• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.125-127
• /
• 2013

해상교통관제시스템(Vessel Traffic System: VTS)에서는 해상 사건/사고를 사후 확인하거나 해상 교통량 확인을 위해 사용하기 위한 목적으로 VTS에서 발생하는 데이터를 저장 및 관리한다. 특정 지역에 대한 장시간 교통량 확인에서는 녹화된 재생 데이터를 고속 배속으로 실행시켜 살펴보는 것이 시간 단축에 큰 도움이 된다. 그런데 일반 영상이 아닌 VTS 서브 시스템간 주고 받은 메시지와 영상이 포함된 VTS 녹화재생에서는 고속 배속을 지원하는데 자연스럽지 않은 문제점이 발생하고 있다. 따라서 본 논문에서는 VTS 녹화재생 기능이 고속 배속을 지원하기 위해 필요한 요구사항을 분석한다.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.3-10
• /
• 1999

Recently, It is proceeding the project of offshore structures in the many contury. A hybrid boundary-integral method is developed for computing wave forces on floating bodies. In this method, using the cylindric boundary for deviding elements, it is convenient to analysis but is difficult to apply to the rectangular or slender bodies. Thus, in this paper, I propose the new method by using the fictitious vertical cylinder of arbitary cross-section and shows results of the numerical analysis for testing.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_1
• /
• pp.411-419
• /
• 2021

In this study, IGBT_Total_Loss and DIODE_Total_Loss were used to analyze the slope of the junction temperature for each section for temperature and duty variables in order to simply calculate the junction temperature of the power semiconductor (IGBT). As a result of the calculation, IGBT_Max_Junction_Temp and DIODE_Max_Junction_Temp form a proportional relationship with temperature for each duty. This simulation data shows that the power loss of a power semiconductor is calculated in a complex manner according to the current dependence index, voltage dependence index, and temperature coefficient. By applying the slope for each condition and section, the junction temperature of the power semiconductor can be calculated simply.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.397-409
• /
• 2023

This study examines two traditional approaches (non-linear elastic and elasto-plastic) in association with 2D and 3D FEM analyses of a box-section pile embedded in sand. A particular emphasis is placed on stress singularities concerning both reentrant corners of the pile section and the resulting tension zones. From the experience gained in this study, non-linear elastic soil models are less restrictive when one considers stress singularities and their possible effects on convergence of the solution. At least for monotonic loading, when compared with field tests, non-linear elastic models yield better results than the plasticity ones. On the other hand, although elasto-plastic models are not limited to monotonic loading, they are much more sensitive to stress singularities. For this reason, a spherical elastic region is necessary at the pile tip to ensure convergence. Without this region, one must artificially impose an apparent cohesion to limit the tension stresses within a sand medium.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.1-8
• /
• 2022

In Korea, drones, which are at the core of the 4th industrial revolution, are used to promote Korean New Deal policies to digitalize the SOC. Overseas, the use of convergence sensors, such as thermal imaging cameras, on drones is increasing in various industrial fields. In this research, to improve pavement quality in highway bridge pavement construction, a thermal imaging camera was mounted on a drone to measure and verify the temperature of the pavement work section. Using a laser thermometer allows the partial measurement of pavement temperature. It was confirmed that the proposed method allows not only real-time temperature monitoring of the whole pavement work section but also uniformity verification by checking temperature distribution. The proposed method has the potential to control highway pavement quality and enable quick decision-making on traffic opening times by reducing the possibility of misjudging road opening times(pavement surface temperature ≦ 40℃).

• ETRI Journal
• /
• v.28 no.5
• /
• pp.648-651
• /
• 2006

In this letter we present a right-angle-bent coplanar waveguide (CPW) which we developed for the application of the driver amplifier-integrated (DAI) 40 Gbps traveling wave electroabsorption modulated laser module. The developed CPW realized parallel progression of the radio frequency (RF) and light using a dielectric overlay structure and wedge bonding on the bending section. The measured $S_{11}$ and $S_{21}$ of the developed CPW were kept below-10 dB up to 35 GHz and -3 dB up to 43 GHz, respectively. These measured results of the CPW were in good agreement with the simulation results and demonstrated the applicability of the CPW to the 40 Gbps communication module.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.545-554
• /
• 2006

A widely tunable multi-channel grating cavity laser is proposed and experimentally demonstrated. The device is implemented in Littman configuration with an echelle grating based on Rowland circle construction and realized by monolithically integrating all elements in an InP substrate. Lasing wavelength is selected by turning on an amplifier and the appropriate channel element in the array, and it is tuned by controlling light deflection electrically. The 6-channel device exhibits a tuning range of about 50 nm with a side mode suppression ratio of more than 30 dB. This is accomplished by adjusting the applied current of the dispersive element and phase control section.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.835-855
• /
• 2021

With the recent increase in data disclosure, the Comprehensive Knowledge Archive Network (CKAN), which is an open-source data distribution platform, is drawing much attention. CKAN is used together with additional extensions, such as Datastore and Datapusher for data management and Harvest and DCAT for data collection. This study derives the problems of CKAN itself and Harvest Extension. First, CKAN causes two problems of data inconsistency and storage space waste for data deletion. Second, Harvest Extension causes three additional problems, namely source deletion that deletes only sources without deleting data themselves, job stop that cannot delete job during data collection, and service interruption that cannot provide service, even if data exist. Based on these observations, we propose herein an improved CKAN that provides a new deletion function solving data inconsistency and storage space waste problems. In addition, we present an improved Harvest Extension solving three problems of the legacy Harvest Extension. We verify the correctness and the usefulness of the improved CKAN and Harvest Extension functions through actual implementation and extensive experiments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.335-340
• /
• 2013

In this study, the plasma etching of the TaN thin film with $CH_4/BCl_3/Ar$ gas chemistries was investigated. The etch rate of the TaN thin film and the etch selectivity of TaN to $SiO_2$ was studied as a function of the process parameters, including the amount of $CH_4$. X-ray photoelectron spectroscopy (XPS) and Field-emission scanning electron microscopy (FE-SEM) was used to investigate the chemical states of the surface of the TaN thin film.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.49-55
• /
• 2015

In the FTA environment, it is necessary to comply with the rules of origin in order to receive duty-free benefits. To do this, they have to precede the Harmonized System(HS) tariff classification of the goods and understand thoroughly the basic principles that constitute the tariff schedule of HS classification. For the correct classification, they should understand exactly the product name of "Heading" about the items, "Legal Note" in the relevant "Section" or "Chapter" as well as provisions of the commentary. Therefore, this paper proposes to develop a HS classification services based on the performance system of knowledge convergence of field terms commonly used in various industries. In result, our services can provide users the conveniences which users first selects one of seven decision elements of the classification and perform the classification easily and accurately.