• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1369-1379
• /
• 2016

This research assessed the disparity in anion generation according to the vertical structure of a Zelkova Serrata tree for the purpose of creating a pleasant and green city environment. Measurements for the study were conducted between July and August of 2014 in Chung-ju in the central region of the Republic of Korea. The average anion generation of vertical structure trees during active photosynthesis periods was: L Section ($839.0ea/cm^3$) > M Section ($664.6ea/cm^3$) > U Section ($472.0ea/cm^3$). According to DMRT analysis, significant difference was found in the average between the L, or M Locations and the U Locations. During dormant photosynthesis periods, records showed that the anion production at the M Location ($1,212.5ea/cm^3$) > L Location ($1,050.4ea/cm^3$) > H Location ($844.1ea/cm^3$), According to DMRT analysis, the difference within each location was significant for ${\alpha}=0.05$. In a comprehensive analysis of the weather factors in each vertical structure, anion generation during active photosynthesis periods showed a positive correlation with solar radiation and a negative correlation with wind speed. Dormant photosynthesis periods showed negative correlations with both solar radiation and temperature, and positive correlations with relative humidity and wind speed. Predictions from a multicenter retrospective study showed that during active photosynthesis periods, $Y_1=282.443X_1+512.07$, and $Y_2=314.337X_1+16.913X_2$, while during dormant photosynthesis periods, $Y_1=391.009X_1+840.043$, and $Y_2=351.412X_1+32.765X_2$.

• 치위생과학회지
• /
• 제23권3호
• /
• pp.193-198
• /
• 2023

Background: The nose is located at the center of the face, and it is possible to determine race, sex, and the like. Research using the nasal index (NI) classification method to classify the shape of the nose is currently in progress. However, domestic research is required as most research is being conducted abroad. In this study, we used a 3D program to confirm the ratio of the nose shape of Koreans. Methods: One hundred patients (50 males and 50 females) in their 20s were evaluated (IRB approval no. DKUDH IRB 2020-01-007). Cone beam computed tomography was performed using the Mimics ver.22 (Materialise Co., Leuven, Belgium) 3D program to model the patient's skull and soft tissues into three views: coronal, sagittal, and frontal. To confirm the ratio of measurement metrics, analysis was performed using the SPSS ver. 23.0 (IBM Co., Armonk, NY, USA) program. Results: Ten leptorrhine (long and narrow) type, 76 mesorrhine (moderate shape) type, and 14 platyrrhine (broad and short) type noses were observed. In addition, as a result of sex comparison, five males had the leptorrhine (long and narrow) type, 40 mesorrhine (moderate shape), and five platyrrhine (broad and short) types. For females, five patients had the leptorrhine (long and narrow) type, 36 patients had the mesorrhine (moderate shape) type, and nine patients had the platyrrhine (broad and short) type. Conclusion: This study will be helpful when performing nose-related surgeries and procedures in clinical practice and for similar studies in the future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.166-178
• /
• 1991

Using FLAC, which is an explicit finite difference code written for analysis of problems in geotechnical engineering, a particular example 2 in the Korean Geothechnical Society News has been analysed. The elastoplasticity formulation in FLAC assumes an elastic, perfectly plastic solid in plane strain which conforms to a Mohr-Coulomb yield condition. During tunnel excavations by stages, stresses and diaplacements in region around the tunnel varies according to distance from the face of tunnel and installation of tunnel supports, and soon. In this analysis, the three dimensional support effect of the rock mass during the process of excavation is simulated by using the stress distribution method, and varying the material constants of shotcrete in each stage also considered. The maximum convergency is occured at the crown of the tunnel and estimated to be about 12mm.

