• 한국미생물·생명공학회지
• /
• 제25권3호
• /
• pp.277-285
• /
• 1997

Kluyveromyces marxianus var. marxianus isolated as an inulin-assimilating microorganism produces inulin fructotransferase (inulaseII) which catalyses the conversion of inulin into di-D-fructofuranose 1, 2' : 2, 3' dianhydrde (DFAIII). The DFA produced by the organism was isolated by using active carbon column, and identified as DFAIII by high performance liguid chromatography. The culture medium giving maximum inulaseII production was found to consist of 1% sucrose and 0.75% yeast nitrogen base (YNB). The inulasell production was induced by inulin or sucrose as a carbon source and increased by addition of YNB as a nitrogen source. Optimal initial pH of the culture medium, culture temperature and medium volume for the enzyme production were pH 4.7, 30$\circ$C and 140 ml, respectively. Under the optimal conditions described above, the enzyme activity in the culture supematant reached 4.2 units/ml after cultivation for 36 h. The DFAIII was accumulated at 13.25 mg/ml after 48 h of culture in the Jerusalem artichoke tuber medium.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.472-474
• /
• 2008

According to the development of power switching device technology, the power conversion system is used from the small electric power units to the large industrial instruments. These instruments are operated as harmonic sources in the grid and the harmonics cause zero sequence harmonics in the neutral line. To reduce zero sequence harmonics, the zigzag transformer is used conventionally. But the zigzag transformer can reduce only 60~70% of harmonics. In this paper, hybrid power filter for zero sequence harmonics reduction and the harmonic detection method are proposed.

• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.245-253
• /
• 2003

치과용 복합레진의 중합률은 레진 기질내의 이중결합의 전환도를 나타내는 것으로 이는 재료의 물리적 성질과 기계적 성질 및 생체 친화성에 영향을 미친다. 레진의 중합도가 증가하면 취성과 수축이 증가하고 중합도가 낮으면 기계적 물리적 성질이 감소한다. 따라서 본 연구에서는 광중합형 복합레진을 사용하여 플라즈마 아크 중합기 2종, 할로겐 중합기 2종, LED 중합기 2종, pulse-delay curing의 서로 다른 중합방법의 경우를 FTIR 분석법으로 복합레진의 물리적 기계적 성질 및 생체친화성에 영향을 미치는 중합률을 분석하여 다음과 같은 결과를 얻었다. 1. 광중합 복합레진의 중합률은 FTIR로 측정하였을 때 34.52-49.31%사이로 나타났으며 플라즈마 아크 중합의 경우 Flipo는 $39.96{\pm}1.22%$, CrediII는 $45.64{\pm}1.34%$로, 할로겐 중합시 XL3000은 $43.48{\pm}1.34%$, VIP의 mode 4 사용시는 $44.31{\pm}0.72%$, LED의 LUXOMAX는 $49.31{\pm}2.37%$, Elipar Freelight는 $44.51{\pm}0.62%$, pulse-delay curing시에는 $34.52{\pm}0.85%$로 나타났다. 2. 각 중합 방법별로 중합률은 LED 중합 방법을 이용한 LUXOMAX가 다른 실험군에 비하여 가장 높은 중합률을 나타냈으며 pulse-delay curing 방법이 가장 낮은 중합률을 보였다. 3. Flipo 중합기, LUXOMAX 중합기, pulse-delay curing 방법이 다른 중합기와 비교하여 통계적으로 유의한 차이를 보였다(p<0.05). 4. 각 중합방법이 동일한 군 내의 중합기기별 차이에서는 할로겐에서는 광중합기 사이에 중합률의 차이를 보이지 않았으나 플라즈마 아크에서는 CrediII가, LED에서는 LUXOMAX가 중합률이 높았다(p<0.05).

