• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.563-571
• /
• 1989

The load distribution factor in the perforated square plate under concentrated load acting at arbitrary points through elastic media are calculated. For the calculation the perforated plate was converted into an orthotropic plate using the method suggested by J.B. Mahoney. In the process of the calculation the angle support at each corners was equivalent to a point support having equivalent stiffness. The deflections for the calculation of the load distribution factor were obtained using auxiliary plate extended in both directions of the plate and compared with the results from ANSYS calculations. After showing the validity of the current method, the calculation of the load distribution factor was performed. The result showed that the load distribution factor at the periphery of the plate is larger than that of in the central locations. This load distribution factor could be used for re-distribution of the applied load in more accurate analysis of the plate as well as it can be used in the analysis of the elastic media as the load factor.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.493-503
• /
• 2015

This study analyzed how spatial distribution of Himantormia lugubris is affected by the microenvironment in the Antarctic Specially Protected Area (ASPA) No. 171 located in the Barton Peninsula of King George Island that belongs to the maritime Antarctic. In order to determine the population structure of H. lugubris growing in Baekje Hill within ASPA No. 171, we counted the individuals of different size groups after dividing the population into 5 growth stages according to mean diameter as follows: ≤ 1 cm, 1-3 cm, 3-5 cm, 5-10 cm, and ≥ 10 cm. The count of H. lugubris individuals in each growth stage was converted into its percentage with respect to the entire population, which yielded the finding that stages 1 through 5 accounted for 32.8%, 25.3%, 15.9%, 22.5%, and 3.5%, respectively. This suggests that the population of H. lugubris in ASPA No. 171 has a stable reverse J-shaped population structure, with the younger individuals outnumbering mature ones. The mean density of H. lugubris was 17.6/0.25 m², mean canopy cover 13.3%, and the mean dry weight 37.8 g/0.25 m². It began to produce spore in the sizes over 3 cm, and most individuals measuring 5-10 cm were adults with sexually mature apothecia. The spatial distribution of H. lugubris was highly heterogeneous. The major factors influencing its distribution and performance were found to be the period covered by snow, wind direction, moisture, size of the substrate, and canopy cover of Usnea spp. Based on these factors, we constructed a prediction model for estimating the spatial distribution of H. lugubris. Conclusively, the major factors for the spatial distribution of H. lugubris were snow, wind, substrate and the competition with Usnea spp. These results are important for understanding of the distribution in the maritime Antarctic and evolution of H. lugubris that claims a unique life history and ecological niche.

• Particle and aerosol research
• /
• v.19 no.4
• /
• pp.155-164
• /
• 2023

APS (Aerodynamic Particle Sizer) and OPC (Optical Particle Counter) have been widely used to real-time measurement of indoor and outdoor aerosols. The APS measures the size distribution based on an aerodynamic diameter, while the OPC uses optical diameter to measure the size distribution of aerosols. Since obtaining a size distribution based on aerodynamic diameter is important to understand aerosol characteristics, lots of researcher had been developed experimental equations which can convert optical diameter into aerodynamic diameter. However, previous studies have conducted repeated experiments on particles having a single diameter. In this study, an experimental method of converting optical diameter into aerodynamic diameter through a single experiment was presented. The collection efficiencies of an axial cyclone were measured using APS and OPC at the same time, and the correlation equation between aerodynamic diameter and optical diameter was driven through a theoretical model. Using the proposed method, the size distribution of NaCl particles measured by OPC showed a high correlation with the size distribution obtained by APS (0.93 of R-squared value). In the tests conducted on ISO A1, A2, and A4 test particles, the converted OPC size distribution tended to be similar to the APS size distribution, and for each of test particles (ISO A1, A2, and A4), the R-squared values for the APS particle size distribution were 0.75, 0.86, and 0.89, respectively.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.4
• /
• pp.281-289
• /
• 2009

Topology optimization has been widely used for the optimal structure design for weight reduction and high performance. Since the result of three-dimensional topology optimization is represented by the discrete material distribution in finite elements, it is hard to interpret from a design point of view. In this paper, the method for interpreting three-dimensional topology optimization resuIt into a series of cross-sectional curve representation is proposed and interfaced with the existing CAD system for the practical use. The concept of node density and virtual grid is introduced to transform element density values into grid density and material boundaries in each cross section are identified based on the element volume rate to satisfy the amount of material specified in the original design intent. Design exampIes show that three-dimensional topology result can be converted into a form of curve CAD model and the seamless interface with CAD software can be achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1241-1249
• /
• 1997

The problem of structural topology optimization can be relaxed and converted into the optimal density distribution problem. The optimal density distribution must be post-processed to get the real shape of the structure. The extracted shape can then be used for the next process, which is usually shape optmization based on the boundary movement method. In the practical point of view, it is very important to get the optimal density distribution from which the corresponding shape can easily be extracted. Among many other factors, the presence of checker-board patterns is a powerful barrier for the shape extraction job. The nature of checker-board patterns seems to be a numerical locking. In this paper, an efficient algorithm is presented to suppress the checker-board patterns. At each iteration, density is re-distributed after it is updated according to the optimization rule. The algorithm also results in the optimal density distribution whose corresponding shape has smooth boundary. Some examples are presented to show the performance of the density re-distribution algorithm. Checker-board patterns are successfully suppressed and the resulting shapes are considered very satisfactory.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.62.1-62.1
• /
• 2014

