• Title/Summary/Keyword: core group

Search Result 1,454, Processing Time 0.027 seconds

FRACTURE STRENGTHS OF CEROMER CROWNS SUPPORTED ON THE VARIOUS ABUTMENT CORE MATERIALS

  • Kim Young-Oh;Ku Chul-Whoi;Park Young-Jun;Yang Hong-So
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.42 no.6
    • /
    • pp.647-653
    • /
    • 2004
  • Statement of problem. The effects of various core buildup materials which differs in the mechanical properties on the fracture strength of metal-free crowns is unknown. Purpose. This study was carried out to evaluate the fracture strengths of Artglass ceromer crowns supported by 3 different core materials in clinically simulated anterior tooth preparation. Material and methods. Ten crowns from each group were constructed to comparable dimensions on the various dies made by gold alloy, Ni-Cr alloy, and composite resin. The ten crowns were then cemented onto the dies and loaded until catastrophic failure took place. Fracture resistance to forces applied to the incisal edges of the anterior crowns supported by three types of dies was tested. Results. The ceromer crowns on the composite resin dies fractured at significantly lower values(287.7 N) than the ceromer crowns on the metal dies(approximately 518.4 N). No significant difference was found between the fracture values of the ceromer crowns on the dies of gold alloy and Ni-Cr alloy. Conclusion. The failure loads of the ceromer crowns on the metal dies were almost the same and not affected by the differences of casting alloys. However, the fracture values of the ceromer crowns on the resin dies were significantly reduced by the relative weak properties of composite resin core material.

A Research on the Core Functions and Management Level of the PMO to Improve IS Project Performance (정보시스템 개발 프로젝트 성과 향상을 위한 PMO 핵심 기능과 관리수준에 관한 연구: 금융권 차세대 프로젝트 사례를 중심으로)

  • Kim, Sang-Yeoul;Chang, Yun-Hi
    • The Journal of Information Systems
    • /
    • v.15 no.4
    • /
    • pp.1-22
    • /
    • 2006
  • Nowadays, IS projects are getting more complicated and large-scaled. Therefore, many researchers and practitioners have been interested in the IS development methodologies, automated tools, techniques, and TQM to improve IS performance. Latest Standish Group's research reported that after the PMO introduction, project scale became bulkier than 1 or 2 year ago, and that IS development project success probability was increased sharply by 62 percents from 37. The previous researches listed just various PMO functions. This research is to seize the core functions and management level of the PMO affecting on the IS project performance with banks which are the leading industry to accept the PMO in Korea. The activities in the categories of implementation management technology support management infrastructure management are the core functions of the PMO to affect the IS performance including schedule management quality management user and stakeholders' satisfaction. Also, the PMO management level is important for IS project success. Among the 5 levels PMI suggested, PMO can implement the project effectively at least at the third level. Korean companies which are about to introduce the PMO have to consider the PMO core functions and management level to increase the IS maturity.

  • PDF

PCM/Nylon6 복합사 염착특성

  • Lee, Jun-Hee;Kim, Hyung-Joo;Yim, Sang-Hyun;Im, Jung-Nam;Son, Young-A
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.11a
    • /
    • pp.35-35
    • /
    • 2011
  • Phase change material(PCM) has thermal energy storage and been attracted attention. Latent heat of the organic PCM can keep maintaining temperature when the change of outside energy conditions influence to PCM. Thus, many researchers have interested to thermal energy storage ability and investigated to applications such as thermal storage of solar energy, bioclimatic building, icebank, medical application, clothing industry and so on. Among the many applications, investigation of the PCM in clothing industry is also important because the people has interest functional factor called health-care in the clothing. In addition, PCM can give them mild environment condition such suitable temperature control or humidity. To fabrics, the PCM has various methods such as microcapsule, padding and modified cross-section formation(Sheath/core). Sheath core PCM fabric has a better benefit of durability than other method. However, PCM sheath/core spinning is difficult. In addition, dyeing property is important to use clothing industry due to visual images. In this study, we investigated dyeing properties of Nylon/PCM sheath/core fabrics. Especially, we observed the relation between dyeing property and PCM including ratio. Various temperature and pH conditions were also studied to optimize dyeing properties as acid dye.

  • PDF

Development of µ-PIM standard mold with exchangable insert core in order to manufacture micro pattern (마이크로 패턴 성형을 위한 인서트 코어 적용 µ-PIM 표준금형 개발에 관한 연구)

  • Park, Chi Yoel;Seo, Chan-Yoel;Kim, Yongdae
    • Design & Manufacturing
    • /
    • v.11 no.3
    • /
    • pp.29-34
    • /
    • 2017
  • Increased demand for parts with micro-pattern structure made of metals, ceramics, and composites in various fields such as medical ultrasonic sensors, CT collimators, and ultra-small actuator parts. Micro powder injection molding (PIM) is a technology for manufacturing micro size, high volume, complex, precision, net-shape components from either metal or ceramic powder. In the present study, a standard mold with a variable insert core capable of producing various micro patterns was investigated. An injection molding test was performed on a standard mold using a line type micro-pattern core having an aspect ratio of 2, a slenderness ratio of 70, a pattern size of $200{\mu}m$, and a pattern spacing of $150{\mu}m$. During the filling process, the deformation of the mold with large aspect ratio and slenderness ratio was analyzed by the experiment and the numerical simulation according to the position of the gate. We proposed a mold structure that minimizes mold deformation by gate modification and enables uniform pattern filling behavior.

