의해 공식적인 수학적 방법으로 얻어진 코어방정식을 기초로 코어흐름 형상을 근사해석으로 구하였으며 그 결과를 다른 연구자들의 결과와 비교, 검토하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.