• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.3
• /
• pp.79-86
• /
• 1997

The characteristics of wastewater treatment according to operating condition of indirectly aerated fluidized bed filled with sand media were studied experimentally, and the obtained results were as follows; 1. During be operated under the BOD loading rate, $4.5kg-BOD/m^3{\cdot}day$, effluent SS according to the increase of recirulation velocities was gradually decreased. 2. According to the increase of media concentration, sludge convertion rate was gradually increased. 3. Under the same BOD loading rate, according to the increase of recirulation velocities, F/M ratio was gradually increased, however, sludge convertion rate was greatly decreased. On the other hand, inffluent BOD concentration has not an important effect. 4. Under the constant recirulation velocities, according to the increase of BOD loading rate, sludge convertion rate was gradually increased. 5. Under the same BOD loading rate, according to the increase of recirulation velocities, oxygen consumpion rate of microorgnism was gradually increased.

• Journal of Arbitration Studies
• /
• v.5 no.1
• /
• pp.365-387
• /
• 1995

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.126-132
• /
• 1996

This study is pre-research to evaluate the reasonability of convertion aluminum alloy cylinder head cover into plastic cylinder head cover using finite element analysis. The basedata which are needed in design are shown. On processing the study size of mesh and kind of elements are varied and adaptiv method is used.

• Korean Journal of Pharmacognosy
• /
• v.16 no.4
• /
• pp.253-258
• /
• 1985

Various determination methods of saikosaponins in Bupleuri Radix are discussed, and the content of each saikosaponin which is original and/or artifact is rearranged. The changes of saikosaponin a and d into saikosaponin $b_1\;and\;b_2$, respectively, under gastric pH, were studied.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.527-530
• /
• 1991

Power electronics technology based on power Semiconductor switching devices (PSSD) is used extensively as a mean to control electrical energy in domestic and industry applications. This paper presents new driving circuits considering characteristics of PSSDs, which can drive SIT and SI-Thy having potentiality of applications in future industry. And it is shown that the preposed design method can be applied to main power convertion circuits.

• The Journal of Information Technology
• /
• v.12 no.2
• /
• pp.39-47
• /
• 2009

Residue Number System is used for the purpose of increasing the speed of processing in the many application parts of Image Processing, Computer Graphic, Neural Computing, Digital Signal Processing etc, since it has the characteristic of parallelism and no carry propagation at each moduli. DRNS has the twice RNS Conversion, it is used to decreases the size of the operator in RNS. But it has a week point on the Second Residue to First Residue Conversion time. So, in this paper SRTFR(Second Residue to First Residue) Converter using MRC(Mixed Radix Conversion) is designed to decrease the size of RTB(Residue to Binary) Converter. Since the proposed SRTFR Converter using MRC(Mixed Rdix Convertion) has a pipeline processing. Also, modular operation is applied to at each partitioned SAM(Subtraction and Addition) and MA(Multiplication and addition). In the following study, the more effective design on MA is needed.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1095-1097
• /
• 1993

The double excited induction motor has two sets of three-phase system : One is connected to the ac source to take care of energy convertion, and the other is to the inverter controlable frequency and/or magnitude of voltage, both of the induction mode and the synchronous mode are possible in double excitation motor, and the proposed double excitation motor can be driven as a synchronous motor by the extra three-phase input. At the synchronous mode the efficiency is improved so higher than that at induction mode or induction motor. The rating of the inverter used for speed control can be reduced upto one-fifth of that for conventional induction motor. Also the cost and maintenance fee of double excitation induction motor can be reduced compared to any other motors.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.379-381
• /
• 1988

Racemic nuciferal(1) and nuciferol(2), the terpenic natural perfumeries, have been synthesized by a simple procedure. The benzylic halide 6; 1-(1-chloroethyl)-4-methylbenzene, was prepared by converting p-tolualdehyde(4) into 1-(p-tolyl)-1-ethanol(5), followed by convertion of 5 into corresponding chloride. The Grignard reagent of 6 was reacted with the bromoacetal 7, 2-(2-bromoethyl)-1,3-dioxolane, to give a crosscoupling product 8, which was hydrolysed to 4-(p-tolyl)-pentanal (9). The Wittig reaction of isopropylide 10 with 9 yielded arcurcumen(11). The stereospecific allylic oxidation of the gem-dimethyl olefin 11 with selenium dioxide afforded a trans-aldehyde, (${\pm}$)-1, which was reduced to corresponding alcohol, (${\pm}$)-2.

• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.29-31
• /
• 1975

This experiment Was carried out under two points of view, from May 1st to the end of 1973. One was the comparative determination of the activation factor of Lead dioxide by kinds in measuring of Sulfur oxides concentration by $PbO_2$ cylinder method, and the other was the comparison that result with the record of auto analyzer. Five measuring sites were selected out of Seoul City. Three kinds of Lead dioxide made in Japan (B,C and D) were compared with Standard $PbO_2$ (A for use in Determination of Sulphur in the atmosphere, purity 99% up) made in British Institution, and monthly measuring was conducted at every sampling site. The recording by auto analyzer (Beckman Model 906-A $SO_2$ Analyzer) was conducted once or twice a month for 24 hours at each sampling site during the same period. And some significant results were obtained. 1. In comparative experiments to determine the activation degree of three kinds of Lead dioxide (B,C and D), the obtained correction factor of B reagent was 1.09, 1.16 in C and 1.30 in D against Standard $PbO_2$ (A). Therefore, it should be in need of standardization or clear statement about the reagents for use, in determination sulfur oxides by $PbO_2$ cylinder method. 2. Generally, the concentration of Sulfur dioxide by wilkins' convertion method from $SO_3$ showed about 20-30% higher than those by Auto analyzer.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.351-357
• /
• 2011

In this study, we have intended to analyze the possibility of using the precise geoid model and to find the best geoid model for working by the airborne LiDAR system. So we have calculated the geoid height from the precise geoid models (KGEOID08, EGM2008, EIGEN-CG03C) and have analyzed results by comparing the geometric geoid height from surveying and geoid heights from geoid models. As a result, the KGEOID08 that had 0.152m of RMSE was assessed the best geoid model for making DEM(DTM) by airborne LiDAR system. Also we have found the needed arrangement and numbers of reference point when the KGEOID08 was used for conversion into orthometric height of LiDAR data.