• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.46-55
• /
• 2002

10mo1% Gd$_2$O$_3$ doped CeO$_2$ fine powders were synthesized by the oxalate coprecipitation method. The characteristics and sintering behavior of fine powders were investigated. The oxalate precipitates had the specific surface area of 150$m^2$/g, and appeared to be fine and spherical primary particles with a size of approximately 5.5nm. The decomposition of the precipitates occurred from a temperature around 30$0^{\circ}C$ and it was completed below 40$0^{\circ}C$, resulted in the formation of the oxide. The calcination temperature of the fine powders was suitable at 77$0^{\circ}C$. By introducing fine powders washed with alcohol and ball-milling process after calcination, the sintered body was possible to attain the value of 97% of the theoretical density at low temperature of 130$0^{\circ}C$

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.51-56
• /
• 2019

LuAG:Ce(Lu₃Al₅O₁₂:Ce³⁺) nano phosphor were synthesized by applying the coprecipitation method. It is used to increase the color rendering of phosphor ceramic plate for high power LEDs and laser lighting. Internal quantum efficiency and absorption of LuAG:Ce nano phosphor are 51.5 % and 64.4 %, respectively, which is higher than the previously studied nano phosphors. The maximum absorption wavelength of this phosphor is 450 nm blue light, and the emission wavelength is 510 nm. The emission wavelength shifted to longer wavelength when the concentration of Ce increased in the heat treatment of the reducing atmosphere. Thermal quenching of LuAG nano phosphor was 70 % at 200 ℃, it was explained by their significant quenching of all raman scattering modes, implying the restriction of electron-phonon couplings caused by their defects.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.879-885
• /
• 1994

Coprecipitation technique was used to synthesize ZrO2+12 mol% CeO2 powders with ZrOCl2.8H2O and Ce(NO3)3.6H2O as starting materials. The powders were dried on different conditions such as distilled water, ethanol, and azeotropic distillation. The powders prepared by azeotropic distillation showed weak aggregation of particles and the average particle size of powders calcined at 85$0^{\circ}C$ for 1 hour was 0.19 ${\mu}{\textrm}{m}$. The optimum sintering temperature and holding time are 130$0^{\circ}C$ and 2.5~10 hours, respectively. Beyond the optimum conditions, a phase transition from tetragonal to monoclinic causes to produce cracks in the sintered bodies and to decrease the density.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.655-660
• /
• 1989

The physical properties and sinterabilities of ZrO2-Y2O3-Bi2O3 ternary system powder prepared by coprecipitation were investigated. The crystallization temperatures of ternary system were increased and the specific surface areas were decreased with increasing Bi2O3 amount as sintering agents both PSZ and FSZ. Especially, the partially stabilized zirconia showed monoclinic phase. The sinterability was increased with the amount of Bi2O3 added which caused liquid phase sintering.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.467-471
• /
• 2004

In order to fabricate a high density sintered body of ITO, nano-sized ITO powders were synthesized by coprecipitation methods. Aqueous solutions of indium and tin salts were mixed and coprecipitated by changing their pH. Coprecipitated ITO powders possessed 20-30 nm crystallite size and a relatively high BET value ($35m^2/g$), however, aggregation of particles were occurred. Therefore, a novel recrystallization technique was applied in order to eliminate the aggregates. The recrystallized ITO material consists of a little bit larger needlelike crystals, $20nm{\times}80nm$, and it possesses a higher BET value $(57m^{2}/g)$ compared to the plain coprecipitated material $(35m^{2}/g)$. Metastable phase formation and higher content of aggregated particles were observed in the coprecipitated materials. Densification was 95% to 98% complete after 5 hour sintering at $1500^{\circ}C$ for the recrystallized powders while densities of the coprecipitated powders were below 75%.

• Journal of Pharmaceutical Investigation
• /
• v.15 no.1
• /
• pp.15-21
• /
• 1985

The inclusion of ${\alpha}-cyclodextrin$ and ${\beta}-cyclodextrin$ with flurbiprofen in aqueous phase was investigated by UV absorption and circular dichroism spectroscopies. The inclusion complex in solid powder form were made by the freeze-drying and coprecipitation methods in molar ratio 1:1. The inclusion complex formation was confirmed by infrared absorption spectroscopy. The freeze-drying method was successful in obtaining the inclusion compounds compared with the coprecipitation method. The dissolution of solid flurbiprofen inclusion complex was examined in comparison with those of flurbiprofen alone. The inclusion complex obtained by freeze-drying method increased the dissolution rate.

