• 제목/요약/키워드: coplanar coupled line

검색결과 15건 처리시간 0.031초

TE01δ 모드 유전체 공진기와 코플래나 웨이브가이드 구조들과의 결합 특성 연구 (Study on Coupling Characteristics between TE01δ Mode Dielectric Resonator and Coplanar Waveguide Structure)

  • 김종혁;김인석
    • 한국항행학회논문지
    • /
    • 제9권2호
    • /
    • pp.147-155
    • /
    • 2005
  • 본 논문에서는 기존 코플래나 웨이브가이드(CPW), 유한접지(FG) CPW, 그리고 접지(G) CPW와 같은 세 종류의 균일단면 구조의 CPW와 $TE_{01{\delta}}$ 모드 유전체공진기(DR : Dielectric Resonator)간의 결합 특성을 연구하고 마이크로스트립과 DR과의 결합과 같은 병렬 공진 특성을 보이는 CPW 와 DR간의 결합회로의 설계 방법을 제안한다. 결합 특성은 DR을 CPW의 접지와 신호선사이의 두 간격 중의 하나의 중심 상에 유전체 지지대(Support)를 이용하여 위치시키고 접지 방향으로 이동하면서 연구되었다. HFSS(High Frequency Structure Simulator : Finite Element Method Commercial Tool)의 시뮬레이션과 측정된 S-파라미터 값은 잘 일치했다. 마지막으로, 위에서 언급한 세 종류의 CPW와 DR과의 결합과 마이크로스트립라인과 DR과의 결합을 무부하 품질계수인 $Q_u$를 이용하여 비교하였다. 비교결과 CPW와 DR과의 결합은 마이크로스트립라인과 DR과의 결합보다 높은 $Q_u$ 값을 나타냈고 그 중에서 GCPW와 DR과의 결합이 가장 높은 $Q_u$를 보여줬다.

  • PDF

Implementation of Tuneable Filter Using CPW Coupled Line and Varactor Diode

  • Park, Jeong-Heum
    • 조명전기설비학회논문지
    • /
    • 제20권9호
    • /
    • pp.40-44
    • /
    • 2006
  • This study investigated a new tuneable bandpass filter based on coplanar waveguide coupled line structure, and using the varactor diode for tuning the center frequency of the filter. The filter was designed by a commercial simulator and had a tuning range of 180[MHz] from 0.95[GHz] to 1.13[GHz]. The filter acceptable values regarding the insertion loss was less than 3[dB] and its return loss greater than 12[dB]. The figure of merit of the implemented tuneable filter increased with the reverse bias voltage up to 14[V] on the varactor diode. The proposed filter has a promising future as it can be used in integration processes and in various materials as substrate.

등각사상방법을 이용한 도체로 보강된 결합 도파 선로의 정전기장과 전위 분포 해석 (Analysis of Electrostatic Field and Potential Distributions in Conductor-Backed Coupled Coplanar Waveguide Using Conformal Mapping Method)

  • 유태훈;한기수
    • 조명전기설비학회논문지
    • /
    • 제24권6호
    • /
    • pp.35-42
    • /
    • 2010
  • 본 논문에서는 등각사상 방법(conformal mapping method)을 사용하여 도체로 보강된 결합 도파 선로(conductor-backed coupled coplanar waveguide)의 정전기장 분포와 전위 분포를 계산하는 해석적인 수식을 유도하였다. 그리고 유도한 수식을 사용하여 결합 도파 선로 구조 전체에 분포하는 정전기장과 전위분포를 계산하고 이를 분석하였다. 논문에서 사용한 방법은 반복계산 과정을 필요로 하지 않으므로 이를 사용하면 전파해석방법(full-wave analysis method)보다 전기장분포를 빠르고 간편하게 계산할 수 있다. 이 방법은 결합기, 필터, 마이크로스트립 안테나와 같은 결합선로를 사용한 마이크로파집적회로의 분석에 폭넓게 응용될 수 있다.

A Miniaturized CMOS MMIC Bandpass Filter with Stable Center Frequency for 2GHz Application

  • Kang, In Ho;Guan, Xin
    • 한국항해항만학회지
    • /
    • 제36권9호
    • /
    • pp.737-740
    • /
    • 2012
  • A miniaturized CMOS bandpass filter for a single RF transceiver system is presented, using diagonally end-shorted coupled lines and lumped capacitors. In contrast to conventional miniaturized coupled line filters, it is proven that the effective permittivity variation of the coupled transmission line has no effect on shifting the center frequency when the bandpass filter is highly miniaturized. A bandpass filter at a center frequency of 2 GHz was fabricated by $0.18{\mu}m$ CMOS technology. The insertion loss with the die area of $1500{\mu}m{\times}1000{\mu}m$ is -5.14 dB. Simulated results are well agreed with the easurements. It also verify the center frequency stability in the compact size bandpass filter.

