• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.3
• /
• pp.93-100
• /
• 1998

The ortho-para $H_2$ catalytic conversion equipment has been developed to reduce the evaporation loss from stored liquid hydrogen. The ortho-para $H_2$ conversion heat is evaluated at liquid nitrogen temperature. This problem is of particular interest in the design of the ortho-para $H_2$ converter in a hydrogen liquefaction system. The ortho-para $H_2$ conversion equipment consists of a catalytic converter, a precooler, and a liquid nitrogen bath. 30-90 cc of $Fe(OH)_3$ are employed as a catalyst in the present converter. The conversion heat and conversion effectiveness are evaluated when mass flow rate of hydrogen is in the range of 0.05-l.6 g/min. It is found that the ortho-para conversion heat is increased while conversion effectiveness is decreased as the mass flow rate of hydrogen is increased. Both the ortho-para conversion heat and conversion effectiveness are increased with an increase in the amount of the catalyst.

• Physical Therapy Korea
• /
• v.5 no.1
• /
• pp.51-62
• /
• 1998

Conversion disorder is defined as a specific and enduring sensorimotor dysfunction that contradicts known neurological or musculoskeletal pathology or physical findings. The patient with conversion symptoms unconsciously adopts these symptoms to convert their psychological stress to a physical phenomenon. Conversion disorder often involves the mimicry of organic symptoms similar to those experienced by a relative or an acquaintance. Because conversion symptoms are produced by psychological stress, specific treatment strategy and reinforcement program are needed for treatment. Treatment comprises avoiding unnecessary medical tests and removing symptoms by using graded exercises given by physical therapists. Clinical therapists must maintain a continuous and detailed follow-up to completely recover from conversion symptoms. The goal of treatment is to emphasize health rather than disease, to resolve physical symptoms, and to prevent recurrence. This study looks into the case reports of 4 patients diagnosed with conversion disorder.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.635-636
• /
• 2006

A pulse with modulation(PWM) that keeps a constant angle of dwell and adjust duty ratio is a good method to control a speed of SRM. And a method of one pulse control is proper a operation on range of high speed in SRM for a good energy efficiency. Because PWM method is more safety than one pulse method, conversion of those is best choice according the speed range. So, some algorithm is need for smooth conversion of the mode of control. This paper presents a factor of conversion that proper the conversion of control mode between PWM and one pulse method This factor is from estimation of torque and proper at the variable range of conversion and show the better conversion characteristic than constant factor of conversion.

• Phonetics and Speech Sciences
• /
• v.15 no.3
• /
• pp.69-74
• /
• 2023

This study introduces an innovative model for zero-shot voice conversion that utilizes the capabilities of HuBERT. Zero-shot voice conversion models can transform the speech of one speaker to mimic that of another, even when the model has not been exposed to the target speaker's voice during the training phase. Comprising five main components (HuBERT, feature encoder, flow, speaker encoder, and vocoder), the model offers remarkable performance across a range of scenarios. Notably, it excels in the challenging unseen-to-unseen voice-conversion tasks. The effectiveness of the model was assessed based on the mean opinion scores and similarity scores, reflecting high voice quality and similarity to the target speakers. This model demonstrates considerable promise for a range of real-world applications demanding high-quality voice conversion. This study sets a precedent in the exploration of HuBERT-based models for voice conversion, and presents new directions for future research in this domain. Despite its complexities, the robust performance of this model underscores the viability of HuBERT in advancing voice conversion technology, making it a significant contributor to the field.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.569-578
• /
• 2005

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on-chip 1 to 6 GHz up-conversion and 1 to 8 GHz down-conversion mixers using a 0.8 mm SiGe hetero-junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up-conversion mixer was implemented on-chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up-conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down-conversion mixer was implemented on-chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down-conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.78-85
• /
• 2008

