• 경영과학
• /
• 제28권2호
• /
• pp.1-16
• /
• 2011

In this study we suggested two optimization models to answer a question from an investor standpoint : how many convertible bonds should one convert, and how many keep? One model minimizes certain risk to the minimum required expected return, the other maximizes the expected return subject to the maximum acceptable risk. In comparison with Markowitz portfolio models, which use the variance of return, our models used Conditional Value-at-Risk(CVaR) for risk measurement. As a coherent measurement, CVaR overcomes the shortcomings of Value-at-Risk(VaR). But there are still difficulties in solving CVaR including optimization models. For this reason, we adopted Rockafellar and Uryasev's[18, 19] approach. Then we could approximate the models as linear programming problems with scenarios. We also suggested to extend the models with credit risk, and applied examples of our models to Hynix 207CB, a convertible bond issued by the global semiconductor company Hynix.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.292-293
• /
• 2011

We proposed a new power system, Superconducting Power System. The SPS consists of superconducting power cables, fault current limiters, and transformers. The basic concept is to replace 154kV conventional cables with 22.9kV superconducting cables and to convert a 154kV substation into a 22.9kV switching station in downtown area. For the application of the SPS to real power system, it is very important to construct the protection system of the SPS. This study presents a protection system for the new Superconducting Power System (SPS).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.876-877
• /
• 2011

Variable Reluctance(VR) 레졸버는 엔코더를 대신해 Hybrid Electric Vehicle (HEV) / Electrical Vehicle(EV) 및 자동화 산업 전반에서 위치센서로써 사용되고 있다. VR 레졸버는 두 개의 출력신호(SIN, COS)를 발생시키며, Resolver-to-Digital Convert(RDC) 알고리즘을 통하여 위치신호로써 변환된다. 위치센서로써의 VR 레졸버는 무엇보다도 회전자의 정확한 위치를 찾아내는 것이 중요하다. 위치 정보의 오류를 발생시키는 원인으로는 다양한 것들이 있다. 본 논문에서는 VR 레졸버 형상을 변화시킴으로써 인해 레졸버를 통해 나온 출력신호에 포함된 각도정보의 정밀도 향상을 위해 FEM 해석을 통해 연구 및 분석 하였다.

• Biomolecules & Therapeutics
• /
• 제18권4호
• /
• pp.351-362
• /
• 2010

Nitric oxide (NO), synthesized from L-arginine by three isoforms of NO synthase (NOS), is a gaseous signaling molecule with an astonishingly wide range of biological and pathophysiological activities, including vasorelaxation, angiogenesis, anti-inflammation, and anti-apoptosis in mammalian cells. Recent studies have shown that NO donors and inhaled NO convert to biologically active NO under biological conditions and act as a signaling molecule in pathophysiological conditions. This review will discuss the roles of NO and its potential therapeutic implication in various human diseases, such as tumor, vascular regeneration, hypertension, wound healing, and ischemia-reperfusion injury.

• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.1-8
• /
• 2002

Cutting force is obtained as a sum of chip removing force and ploughing force. Chip removing force is estimated by multiplying specific cutting pressure by cutting area. Since ploughing force is caused from dullness of a tool, its magnitude is constant if depth of cut is bigger than a certain value. Using the linearity of chip removing force to cutting area and the constancy of ploughing force regardless of depth of cut which is over a certain limit each force is separated from measured cutting force and used to establish cutting force model. New rotation matrix to convert the measured cutting force in reference axes into the forces in cutter axes is obtained by considering that tool angles are projected angles from cutter axes to reference axes.. Spindle tilt is also considered far the model. The predicted cutting force estimated from the model is in good agreement with the measured force.

• Journal of Chest Surgery
• /
• 제18권3호
• /
• pp.461-465
• /
• 1985

Rupture of the aorta following blunt trauma of the thorax may occur more frequently than has generally been recognized. Actual complete transection of the aorta usually results in immediate death but varying degrees of lesser disruption permit increased chance of survival. Chronic traumatic aneurysms are so designated following a period of 3 months from the traumatic incident. The exact time required for the acute process and hematoma to convert into an aneurysm is unknown. Because a thoracic surgeon encounters so few of these aneurysms, it is difficult for him to arrive at sound dicta of management from his personal experience. It is not surprising that controversy exists concerning the therapeutic approach to the aneurysm which is asymptomatic and is discovered months or years after the causative injury. In the hope of improving the surgical treatment of patients with this condition, we reported one case with chronic traumatic aneurysm of the descending thoracic aorta.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2004년도 International Meeting of the Microbiological Society of Korea
• /
• pp.35-38
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2004

Sensor used by semiconductor process produced an MAP sensor and applied to several industry. Among those sensors divided as transducer which convert physical quantity into electrical value, piezoresistive type sensor has been studied for the properties and sensitivity of piezoresistor. In this paper, the variation of seismic mass which have been functioned as actuator moving the cantilever beam analyzed the effect on distribution of resistance change ratio and supposed the optimal shape and position of piezoresistor. The resulting are following; According to the increment of seismic mass size, the value of resistance change ratio decreased caused by improve the stiffness. Y directional piezoresistor is formed in spot of 100 m apart from cantilever edge and length of that is 800$\mu$m. To increase the sensitivity, piezoresistor is made as n-type and x-direction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 춘계학술대회 논문집
• /
• pp.443-448
• /
• 1994

As a basic step of interfacing CAD and CAM, it is required to convert thedrawing data into manufacturing information automatically. In this study the developed system carries out feature recognition from the orthographic views of press mold containing various pockets. Using rhe recognized output data, 3 dimension- al model is built using ADS and AME in order to check the result of recognition. The system consists of 4 main parts, suchas, Preprocessing, Coordinate handling, Feature recognition and 3D-modeling. The system shows a good application example which can interface the design and manufacturing stage in CAD/CAM system on PC level

• Journal of Ginseng Research
• /
• 제14권2호
• /
• pp.274-278
• /
• 1990

The metabolic disturbance and nephrotoxicity induced by sodium dichromate (20 mg/kg, SC) have been diminished by the administration of Korean red ginseng extract (100 mg/kg, PO). Red ginseng has a powerful potency on the blood urea nitrogen (BUN) increment shown in the early 2h after dichromate intoxication. It normalized the dichromate induced hepatic glycogenolysis. The effect of red ginseng on dichroamte induced nephrotoxicity was investigated by hematological analysis, and urinalysis. Ginseng treatment significantly reduced the increases in the urinary excretion of protein and glucose. These effects were dose dependent. Ginseng protected the accumulation of BUN and creatinine in the blood, caused by dichromate intoxication. Unlike CaEDTA, ginseng did not change the urinary excretion of chromiilm and it could not convert hexavalent chronlium to trialvalent chromium. These results suggest that ginseng treatment is effective in decreasing the metabolic disturbance, one of the earliest signs of dichromate toxicity, resulting in the protective effect of dichromate induced renal damage.