• 한국가금학회지
• /
• 제49권4호
• /
• pp.239-246
• /
• 2022

본 연구는 여름철 γ-aminobutyric(GABA)와 생균제 급여가 산란 종계의 생산성, 계란품질, 혈액 생화학 조성, corticosteron에 미치는 효과를 조사하였다. 24주령의 산란 종계 총 105수를 3개 처리(대조구, GABA, probiotics), 처리당 7반복, 반복당 5수로 설정하여 사양실험을 실시하였다. GABA와 생균제는 배합사료 내 각각 50ppm과 0.1%로 첨가하여, 총 6주간 실험을 실시하였다. 전기간 산란종계의 평균 계란 생산량, 산란량은 대조구보다 생균제 급여 처리구에서 유의적으로 높았으며(P<0.05), FCR은 생균제 급여 처리구에서 낮은 값을 나타내었다(P<0.05). 산란 종계 계란의 난중, 난백고 높이, Haugh units, 난황색, 난각두께, 난각강도에서 처리구간의 유의적인 차이를 보이지 않았다. 또한 모든 혈청 생화학 조성에서 유의적인 차이를 보이지 않았다. 혈청 내 corticosterone 농도는 GABA와 생균제 급여로 인하여 대조구보다 유의적으로 감소하였다(P<0.05). 따라서 GABA와 생균제 급여 시 고온기 산란 종계의 스트레스를 완화시킬 수 있는 것으로 사료되며, 특히 생균제 급여는 계란 생산성 및 산란량 성적을 개선할 수 있는 것으로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.873-879
• /
• 2003

The study was conducted to improve the nutritive value of defatted rice polishing (DRP). DRP was treated with various concentrations of HCl, NaOH, $H_2O_2$ and Kemzyme-H $F^{(R)} and the effect on its chemical composition and nutritive value in broiler chicks was observed. The treatments levels of 0.4 N HCl, 0.2 N NaOH and 6% $H_2O_2$ were selected from many concentrations of HCl, NaOH and $H_2O_2$ tried earlier on DRP. The selection was made on the basis of release of nutrients from DRP. The Kemzyme-H $F^{(R)} was used at rate of 0.1% of DRP. The selected concentrations of HCl, NaOH, and $H_2O_2$ were then used for treatment of DRP that was used in biological experiments. Two hundred and forty, day-old Hubbard male broiler chicks (38-40 g) were randomly divided into 48 experimental units with five chicks each. Each chemically treated DRP was incorporated into broiler diets at 10, 20 or 30% levels replacing yellow corn from the control feed and thus sixteen experimental feeds were prepared. These feeds were randomly assigned to 48 experimental units such that there were three replicates of chicks on each diet. The results of the study suggest that DRP can be effectively used in broiler diets at 20% level. The best weight gain and feed conversion ratio were observed with diet containing 20% level of DRP treated with 6% $H_2O_2$. The diets containing 30% levels of treated DRP were uneconomical, as excess use of oil was required to compensate the energy needs of the birds.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1629-1634
• /
• 2008

A trial was conducted to determine the effect of low crude protein (CP) diets with constant metabolizable energy to crude protein (ME:CP) ratio on growth, body composition and nutrient utilization of broiler chicks from 1 to 26 days of age. Four dietary treatments having four levels of CP and ME as 23, 22, 21 and 20% and 3,036, 2,904, 2,772 and 2,640 kcal/kg, respectively, were formulated and a ME:CP ratio of 132 was maintained in all the diets. Digestible lysine was maintained at 1.10 of the diet. A total of 1,760 day-old Hubbard broiler chicks were randomly divided into 16 experimental units and each diet was offered to four experimental units at random. Feed intake was increased (p<0.05) while weight gain and feed conversion ratio were adversely affected (p<0.05) when the diets with low CP and ME were fed to broilers. Total protein intake and total ME intake were linearly decreased (p<0.05) and protein efficiency ratio and energy efficiency ratio were lower (p<0.05) than in the chicks fed dietary regimen with 22% CP and 2,904 kcal/kg ME. The whole body analysis of the birds revealed that chicks fed the lowest dietary regimens retained less (p<0.05) nitrogen and more ether extract than chicks fed the control diet, however, body dry matter, total body ash and fat free body protein were not affected. Similarly, protein and energy utilization were also unaffected by the dietary treatments. In summary, chicks fed low CP diets with constant ME:CP ratio grew slower, used feed less efficiently and retained less protein and more body fat than chicks fed the control diet.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1207-1210
• /
• 2003

