• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.70-75
• /
• 2021

We developed a platform that was capable of autonomous steering in a furrow environment. It was developed to autonomously control steering by recognizing the furrow using a laser distance, three-axis tilt, and temperature sensor. The performance evaluation indicated that the autonomous steering success rate was 99.17%, and it was possible to climb up to 5° on the slope. The usage time was approximately 40 h, and the maximum speed was 6.7 km/h.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.92-97
• /
• 2022

In this paper, as a research on autonomous steering for agriculture, a sensor module for furrow recognition was developed through a low-cost distance sensor combination. The developed sensor module was applied to the vehicle, and when driving in a furrow curve, the autonomous steering success rate was 100% at a curvature of 20 m or more, and 70% at a curvature of 15 m or less. The self-steering success rate according to the ground condition showed a 100% success rate regardless of soil, weeds, or mulching film.

• International Commerce and Information Review
• /
• v.17 no.1
• /
• pp.165-191
• /
• 2015

The results of this study are the two. First, for convergence technology and convergence technology transfer based on analysis of previous studies I suggested a framework for convergence-type technology transfer conceptualization and measurement. Second, I am compared convergence-type technology transfer to total technology transfer from public research(university and public institute) to SME. Overall, despite the trend to increase technology transfer to SMEs, convergence-type technology transfer is only 4.4%. Both total technology transfer and convergence-type technology transfer to the Industry is active to electronic components, machinery, chemicals, food and beverage, and the medical. The role of universities is emphasized in both total technology transfer and convergence-type technology transfer. There are small transactions of less than 5 million in both total technology transfer and convergence-type technology transfer. Both total technology transfer and convergence-type technology transfer to the region are concentrated in Seoul, Daejeon and Gyeonggi-do.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.2
• /
• pp.191-202
• /
• 2003

The objective of this study is to examine the existence of technology gap convergence between manufacturing sector and Grand Total over 1970 to 2000 under nonlinearity relationship in Korea. We use the concept of technology convergence as the stationarity test of technology gap over the relevant periods. Our empirical results provide two important implications for the future study: First, our empirical results strongly support the nonlinearity for technology convergence in our country and an empirical tests based on the assumption of linearity will be biased and wrong industry and economic policy implications. Second, we find two regimes i.e. technology convergence and technology divergence between manufacture sector and Grand Total in our country over 1970 to 2000. These study results imply that the relevant industry and economic policies for technology and R&D implementations be with a causation.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.157-162
• /
• 2017

In large liquid crystal displays, the image quality in an oblique viewing direction is a crucial issue. From this perspective, 8-domain polymer-stabilized vertical alignment (PS-VA) mode has been developed to suppress the color shift in oblique viewing directions, compared to that in 4-domain PS-VA mode. To realize the 8-domain PS-VA, the four domains in a pixel are each divided into two regions, such that applying different electric potentials result in different tilt angles in these two regions, while keeping four azimuthal directions in each domain. However, applying different voltages in a pixel causes drawbacks, such as requiring additional processes to construct a capacitor and a transistor, which will further reduce the aperture ratio. Here we propose a different approach to form the 8-domain, by controlling surface polar anchoring energy and the width of patterned electrodes in two regions of a pixel. As a result, the gamma-distortion index (GDI), measured at an azimuthal angle of $0^{\circ}$, is reduced by about 23% and 8%, compared to that of a conventional 4-domain at polar angles of $30^{\circ}$ and $60^{\circ}$ respectively.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.66-71
• /
• 2019

Application of liquid crystal (LC) materials to a flexible device is challenging because the bending of LC displays easily causes change in thickness of the LC layer and orientation of LCs, resulting in deterioration in a displayed image quality. In this work, we demonstrate a prototype device combining a flexible polymer substrate and an optically isotropic LC-polymer composite in which the device consists of interdigitated in-plane switching electrodes deposited on a flexible colorless polyimide substrate and the composite consisting of nano-sized LC droplets in a polymer matrix. The device can keep good electro-optic characteristics even when it is in a bending state because the LC orientation is not disturbed in both voltage-off and -on states. The proposed device shows a high potential to be applicable for future flexible LC devices.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.1-35
• /
• 2014