A Study of the Effects of the Internal Characteristics of Fashion Brand Salespeople on Core Sales Tasks (패션브랜드 판매원의 내적특성이 판매 중심직무에 미치는 영향에 관한 연구)

  • Oh, Hyun-Jeong
    • Human Ecology Research
    • /
    • v.59 no.3
    • /
    • pp.311-324
    • /
    • 2021
  • The purpose of this study was to reveal the effects of internal characteristics, such as fashion involvement, personality characteristics, and customer orientation of fashion brand salespeople on the core sales tasks, and how the core sales tasks and internal characteristics differ depending on differences in the way salespeople are remunerated. The data were collected as a questionnaire to fashion brand salespeople in Gwangju from September to October 2020. Using 235 responses, the data were analyzed with SPSS 21.0 for frequency analysis, reliability analysis, t-test, factor analysis, and regression analysis. The research results were as follows. First, fashion involvement comprises factors such as 'fashion passion and sense'and 'fashion trend interest', and the greater the 'fashion passion and sense', the better the 'sales management'and 'customer relationship management'jobs. Second, 'esthetic openness', 'responsibility' and 'extroversion' of the big five personality characteristics have a positive impact on 'sales management' and 'customer relationship management' tasks. Third, customer orientation comprises factors such as 'customer-centric understanding'and 'gain customer trust', the greater the customer-orientation, the better the 'sales management'and 'customer relationship management'tasks. Fourth, according to the position of the salesperson, the group of professional salespeople at manager level had high responses in core sales tasks, fashion involvement, customer orientation, and characteristics such as 'agreeableness', 'esthetic openness', and 'responsibility'.

Static and transient analyses of Advanced Power Reactor 1400 (APR1400) initial core using open-source nodal core simulator KOMODO

  • Alnaqbi, Jwaher;Hartanto, Donny;Alnuaimi, Reem;Imron, Muhammad;Gillette, Victor
    • Nuclear Engineering and Technology
    • /
    • v.54 no.2
    • /
    • pp.764-769
    • /
    • 2022
  • The United Arab Emirates is currently building and operating four units of the APR-1400 developed by a South Korean vendor, Korea Electric Power Corporation (KEPCO). This paper attempts to perform APR-1400 reactor core analysis by using the well-known two-step method. The two-step method was applied to the APR-1400 first cycle using the open-source nodal diffusion code, KOMODO. In this study, the group constants were generated using CASMO-4 fuel transport lattice code. The simulation was performed in Hot Zero Power (HZP) at steady-state and transient conditions. Some typical parameters necessary for the Nuclear Design Report (NDR) were evaluated in this paper, such as effective neutron multiplication factor, control rod worth, and critical boron concentration for steady-state analysis. Other parameters such as reactivity insertion, power, and fuel temperature changes during the Reactivity Insertion Accident (RIA) simulation were evaluated as well. The results from KOMODO were verified using PARCS and SIMULATE-3 nodal core simulators. It was found that KOMODO gives an excellent agreement.

Application of automatic few-group structure optimization based on perturbation theory to VHTR cores

  • Tae Young Han;Hyun Chul Lee
    • Nuclear Engineering and Technology
    • /
    • v.56 no.10
    • /
    • pp.4042-4049
    • /
    • 2024
  • A new automatic group structure optimization method based on the perturbation theory was proposed for the few-group structure in two-step nuclear design procedure for VHTR. It applies the sensitivity coefficient of the perturbation theory which includes not only the effect of the cross section on the multiplication factor but also the adjoint weighted reaction rate. The sensitivity coefficient of the fine group for the multiplication factor was calculated and the group boundary for a few-group can be determined so that the summation of the fine group sensitivity for a few-group should be evenly distributed over every few-group. This method was successfully implemented in the ABGO code. VHTR-350 and MiHTR 2D core were used to investigate the performance and applicability of the proposed method. The code generated the new group structures for two cores and the error of the multiplication and reaction rate by the new group structure was compared with the result by the fine group structure. The comparisons indicate that the new group structure by the proposed method can provide the multiplication factor and reaction rates comparable to the existing group structure and more accurate results than the group structure obtained using the Contributon theory.

Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics

  • Mosharraf, Ramin;Rismanchian, Mansour;Savabi, Omid;Ashtiani, Alireza Hashemi
    • The Journal of Advanced Prosthodontics
    • /
    • v.3 no.4
    • /
    • pp.221-228
    • /
    • 2011
  • PURPOSE. Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white or colored) on shear bond strength (SBS) of zirconia core and its veneering porcelain. MATERIALS AND METHODS. Eighty zirconia disks (40 white and 40 colored; 10 mm in diameter and 4 mm thick) were treated with three different mechanical surface conditioning methods (Sandblasting with $110{\mu}m$ $Al_2O_3$ particle, grinding, sandblasting and liner application). One group had received no treatment. These disks were veneered with 3 mm thick and 5 mm diameter Cercon Ceram Kiss porcelain and SBS test was conducted (cross-head speed = 1 mm/min). Two and one way ANOVA, Tukey's HSD Past hoc, and T- test were selected to analyzed the data (${\alpha}=0.05$). RESULTS. In this study, the factor of different types of zirconia ceramics (P=.462) had no significant effect on SBS, but the factors of different surface modification techniques (P=.005) and interaction effect (P=.018) had a significant effect on SBS. Within colored zirconia group, there were no significant differences in mean SBS among the four surface treatment subgroups (P=0.183). Within white zirconia group, "Ground group" exhibited a significantly lower SBS value than "as milled" or control (P=0.001) and liner (P=.05) groups. CONCLUSION. Type of zirconia did not have any effect on bond strength between zirconia core and veneer ceramic. Surface treatment had different effects on the SBS of the different zirconia types and grinding dramatically decreased the SBS of white zirconia- porcelain.

A Study on the Analysis of the Configuration and Properties of University Campus Cores through Space Syntax (공간구문론을 이용한 대학교 캠퍼스 코어의 공간구조 유형 및 특성 분석)

  • Lee, Dong-Joo;Ko, Eun-Hyung
    • Journal of the Korean Institute of Educational Facilities
    • /
    • v.16 no.6
    • /
    • pp.13-20
    • /
    • 2009
  • The purpose of this study is to analyze the configuration and properties of university campus cores for systematic approach and planning through space syntax based on master plans of 55 universities in Korea. The results of this study showed that: first, the campus cores were classified into 10 types through axial map analysis. They were '一 type', '二 type', 'ㄱ type', 'T type', '+ type', 'radiation type', 'grid type', 'polygon type', 'tree structure type' and 'combination type'.(table 7) The frequency of '一 type' was the highest by 27.2%, and 'radiation type' was the next by 14.5%; second, the integration value was 2.03(+ type), te90(grid type), te75(ㄱ type), te74(一 type), te67(二 type), te63(T type), te46(polygon type), te347(tree structure type) and te343(radiation type).(table 9) We could categorize the 'radiation type' and the 'tree structure type' as the first group, the 'polygon type' as the second group, the 'T type', the '二 type', the '一 type', and the 'ㄱ type' as the third group, the 'grid type' as the fourth group, the '+ type' as the fifth group; third, cases that the integration value of access road was very low(58.2%) was much more frequent than that of very high(32.7%); fourth, the most important space in the campus core were as follows: library and media center(18.1%), administration buildings and headquarters(15.7%), student center(15.7%), lecturing building(13.9%), streets and squares(13.3%).

Corporate Brand Management of SK

  • Lee, Jinyong
    • Asia Marketing Journal
    • /
    • v.20 no.1
    • /
    • pp.23-48
    • /
    • 2018
  • SK group has been a pioneer in overall brand management and, more recently, in CSR-imbedded brand management. SK vision of "improving itself to give greater happiness to all of its customers" and the symbol mark of "Wings of Happiness" are some good examples of integrating distinct brand identities of various member companies. After impressive growth and expansions into diverse business areas, SK group is ranked as the third largest company based on asset amounts according to the Fair Trade Commission of Korea, only after Samsung and Hyundai Motor groups. SK brand management can be analyzed, using the framework of 4 stages - 'infrastructure', 'planning', 'doing', and 'seeing' stages. In order to secure 'infrastructure' of brand management system, SK has invested huge resources to the 'SK BMS' (SK Brand Management System). At the 'planning' stage, the most important task of SK like other Korean business groups is perhaps to adopt a well-organized 'brand identity (BI) system' which may consolidate brand values of individual member companies. In actuality, SK BI consists of Customer Happiness located at the center and 3 other elements of Pride, Professionalism, and Customer-orientation. At the 'doing' stage, the slogan of 'OK! SK' and the logo of 'Wings of Happiness' have been placed at the core of the SK group brand building programs. SK adopts the principle of 'independent yet united', pinpointing that each member company independently works for its business performance but it is, at the same time, encouraged to integrate its capabilities for the SK group brand. In addition, SK has sought 'shared growth' with business partners for happiness for all the members in the society. 'Social Contribution Philosophy' based on SK value of 'creation of greater happiness' is again one of the most important guidelines for CSR (corporate social responsibility) at the doing stage. At the seeing stage, SK regularly evaluates its branding programs. SK has shown some very impressive achievements in brand management: (1) a core identity of 'Customer Happiness' participating member companies may share, (2) harmonious relationships between the group brand management office and brand management divisions of member companies, and (3) consistency-keeping in brand management over time. However, there remain two major challenges: (1) globalization of SK and (2) reinforcing sustainable superiority over not only Korean rivals but also global ones.