Metallicity distribution of globular clusters (GCs) provides an important clue for star formation history of their host galaxy. With an assumption that GCs are generally old, GC colors have been used as a proxy of GC metallicities. Bimodal GC color distributions observed in most large galaxies have, for decades, been interpreted as bimodal metallicity distributions, indicating the presence of two populations within a galaxy. However, the conventional view has been challenged by a new theory that non-linear GC color-metallicity relations (CMRs) can cause a bimodal color distribution even from a single-peaked metallicity distribution. Using the photometric and spectroscopic data of NGC 5128 GCs in combination with stellar population simulation models, we examine the effect of non-linearity in GC CMRs on the transformation of GC color distributions into metallicity distributions. Although, in some colors, offsets are present between observations and models in the CMRs, their overall shape agrees well for various colors. After the offsets are corrected, the observed spectroscopic metallicity distribution is well reproduced via modeled CMRs from various color distributions having different morphologies. On the other hand, the linearly converted metallicity distributions from GC colors show a significant discrepancy with the observed spectroscopic metallicity distribution. We discuss the implications of our results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.632-638
• /
• 2010

This paper presents an optimum tire force distribution method for 6WD/6WS(6-Wheel-Drive and 6-Wheel-Steering) electric vehicles. Using an independent steering and driving system, the performance of 6WD/6WS vehicles can be improved, as, for example, with respect to their maneuverability under low speed and their stability at high speed. Therefore, there should be a control strategy for finding the optimum tire forces that satisfy the driver's command and minimize energy consumption. From the driver's commands (steering angle and accelerator/brake pedal stroke), the desired yaw moment, the desired lateral force, and the desired longitudinal force were obtained. These three values were distributed to each wheel as the torque and the steering angle, based on the optimum tire force distribution method. The optimum tire force distribution method finds the longitudinal/lateral tire forces of each wheel that minimize the cost function, which is the sum of the normalized tire forces. Next, the longitudinal/lateral tire forces of each wheel are converted into the reference torque inputs and the steering wheel angle inputs. The proposed method was tested through a simulation, and its effectiveness was verified.

• IE interfaces
• /
• v.10 no.3
• /
• pp.179-187
• /
• 1997

The efficiency of material flow systems in terms of optimal network flow and minimum cost flow has always been an important design and operational goal in material handling and distribution system. In this research, an attempt was made to develop a new algorithm and the model to solve a stochastic material flow network with bidirectional and uncertain flows. A stochastic material flow network with bidirectional flows can be considered from a finite set with unknown demand probabilities of each node. This problem can be formulated as a special case of a two-stage linear programming problem which can be converted into an equivalent linear program. To find the optimal solution of proposed stochastic material flow network, some terminologies and algorithms together with theories are developed based on the partitioning and subgradient techniques. A computer program applying the proposed method was developed and was applied to various problems.

• Journal of Forest and Environmental Science
• /
• v.28 no.3
• /
• pp.170-178
• /
• 2012

Dipterocarps or Dipterocarpaceae is a commercially important timber producing and dominant keystone tree family in the rain forests of Borneo. Borneo's landscape is changing at an unprecedented rate in recent years which affects this important biodiversity. This paper attempts to model the natural occurrence (distribution including those areas with natural forests before being converted to other land uses as opposed to current distribution) of dipterocarp species in Sarawak which is important for forest biodiversity conservation and management. Local modeling method of Inverse Distance Weighting was compared with commonly used statistical method (Binary Logistic Regression) to build the best natural distribution models for three genera (12 species) of dipterocarps. Database of species occurrence data and pseudoabsence data were constructed and divided into two halves for model building and validation. For logistic regression modeling, climatic, topographical and edaphic parameters were used. Proxy variables were used to represent the parameters which were highly (p>0.75) correlated to avoid over-fitting. The results show that Inverse Distance Weighting produced the best and consistent prediction with an average accuracy of over 80%. This study demonstrates that local interpolation method can be used for the modeling of natural distribution of dipterocarp species. The Inverse Distance Weighted was proven a better method and the possible reasons are discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.2
• /
• pp.451-461
• /
• 2008

In this study, factor and cluster analysis have been conducted to group the differences in Korean view on national economic policy in the sample of the 2006 Korean General Social Survey (KGSS). According to the 2006 KGSS, the 6 items with a 5-point Likert scale include the questions about whether or the extent to which each respondent supports the specific types of governmental economic policy. In our study, at first, the factor analysis has converted the original 6 items into the 3 composite variables that account for 81% in the total variability. As the second step of factor analysis, factor scores have been computed. Then, the K-means cluster analysis based on the factor scores has been conducted to group the survey respondents into the 3 clusters. In particular, the cross-tabulation analysis has shown that the distribution of the 3 clusters varies with the respondents' socio-demographic characteristics.