• 한국멀티미디어학회논문지
• /
• 제8권12호
• /
• pp.1572-1580
• /
• 2005

The common requirements for watermarking are usually invisibility, robustness, and capacity. We proposed the watermarking for 3D mesh model based on projection onto convex sets for invisibility and robustness among requirements. As such, a 3D mesh model is projected alternatively onto two convex sets until it converge a point. The robustness convex set is designed to be able to embed watermark into the distance distribution of vertices. The invisibility convex set is designed for the watermark to be invisible based on the limit range of vertex movement. The watermark can be extracted using the decision values and index that the watermark was embedded with. Experimental results verify that the watermarked mesh model has both robustness against mesh simplification, cropping, affine transformations, and vertex randomization and invisibility.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.67-72
• /
• 2001

In this paper, the plano-convex lens antenna fed by a single patch is studied for a microwave remote-traffic monitoring sensor with constraints of small size and low cost. Measurement of an AUT (Antenna Under Test) involves the considerations of a triangular groove for matched layer and metallic shielding effects. A formulation for extracting the parameters of a piano-convex lens antenna, based on geometrical optics, is introduced using Fermat`s principle of the equi-phased ray condition. Teflon ($\varepsilon_{{\gamma}}$/ =2.0) is chosen as a material of a plano-convex lens antenna for adjustment of aberrations on the lens surfaces automatically. A fabricated plano-convex lens shows 3-dB beamwidth of 7.5 degree and side-lobe level of -29 dB with an aperture distribution of the parabolic-squared taper on pedestal. This lens supports easier integration with the planar microwave circuits by using a microstrip single patch as a primary feeder of the lens antenna.feeder of the lens antenna.

• 전자공학회논문지CI
• /
• 제43권2호
• /
• pp.81-92
• /
• 2006

본 논문에서는 3D 메쉬 모델에 대한 POCS 기반의 워터마킹 방법을 제안하였다. 제안한 방법에서는 워터마킹 시스템의 조건들 중 견고성 및 비가시성에 대한 볼록 집합을 설계한 후 3D 메쉬 모델의 꼭지점들을 이 두 집합들로 수렴 조건을 만족할 때 까지 반복 교대 투영한다. 견고성 제약 조건 집합은 각 꼭지점의 거리 분포에 워터마크를 삽입하는 방법에 의하여 정의되며, 비가시성 제약 조건 집합은 꼭지점 좌표의 변화량에 의하여 정의된다. 실험 결과로부터 제안한 방법이 좌표 변환, 스케일링, 메쉬 간단화, 절단, 및 꼭지점 잡음 첨가 등의 공격에 대한 우수한 견고성 및 비가시성을 확인하였다.

• 대한전자공학회논문지SP
• /
• 제39권2호
• /
• pp.69-78
• /
• 2002

본 논문에서는 복잡한 배경에서의 얼굴 추출 방법을 제안한다. 제안된 알고리즘은 적응 퍼지 색 분할기법을 사용하여 얼굴색과 머리색을 분할시킨다. 얼굴색 분포는 Y,Cb,Cr 색 공간내에서 유도되어지고, 조명값에 적응적인 퍼지 시스템을 사용하여 얼굴색을 구분해낸다. 머리색은 RGB 색 공간내에서 구분되어진다. 전처리 과정을 거쳐 추출되어진 얼굴색과 머리색 영역에 컨벡스 헐을 적용하여 그들의 관계를 통해 최종적인 얼굴 영역이 추출되어진다. 제안된 방법은 기존의 패턴 매칭 방법에 비해 효율적인 성능을 나타낸다. 제안된 알고리즘의 유효성을 실험을 통해 증명하며, 색 영역에서의 제한 조건 없이 성공적으로 얼굴 영역을 추출해 냄을 알 수 있다.

• International Journal of Reliability and Applications
• /
• 제10권2호
• /
• pp.81-88
• /
• 2009

A non-parametric procedure is presented for testing exponentially against used better than aged in convex ordering class (UBAC) of life distributions based on u-test. Convergence of the proposed statistic to the normal distribution is proved. Selected critical values are tabulated for sample sizes 5(5)40. The Pitman asymptotic relative efficiency of my proposed test to tests of other classes is studied. An example of 40 patients suffering from blood cancer disease demonstrates practical application of the proposed test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.19-23
• /
• 1995

The thermal deformation of a workpiece during grinding is one of the most important factors that affect a flatness of a grinding surface. The heat generated in one-pass surface grinding causes the convex deformation of a workpiece. Therefore, the ground durfae represents a concave profile. In the analysis a simple model of the temperature distribution, based on the results of a finite element method, is applied. Theanalyzed results are compared with experimental results in surface grinding. The main results obtained are as follows: (1) The temperature distribution of a workpiece by FEM has a good agreement with the experimental results. (2) The bending moment by generated heat causes a convex deformation of the workpiece and it leads to a concave profile of the grinding surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.868-872
• /
• 1997

The thermal deformation of a workpiece during grinding is one of the most important factors that affect a flatness of a grinding surface. The heat generated in one-pass surface grinding causes the convex deformation of a workpiece. Therefore, the ground surface represents a conacve profile. In the analysis a simple model of the temperature distribution,based on the result of a finite element method, is applied. The analyzed results are compared with experimental results in surface grinding. The main results obtained are as follows; (1) The temperature distibution of a workpiece by FEM is comparatively in good agreement with the experimental results. (2) The bending moment by generated heat cause a convex deformation of the workpiece and it reads to a concave profile of the grinding surface.

• 대한수학회논문집
• /
• 제35권3호
• /
• pp.867-877
• /
• 2020

The aim of this article is to make a connection between the Pascal distribution series and some subclasses of normalized analytic functions whose coefficients are probabilities of the Pascal distribution. To be more precise, we investigate such connections with the classes of analytic univalent functions with positive coefficients in the open unit disk 𝕌.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.8-15
• /
• 2021

Micro-LEDs can be applied to various parts of a product. However, it has disadvantages compared to general LEDs in large displays such as low efficiency, intensity, and contrast ratio, among others, owing to their short history of study. The simulations were carried out using ray-tracing software to investigate the change in light intensity and light distribution according to pattern shapes on the sapphire substrate of the flip-chip micro-LED (FC μ-LED) array. Three patterns-concave square patterns, convex square patterns, and Ag coated convex patterns-which existed on the opposite side of FC μ-LEDs (115 ㎛ × 115 ㎛) array, were applied. The intensity of FC μ-LEDs on the center of the receivers depends on the pattern depth with shape. The concave square patterns having FC μ-LEDs arrays show that decreasing intensity as the patterns depth. On the contrary, the convex square patterns having FC μ-LEDs arrays shows that increasing intensity as the patterns depth. In addition, the highest intensity shows that FC μ-LEDs having Ag-coated convex patterns on the opposite side of sapphire lead to a reduction in light crosstalk owing to the Ag film.

• 호남수학학술지
• /
• 제40권3호
• /
• pp.529-538
• /
• 2018

The purpose of the present paper is to establish connections between various subclasses of analytic univalent functions by applying certain convolution operator involving Poisson distribution series. To be more precise,we investigate such connections with the classes of analytic univalent functions with positive coefficients in the open unit disk.