• Journal of the Korean Ceramic Society
• /
• v.16 no.2
• /
• pp.89-98
• /
• 1979

In order to prepare ferroxplana ZnY $(Ba_2Zn_2Fe_{12}O_{22})$, which would be useful for GHz-band communication, the optimum coprecipitation condition of 1 $BaCl_{2-1} Zn(NO_3)_2-6FeCl_3$ in $NaOH-Na_2CO_3$ solution was investigated by use of a new apparatus invented in our laboratory. By freeze-drying and calcining the coprecitated hydroxide-carbonate, the very reactive powder was obtained, from which the synthesis process of ZnY and the other related crystals were investigated by means of X-ray diffraction. In results, it was found that the reactive powder containing ZnY as the major component can be prepared by this method, which may be used in manufacturing the various magnetic cores for the microwave communication.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.327-331
• /
• 1996

$\delta$-FeOOH was prepared by rapid oxidation method of Fe(OH)2 using H2O2. The effects of reaction temperature and mole ratio ([OH-]/[Fe2+])의 몰비를 제조 변수로 하여 최종 생성된 $\delta$-FeOOH의 입자크기 입자형태, 자기특성을 조사하였다. Fe(OH)2 의 반응온도 및 [OH-]/[Fe2+] 비가 $\delta$-FeOOH의 입자크기 및 형상에 많은 영향을 미침을 알수 있었으며 입자 크기는 이 두인자에 비례하여 증가하였다 Fe(OH)2 의 반응온도가 4$0^{\circ}C$ [OH-]/[Fe2+]=5 Fe(OH)2 숙성 시간 2시간에서 제조된 $\delta$-FeOOH를 TEM, VSM으로 입자의 크기 및 자기특성을 조사한결과 평균 입경이 630$\AA$ 정도이고 입도 분포가 양호하였으며 포화자화 및 보자력은 각각 20.8emu/g 210 Oe였다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.559-563
• /
• 2000

To decompose carbon dioxide, magnetite was synthesized with 0.2M-FeSO4$.$7H2O and 0.5 M-NaOH by coprecipitation. The deoxidized magnetite was prepared from the magnetite by hydrogen reduction for 1, 1.5, 2 hr. The degree of hydrogen reduction and the decomposition rate of carbon dioxide were investigated with hydrogen reduction time. The crystal structure of the magnetite was identified spinel structute by the X-ray powder diffractions. After magnetite was reduced by hydrogen, magnetite reduced by hydrogen become new phae(${\alpha}$-Fe2O3, ${\alpha}$-Fe) and spinel type simultaneously. After decomposing of carbon dioxide at 350$^{\circ}C$, new phse(${\alpha}$-Fe2O3, ${\alpha}$-Fe) were removed and the spinel type only existed. The specific surface area of the synthesized magnetite was 46.69㎡/g. With the increase of the hydrogen reduction time, the grain size, the hydrogen reduction degree and the decomposition rate of carbon dioxide was increased.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.146-152
• /
• 1991

Ultra fine and homogeneous (Ni0.4Zn0.6)Fe2O4 ferrite powders were prepared by direct-wet, Hydrothermal and coprecipitation methods. In case that specific surface areas of Ni-Zn ferrite powders were over 220㎡/g, 100㎡/g, 30㎡/g individually direct-wet, hydrothermal and coprecipitation methods. The Ni-Zn ferrite magnetic fluids of which Solvents were benzene or kerosene was prepared by making cation surfactant adsorbed on the surface of the (Ni0.4Zn0.6)Fe2O4. The results that measured dispersion and viscosity by making cation surfactant adsorbed were as follows. 1. The adsorption amount of Oleric acid be proportioned the specific surface area of powders. 2. The maximum amount of Oleric acid was 36wt% of dried powders which has 220㎡/g of specific surface area. 3. The stability of fluid by direct-wet synthesis emthod in benzene or kerosene solvent excellent.