• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.191-200
• /
• 2016

The ventilation effect of a ventilation system, which is classified as the forced ventilation and natural ventilation, is predominantly dependent on the combination of air supply and discharge. Perhaps the simplest ventilation is merely supplying the air as it is. However, to improve the indoor working environment during the summer, an air supply that is cooled to some extent has been widely adopted. Recently, a cooling method utilizing the vaporization of water was introduced. In this study, the performance of an evaporation-type air supply unit that was produced by Japan K-company and was installed in a shoe-manufacturing plant in Busan was investigated. The purpose of the experiment was to measure how much the supplied air could be cooled. From this experimental study, we confirmed that the evaporation-type air supply system is efficient, capable of improving the working environment during the summer while minimizing the energy cost.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.441-446
• /
• 2008

This study was conducted to determine the effect of heat stress on laying hen performance during summer. A total of 180 Hyline-brown layers, 98 days of age, were housed in a enclosed house. The daily maximum temperature in the house was ranged $26{\sim}36^{\circ}C$. The egg production was markedly fallen than other days when daily maximum temperature in the layer house became more than $33^{\circ}C$. As water intake and feed intake increased to $490\;mL\;bird^{-1}\;day^{-1}$ and $240\;g\;bird^{-1}\;day^{-1}$, the egg production soared. But it was hardly increased more than them. Based on these results, layer house roof should be amply insulated to improve the egg production of layers. If not insulated, the shade curtain should be installed above roof and cool water sprayed before and after 2 p.m. And layers should be provided cool drinking water of about $15^{\circ}C$ in the day time.

• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.465-475
• /
• 2011

It is known that energy consumption in bottom floor of typical Korean-style apartment is the highest. Previous studies for energy consumption in accordance with floor level appear to be very limited due to the dependence on single energy variable such as electric power or LNG separately, based on past flat type of apartment. Acknowledging these constraints, an empirical study for a tower type emerged recently as new style of apartment in South Korea was conducted to demonstrate how a comprehensive evaluation for both electric power and LNG consumption can be used to assist in monitoring the total energy consumption in terms of floor specific settings. It was possible to identify that energy consumption in bottom floor is lesser than that of top floor, to the contrary, fact known from previous study. Also electric power consumption in top floor was identified as 15% higher than that of floor in the least. It is anticipated that this integrated utilization of electric power and LNG data would present more scientific and objective evidence for the energy load among floor level of tower type apartment by overcoming serious constraints suffered from the past single variable investigation. Ultimately, the result in this paper could be used as a valuable reference to providing priority for energy saving activities in top floor such as cool roof or green roof.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.97-102
• /
• 2011

The characteristics of traditional Thai houses are post-and-beam structure, lifted floor on pillars, and gabled roof as like as houses in other Southeast Asia countries. However 'charn', connective terrace among each room, is the most unique element in Thai houses which make the area under the 'charn' cool and useful. In Thailand, there are number of housing types caused by historic, social, cultural and geographic factors. This research is focused on comparative study of planning of traditional Thai houses of central and northern region, which have the biggest differences in between. Thai traditional house in central region has symmetrical arrangement on layout and when family members are added, they extend 'charn' and attach another building. While in Northern region, the 'charn' is located not in the center and in the front, and the direction of the main building is perpendicular to the length direction of the veranda. This research has a limitation to be generalized because just two region in Thailand were analyzed and the numbers of case studies were few. Nevertheless, we expect this paper to be a primary guidance to understand Thai traditional houses and we also expect that our research area will cover the all areas in Thailand and finally expand to conclude the commonality and diversity of traditional houses in Southeast Asia in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.45-46
• /
• 2017

As the environment and energy problems such as global climate change (global warming, urban heat island phenomenon) and energy depletion have come to the fore, the construction and waterproofing industry are responding more critically to the demands of global green technology and are employing more eco-friendly technologies as of recent. In this study, the application of the waterproofing material with thermal response performance in construction buildings was investigated to confirm whether the thermal performance is being properly secured by the change of the surface temperature. Experimental results showed that the surface temperature difference between before and after the application is at least 19.8℃ at the maximum 26.3℃. When the degradation rate is converted, the degradation effect of about 40% on average was confirmed.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.107-118
• /
• 2006