The effect of solvent structure on the slope in the plot of ln K vs. solute carbon number was examined. It was found that the free energy of methylene group transfer from the gas phase into a solvent was always negative and that the absolute magnitude of interaction free energy between the methylene group and the solvent was always larger than the absolute magnitude of cavity formation free energy of the methylene group in the solvent. Thus, the slope in the plot of ln K vs. solute carbon number was always positive and its value decreases with increase of solvent polarity since the cavity formation energy of the CH₂ unit increases with increase of solvent polarity while the dispersive interaction energy of the CH₂ unit is virtually invariant. We also examined the effect of sequential addition of CH₂ unit to a solvent molecule upon ln K for three homologous series of solvents: n-alkanes, n-alcohols, and n-nitriles. Characteristic trends in the plots of ln K vs. solvent carbon number were observed for individual solvent groups. A decrease of ln K with solvent carbon number was observed for n-alkanes. An abrupt increase in ln K followed by levelling off was observed for n-alcohols while a final slight decrease in ln K after an abrupt increase followed by rapid levelling off was noted for n-nitriles. All of theses phenomena were found related to variation in cavity formation energy. It was clearly shown that a structural change of a polar solvent by sequential addition of CH₂ units causes an abrupt polarity decrease initially, then gradual levelling off, and finally, conversion to a virtually nonpolar solvent if enough CH₂ units are added.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1861-1866
• /
• 2012

The new semiconducting copolymers with 4,4-dialkyl-$4H$-cyclopenta[2,1-$b$:3,4-$b^{\prime}$]dithiophene and 2,2-dimethyl-$2H$-benzimidazole units were synthesized. The fused aromatic rings, such as cyclopentadithiophene (CPDT) unit, can make the polymer backbone more rigid and coplanar, which induces long conjugation length, narrow band gap, and strong intermolecular ${\pi}-{\pi}$ interaction. The stacking ability was controlled through attaching of linear or branched alkyl side chains. The spectra of PEHCPDTMBI and PHCPDTMBI in the solid films show absorption bands with maximum peaks at 401, 759 and 407, 768 nm, and the absorption onsets at 925 and 954 nm, corresponding to band gaps of 1.34 and 1.30 eV, respectively. The devices comprising PHCPDTMBI with $TiO_X$ showed a $V_{OC}$ of 0.39 V, a $J_{SC}$ of 1.14 $mA/cm^2$, and a $FF$ of 0.34, giving a power conversion efficiency of 0.15%. The PHCPDTMBI with linear alkyl chain on CPDT shows good solubility in organic solvent with higher PCE value than that of PEHCPDTMBI.

• Imaging Science in Dentistry
• /
• 제39권3호
• /
• pp.115-120
• /
• 2009

Purpose : The purpose of this study was to determine a conversion coefficient for Hounsfield Units(HU) to material density ($g\;cm^{-3}$) obtained from cone-beam computed tomography ($CBMercuRay^{TM}$) data and to measure the hard tissue density based on the Hounsfield scale on dental head phantom. Materials and Methods : CT Scanner Phantom (AAPM) equipped with CT Number Insert consists of five cylindrical pins of materials with different densities and teflon ring was scanned by using the $CBMercuRay^{TM}$ (Hitachi, Tokyo, Japan) volume scanner. The raw data were converted into DICOM format and the HU of different areas of CT number insert measured by using $CBWorks^{TM}$. Linear regression analysis and Student t-test were performed statistically. Results : There was no significant difference (P > 0.54) between real densities and measured densities. A linear regression was performed using the density, $\rho$($g\;cm^{-3}$), as the dependent variable in terms of the HU (H). The regression equation obtained was $\rho=0.00072H-0.01588$ with an $R^2$ value of 0.9968. Density values based on the Hounsfield scale was $1697.1{\pm}24.9\;HU$ in cortical bone, $526.5{\pm}44.4\;HU$ in trabecular bone, $2639.1{\pm}48.7\;HU$ in enamel, $1246.1{\pm}39.4\;HU$ in dentin of dental head phantom. Conclusion : CBCT provides an effective option for determination of material density expressed as Hounsfield Units.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.407-412
• /
• 2003

An effective methodology is .reported for determining the optimal capacity (lot-size) of batch processing and storage networks which include material recycle or reprocessing streams. We assume that any given storage unit can store one material type which can be purchased from suppliers, be internally produced, internally consumed and/or sold to customers. We further assume that a storage unit is connected to all processing stages that use or produce the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. The objective for optimization is to minimize the total cost composed of raw material procurement, setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory hold-up. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two subproblems. The first yields analytical solutions for determining batch sizes while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks. For the special case in which the number of storage is equal to the number of process stages and raw materials storage units, a complete analytical solution for average flow rates can be derived. The analytical solution for the multistage, strictly sequential batch-storage network case can also be obtained via this approach. The principal contribution of this study is thus the generalization and the extension to non-sequential networks with recycle streams. An illustrative example is presented to demonstrate the results obtainable using this approach.