Purpose: The capsular contracture has been the most common complication of augmentation with breast implant, a side effect quite difficult to treat. The latest trends in the correction of capsular contracture include total capsulectomy or conversion of implant pocket. In this study, in an attempt to correct capsular contracture, the authors performed reoperation which involved capsulectomy through peri-areolar approach and dual-plane conversion. The authors hereby report the clinical results of such correction of capsular contracture and examine the efficacy. Methods: The authors selected 46 patients who were admitted to the clinic from January 2004 to January 2007 (37 months), and performed dual-plane conversion through solely peri-areolar approach. Two types of operation were done: dual-plane conversion from subglandular plane or from submuscular plane. Results: The average follow-up time after conversion to the dual-plane position was 10 months. During the follow-up period, 83.1% of patients recovered from capsular contracture and were Baker class I, and in 10.9% the condition had relapsed into Baker class II or III contracture. Conclusion: This study has proven the effectiveness of the dual-plane conversion operation for correcting established capsular contracture after previous augmentation mammaplasty. In this study, all cases of dual-plane conversion operation was performed through peri-areolar approach, which can prevent the occurrence of visible scar on inframammary fold.

• Journal of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.440-444
• /
• 1977

The anionic polymerization of ${\varepsilon}$-caprolactam via $CS_2$/KOH catalysis was carried out under various conditions. The inherent viscosity of the polymers and percent conversion of the polymers were determined. It was observed that the percent conversion was increased as an increasing concentration of catalyst and initiator. The percent conversion was relatively low at low temperature and the highest percent conversion was obtained at temperature between $130^{\circ}C,\;to\;155^{\circ}C$ with any $CS_2$/KOH mole ratio.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.62-68
• /
• 2016

A chromium-free Ce-based conversion coating formed by immersion in a solution containing cerium chloride and nitric acid on AZ31 magnesium alloy has been studied. The effects of acid pickling on the morphology and the corrosion resistance of the cerium conversion coating were investigated. The corrosion resistance of the conversion coating prepared on AZ31 Mg alloy after organic acid pickling was better than that of inorganic acid pickling. The morphology of the conversion-coated layer was observed using optical microscope and SEM. Results show that the conversion coatings are relatively uniform and continuous, with thickness 1.0 to $1.1{\mu}m$. The main elements of the conversion coating of AZ31 Mg alloy are Mg, O, Al, Ce and Zn by EDS analysis. The electrochemical polarization results showed that the Ce-based conversion coating could reduce the corrosion activity of the AZ31 Mg alloy substrates in the presence of chloride ions.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.251-257
• /
• 1998

The equivalent lens conversion is extended to lens group conversion, and the more generalized conversion method is developed. The new conversion method can be used for hte direct thick-to-thick lens conversion. By using the equivalent lens conversion, a thin lens system can be converted into various thick lens system which have different axial thicknesses, but those converted lens systems have identical paraxial property and similar aberration characteristic. For an example, the equivalent lens conversion technique is applied to modification of a thelephoto lens design. The axial thicknesses of the front group elements of the system are reduced to 75% of their original values. The modified design by using the equivalent lens conversion has same focal length with original, and it has smaller aberration changes than the other design of which axial thicknesses are changed only.

• Journal of the military operations research society of Korea
• /
• v.33 no.1
• /
• pp.75-92
• /
• 2007

Most of countries in the world are stepping up military conversion to achieve military modernization. The issues of military conversion hold reallocation of financial resources, reorientation of R&D, restructuring of military industry, demobilization, base closure and relocation, scrapping of surplus weapons and so on. Also ROK is stepping up military modernization through defense reform. In particular, ROK has the plan to convert bases; transfering U.S. Forces in Korea and conducting the merger and abolition of bases. In this respect, we expect increase of base conversion easily in the future. Therefore, we tried to find the strategy of base conversion that ROK can conduct base conversion with success in this study. So that we analyze cases of base conversion which were conducted in ROK and U.S. Moreover, we extract problems of the process of base conversion in ROK and finally find out substitutes.