This study was carried out to introduce a couple of commercialized patented technologies in the area of turfgrass production. All sod production related patents in Korea during the period from Dec. 20, 1948 to Dec. 30, 2005 were reviewed. Details of two patents (patent No. 0434389 and 0478194) were included. The results are summarized as follows: 1. One of the domestic patents on sod production was the technique using natural and plastic films. Information on topsoil mixtures was also reviewed form foreign patents. 2. Patented multi-purpose sowing equipment can evenly mix soil, sand, fertilizer and other soil conditioners with seed, stolen and rhizome of turfgrass. 3. Patent on cool-season turfgrass sod production provide topsoil mixture combination and mixing ratio for sports field, landscape area and roof garden.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.245-250
• /
• 2005

This study was carried out to find out how space allowance affect the social behavior of Korean native cattle (Bos taurus coreanae) steers. Twelve Korean native cattle (Bos taurus coreanae) steers were used as subjects, each of which was 30-month-old and observation period was from June to July 2003. Five (T1) and seven (T2) steers were allotted to two pens of $5m{\times}10m$ in a building with slate roof and open sides respectively. They were fed at 09:00 h and 16:00 h, twice a day. The behaviors of steers were recorded from 06:00 h to 17:00 h, using two color CCD cameras (Samsung SDC-411, Korea), one B/W CCD cameras (Samsung SBC-340, Korea), one multiplexer (Samsung SDM-081, Korea) and a time lapse VCR (Samsung SRV-30, Korea). The behaviors of each steer were recorded every 2 min using an instantaneous point sampling method. While the mean percentage of time budget in WA of T1 was lower than that of T2 (p<0.05), the mean percentage of time budget in SF of T1 was higher than that of T2 (p<0.05). When it gets hot, steers in T1 rested from 10:00 h to 14:00 h when it gets cool, showing 40~80% of LD rate while steers in T2 rested from 12:00 h, when it very hot to 17:00 h, showing 20~50% of LD rate, which is relatively low. Steers in T1 were fed from 06:00 h to 08:00 h when it was cool and from 16:00 h to 18:00 h, showing 20~45% of EA rate while steers in T2 were fed from 08:00 h to 14:00 h when it was hot, showing 25~50% of EA rate. In conclusion, it turned out that the number of steers affected their social behavior, and T1 was better environment than T2 in terms of welfare.

• Journal of Ginseng Research
• /
• v.7 no.2
• /
• pp.172-192
• /
• 1983

Light environment and growth of Panax ginseng In habitat and cultivation under natural shade were renewed. Grower's experiences on ginseng stand In relation to light environment were assessed. Change of shading method and grower's concepts on light requirement of ginseng plant in Korea, Manchuria and Japan was counted. Growth of wild ginseng was better under rich light. Optimum crown density index appeared to be 0.7 In natural habitat and 0.4 to 0.7 for the cultivation in forest. Change of light Intensity in forest was greatest in May and reached near to constant value (from 40% to 3% for broad leaf deciduous forest and loom 4% to 2% for pine forest). Insufficient light condition induced long and thin stem, poor flowering and seed bearing, and sequent dormancy. Relation between light and ginseng strand was not clear but light Interception with cool weather was effective. Topography and orientation of bed have been deeply considered for light environment. Panel or bark of won were used for shading in deep forest manly In Manchuria while reed blind and straw thatch were used in Korea. Kinds and number of shades material and seasonal or daily schedule have been simplified probably by labor pressure due to eulargement of plantation. Post height has been greater while width of roof, bed and ditch has changed lisle. Scientific survey in the past omitted important light control methods (complete light hardening etc) which has been practiced in specific areas. The concept and technique of light control in the past in Korea were delicate and intensive including the control of temperature and moisture. For the application of old concept in modem cultivation precise Investigation of the technique including the measurement of light, temperature and moisture is needed.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.86-93
• /
• 2016

The existence of high temperature equipment such as steam pipe, deaerator, steam storage tanks and main steam stop valves makes relatively higher workplace temperature in a power plant of the turbine building. In order to cool down the air temperature in the turbine building, the outside air flow with lower temperature passes through the window and the hotter air in the building is extracted to the outside by installing the ventilation fan on the roof. Nevertheless, higher temperature regions near the high temperature equipment still exist in the turbine building and additional fans for the temperature reduction in the higher temperature region should be examined for the optimal location and mass flow rate. The purpose of the present study is to suggest the optimized location and capacity of the additional ventilation fans for a comfortable working environment. From the present study, it has been elucidated that the additional ventilation fans might be located near the high temperature deaerator and it could reduce the mean temperature in the turbine building by $3.0^{\circ}C$ and the temperature near the deaerator could be reduced by $4.2^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).