This study analyzed convergence status among input technologies used in technology development with Technology I-O analysis. It was another version of industry input-output analysis which is used in technology planning. This case is an analysis of association between technology an product. The subjects of analysis were 401 tasks that applied to '2012 Convergence Technology Development Project for Small and Medium Businesses' promoted by Korea Technology & Information Promotion Agency for Small and Medium Enterprises. The process of analysis is as followed. First step, we made a matrix table as an input of technology input-output analysis. Input was defined by technology and output was defined by the product. Input technology was defined in a 3-digit code under National Science Technology Classification and output products were defined in a 5-digit under National Standard Industry Code. Second, the Spillover ratio among technologies were calculated and was used to make a picture of technology linkage. As a result of analysis, technology spillover of embedded S/W was the highest in IT convergence, mold product in ET convergence, and functional cosmetics development technology in BT convergence. In general, IT convergence had many element technologies with high technology spillover, and ET had a small number of element technologies with high technology spillover. Therefore, investment effect of element technology is expected to be large if investment on element technologies with high technology spillover is important for vitalizing convergence.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.133.2-133.2
• /
• 2014

A gap surface plasmon resonator have received considerable attention because it can dramatically enhance the absorption of the electromagnetic field. However, whereas most of studies were just focused on the absorption within a narrow range of wavelength, few studies have been performed for the broadband absorption in the visible range. Therefore, in this study, we discuss methods that can induce broadband light absorption using gap plasmon resonance in visible regime. The gap plasmon resonator will offer great potential for appplications to solar cells and bioimaging.

• The Research Journal of the Costume Culture
• /
• v.16 no.1
• /
• pp.88-99
• /
• 2008

This study aims to analyze product samples of convergence of fashion and technology, as convergence is a major trend in the age of digital paradigm, and to propose desirable directions of development for technology convergence in fashion design in the future. With bibliographic research as well as internet search of the cases of development and commercialization of convergence of fashion and technology from the 1960s, when wearable computers were first introduced as an early development form of convergence, to the present, it becomes possible to classify these cases into three groups: functionally oriented one, aesthetically oriented one, and one that combines function and aesthetics. The pros and cons of each group of these cases are discussed and an evolutionary trend is observed from the earlier stage of convergence with functionally oriented cases which tried to achieve specific purposes of the time to the later stage of convergence with emphasis on both function and aesthetics which reflects the sensitivity of the general wearers. When three groups are plotted in the positioning map with one axis of function-aesthetics and the other of industry-fashion designer, however, all three are located outside of the two axes, suggesting these elements are not very well combined. In order for the products of the fashion-technology convergence in the future to receive favorable response from the consumers, it is necessary for the fashion industry to develop a close collaboration with companies of digital technology and the convergence products not only will have to provide functional benefits of the new technology but also to satisfy the aesthetic demands of the wearers.

• Convergence Security Journal
• /
• v.15 no.3_2
• /
• pp.77-82
• /
• 2015

IT convergence has been approached from national strategic dimension with an aim to drive forward technology development and industrial advancement in other fields by taking the IT to the next advanced level, and has been the focus of intensive investment of research resources. Against this backdrop, IT convergence has emerged as a cutting-edge convergence industry that helps spur development of new growth engine being pushed forward at inter-ministerial level, as well as help turn the mainstay industries into high value-added industries and create new IT industry. Health-related convergence services have shifted its focus towards the exercise/sports and rehabilitation-oriented entertainment experiential industry away from conventional disease prevention and control-centric treatment/therapy technology industry. Thus, this study was intended to examine the trends of IT convergence technological development related to health exercise and present recommendation on the future course for development of major technologies and advancement of convergence industry, given the importance assigned to IT convergence.