Design of an extremely miniaturized planar ring hybrid

  • Kang, In Ho;Sun, Shu Zhong
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권7호
    • /
    • pp.752-759
    • /
    • 2013
  • This paper presents a method for analyzing and designing an extremely miniaturized planar ring hybrid, using the combination of parallel and diagonally shorted coupled lines. In contrast to conventional miniaturized coupled line filters, it is proven that the required electrical length of transmission line can be largely reduced to even a few degrees, not only effectively suppressing the spurious passband but also approximately maintaining the same characteristic around the stable center frequency. A ring hybrid filter at center frequency of 1 GHz was fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate. The insertion loss of a ring hybrid filter with the die area of $30mm{\times}30mm$ is -4.68 dB. Simulated results are well agreed with the measurements.

Tandem구조를 이용한 V-band용 CPW 3-dB 방향성 결합기 (V-band CPW 3-dB Directional Coupler using Tandem Structure)

  • 문성운;한민;백태종;김삼동;이진구
    • 대한전자공학회논문지TC
    • /
    • 제42권7호
    • /
    • pp.41-48
    • /
    • 2005
  • 본 연구에서는 60 GHz 대역의 무선 LAN(Wireless Local Area Network) 시스템에서 Balanced 구조를 갖는 증폭기나 믹서에 응용이 가능한 CPW(Coplanar Waveguide)구조의 Tandem 형 3-dB 방향성 결합기를 설계하고 제작하였다. 이는 기존의 edge-coupled 선로를 이용한 3 dB 결합기가 가지는 제작의 어려움과 방향성의 문제를 개선하기 위해 단일 결합선로를 다단으로 평행하게 연결한 구조이다. 우리는 소자의 크기와 제작의 용이함을 고려해, 결합계수가 -8.34 dB를 갖는 단일 결합선로를 2단으로 평행하게 연결한 구조를 채택하였다. 그리고 기존의 Tandem 결합기 제작에서 사용되어왔던 다층 기판 구조나 본딩 구조가 아닌 에어브리지 구조를 이용하여 단일 평면으로 쉽게 구현할 수 있도록 하였고, V-band(50 $\~$75 GHz)내에서 동작할 수 있도록 기생성분을 줄이고 소자 특성을 유지시켰다. 측정결과 V-band에서 완만한 3.5 $\~$4 dB의 결합도와 87.5$^{\circ}{\pm}1^{\circ}$ 의 위상차를, 60 GHz 에서는 30 dB 이상의 방향성을 확인하였다.

D-CRLH Based Band Rejection Filter using a Concavo-Convex Coupled CPW Transmission Line

  • Seo, Soo-Duk;Cho, Hak-Rae;Yang, Doo-Yeong
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권2호
    • /
    • pp.463-469
    • /
    • 2016
  • In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

집중소자를 이용한 소형화된 방향성 결합기 설계 (Design of Miniaturized Directional Coupler Utilizing Lumped Element)

  • 용광성;육종관
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.251-255
    • /
    • 2003
  • In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.

  • PDF

연성 인쇄 회로를 이용한 광대역 Marchand 발룬 (Wideband Marchand Balun Using Flexible Printed Circuit)

  • 이선호;주성호;이해영
    • 한국전자파학회논문지
    • /
    • 제18권2호
    • /
    • pp.111-117
    • /
    • 2007
  • 본 논문에서는 기능성 연결부에 대한 응용으로, 연성 인쇄 회로의 조건에서 광역 결합 CPW 구조를 이용한 광대역 Marchand 발룬을 제작 측정하였다. 제안된 발룬은 결합 선로 이론을 바탕으로 설계, 기존의 마이크로스트립 라인 구조의 발룬과 비교하여 작은 크기로 향상된 특성을 나타냈다. 측정 결과 72 %의 넓은 대역폭을 갖고, 가용 주파수 내($1.63{\sim}3.44$ GHz)에서 삽입 손실의 차이와 위상 차이는 각각 0.2 dB, $1^{\circ}$ 이내로 나타났다. 따라서 제안된 발룬은 안테나와 RF 전단부의 연결부로 사용되어 전체적인 성능 향상에 기여할 것으로 기대된다.

Design of Planar-Type Modified Folded Loop Antennas

  • Park, Sung-Il
    • Journal of information and communication convergence engineering
    • /
    • 제8권5호
    • /
    • pp.489-492
    • /
    • 2010
  • This paper proposes the planar-type modified monopole antennas of loop structure. This antenna has an opened center of a conventional closed loop structure with an inside-folded terminal of the loop microstrip line. The size of the proposed antenna was minimized by folding the end of the loop. Also, the reactance value has been minimized by increasing capacitances between the coupled microstrip line. Therefore the proposed antenna has been compacted to about 20% from a conventional loop antenna and has increased its efficiency. The proposed antennas have an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6~3.56 GHz) with VSWR$\leq$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9%. These properties could satisfy the S-DMB band.