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.394-402
• /
• 1999

In this paper, we present an effective RLS algorithm with forgetting factor of Erlang function for the system identification. In the proposed algorithm, the forgetting factor decreases monotonically in the first stage, and then it increases monotonically in the second stage in contrary to the conventional forgetting factor RLS algorithms. In addition, annealing effect and an asymptotically stability of the proposed algorithm is discussed based on the analysis of convergency property on. Simulation results for the system identification problem indicate the superiority of the proposed algorithm in comparison to the RLS algorithm such as NLMS and Kalman filter based algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1822-1825
• /
• 2003

A practical range estimator based on the robust Kalman filter is proposed to solve the range estimation problem for surface to air missile(SAM) homing guidance. Apart from the previous works based on the extended Kalman filter(EKF) with bearing only measurement, the proposed scheme makes use of line-of-sight(LOS) rate to ensure the fast convergency at long-range. In this reason, the robust Kalman filter is considered to deal with LOS rate measurement error. The recursive linear structure of proposed filter is easy to implement and make it possible to reduce computational burdens. Moreover, it shows good estimation performance without specific guidance law such as oscillation proportional navigation guidance(OPNG).

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.52-62
• /
• 1995

We developed a two-dimensional numerical simulator which can analyze the electrical as well as optical characteristics and evaluate the detection performances of self-signal processing infrared detectors. It solves the poisson equation and the electron, hole current continuity equations including the optical generation and recombination models. To speed up convergency rate. the Newton algorithm is used. Automatic triangular grid generator make it easy to simulate the devices with the various read-out geometries. This simulator can show the variation of spatial resolution which is caused by the transit velocity and transit time dispersion in bifurcate and horn geometries respectively. Also, we calculated the responsivity, noise, and detectivity in respect of the applied electric field and background field-of-view. The results obtained from simulation correspond to those of experiments, and it is verified that horn read-out geometry has the superior spatial resolution and detection performance to bifurcate geometry.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제45권1호
• /
• pp.25-34
• /
• 2006

In this paper, we focus on the creative attitude in mathematics as one aspect of mathematical creativity. To measure the creative attitude, we first introduce some prior studies and CAS (Creative Attitude Scale) designed by Noboru Saito in Japan. We develop the CAS-K (Creative Attitude Scale-Korea) including 33 items of 7 factors based on CAS which has 27 items. The factors are fluency, appropriateness, positiveness, independency, concentration, convergency, and accuracy. In CAS-K, it is important to give the information about students' creative attitude for each factor. Thereby, CAS-K can be useful sources of creative attitude to foster mathematical creativity. Rather than the total scores, we emphasize applications and results from CAS-K relating to the 7 factors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.510-515
• /
• 2004

A proton exchange membrane fuel cells(PEMFC) operate at low temperature, allowing for faster startups and immediate response to change in the demand for power, and also deliver high power density. To maximize economical efficiency in PEMPC, it is necessary to the optimization. Response surface method(RSM) has non-gradient and fast convergency characteristics. Sampling points are extracted by design of experiments using Central Composite Method. In this paper, it is shown that the optimization is required for the design study of the PEMFC.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.507-512
• /
• 2006

There are many risks in constructing tunnel-structure. To prevent these risks from occurring and secure safety, the precise and rapid survey of inside displacement of the tunnel is required. But nowadays the measurement of the crown settlement, convergency, and surface settlement depends on general kinds of method which use total station or level. In the way to provide data about maintaining structure according to recent improvement and progress of measuring technology, 3D laser scanning is used. It solves the problem of reliability in measuring displacement of existing structure, provides material that enables to estimate shape change of structure visually, and makes it possible to deliberate speedy countermeasure. By this three dimensioning it is possible to make efficient use of structure maintenance and field measurement

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.206-211
• /
• 1993

The explicit scheme for finite element analysis of sheet metal forming problems has been widely used for providing practical solution since it improves the convergency problem,memory size and computational time especially for the case of complicated geometry and large element number. In the present work, a basic formulation for rigid-plastic explicit finite element analysis of plain strain sheet metal forming problems has been proposed. The effect of some basic parameters involved in the dynamic analysis has been studied in detail. A direct trial-and-error method is introduced to treat contact and friction. In order to show the validity and effectiveness of the proposed explicit scheme, computation are carried out for cylindrical punch stretching and the computational results are compared with those by the implicit scheme as well as with a commercial code. The proposed rigid-plastic explicit element method can be used as a robust and efficient computational method for analysis of sheet method forming.