• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.325-331
• /
• 2022

In this study, austenitic 316L stainless steel was rolled at three different temperatures (100℃, -50℃, -196℃) at five rolling degree (0, 16, 33, 50, 66 and 80%). The rolled specimen was examined for micro structure, and the volume fraction and mechanical properties were evaluated. In particular, the rolling specimen detected the elastic wave generated in tensile and investigated the relationship between the rolling degree and the dominant frequency. As the rolling degree increased, austenite decreased and martensite increased. The volume fraction of martensite more increased at lower temperatures, but increased rapidly at the rolling degree of 50% of all rolling temperature. Tensile strength increased rapidly with the increase of the rolling degree, and was larger at lower temperatures. The elongation decreased sharply to the rolling degree of 33%, but decreased gently thereafter. The dominant frequency highly appeared as the volume fraction of martensite increased, but the dominant frequency was higher at the low temperature rolling temperature. A similar trend was also observed in the relationship between tensile strength and dominant frequency.

• Carbon letters
• /
• 제26권
• /
• pp.95-101
• /
• 2018

• ETRI Journal
• /
• 제32권4호
• /
• pp.626-629
• /
• 2010

In this letter, we present an enhanced block-based adaptive loop filter (E-BALF) with multiple filter symmetric structures. The E-BALF adapts various filter symmetric structures in a rate-distortion optimization sense, reflecting the statistical properties of each image in a video sequence. Experimental results show that the proposed method achieves a reduction in the Bj${\phi}$ntegaard delta (BD)-bitrate by an average of 9.60% compared with Joint Model 11.0 of H.264/AVC. Compared to the state-of-the-art BALF, a reduction of up to 1.13% in BD-bitrate is achieved.

• 대한수학회보
• /
• 제57권6호
• /
• pp.1451-1473
• /
• 2020

Widely orthant dependence (WOD, in short) is a special dependence structure. In this paper, by using the probability inequalities and moment inequalities for WOD random variables, we study the L_p convergence and complete convergence for the partial sums respectively under the conditions of RCI(α), SRCI(α) and R-h-integrability. We also give an application to nonparametric regression models based on WOD errors by using the L_p convergence that we obtained. Finally we carry out some simulations to verify the validity of our theoretical results.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 춘계학술발표대회
• /
• pp.1062-1065
• /
• 2010

Plasma 물성 데이터는 Plasma내에서 일어나는 입자(전자, 원자, 이온, 분자 등)들의 충돌에 대한 데이터로써 Plasma 발생 장치 설계 및 제어의 핵심 요소이며, Plasma 공정조건 확립을 위한 필수 정보가 된다. 참조표준은 과학기술데이터나 정보에 대하여 정확도와 신뢰도에 대한 분석 및 평가가 이루어진 공인데이터를 말한다. 이러한 플라즈마 물성 정보를 체계적으로 관리하고 신뢰성 있는 데이터를 필요로 하는 산업체에 지원하기 위하여 특정 참조표준과 참조데이터로 제정, 보급하는 Plasma 물성 참조표준 수집평가 시스템이 필요하고, 이에 대한 설계가 필요하다.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.663-670
• /
• 2018

H13 tool steels are widely used as metallic mold materials due to their high hardness and thermal stability. Recently, many studies are undertaken to satisfy the demands for manufacturing the complex shape of the mold using a 3D printing technique. It is reported that the mechanical properties of 3D printed materials are lower than those of commercial forged alloys owing to micropores. In this study, we investigate the effect of microstructures and defects on mechanical properties in the 3D printed H13 tool steels. H13 tool steel is fabricated using a selective laser melting(SLM) process with a scan speed of 200 mm/s and a layer thickness of $25{\mu}m$. Microstructures are observed and porosities are measured by optical and scanning electron microscopy in the X-, Y-, and Z-directions with various the build heights. Tiny keyhole type pores are observed with a porosity of 0.4 %, which shows the lowest porosity in the center region. The measured Vickers hardness is around 550 HV and the yield and tensile strength are 1400 and 1700 MPa, respectively. The tensile properties are predicted using two empirical equations through the measured values of the Vickers hardness. The prediction of tensile strength has high accuracy with the experimental data of the 3D printed H13 tool steel. The effects of porosities and unmelted powders on mechanical properties are also elucidated by the metallic fractography analysis to understand tensile and fracture behavior.

• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.442-448
• /
• 2021

In this work, the (K_1-xAg_x)(Ta_0.8Nb_0.2)O₃ (x=0.1-0.4) ceramics were fabricated using mixed-oxide method, and their structural and electrical properties were measured. All specimens represented a pseudo cubic structure with the lattice constant of 0.3989 nm. When 0.4 mol of Ag was added, second phases induced from metallic Ag and K₂(Ta,Nb)₆O₁₆ phase were observed. Dielectric constant and dielectric loss of K(Ta_0.8Nb_0.2)O₃ specimen doped with 0.3 mol of Ag were 2,737 and 0.446, respectively. The curie temperature was about -5℃, which does not change with Ag addition. The remanent polarization began to decrease sharply around 12~15℃, and the temperature at which the remanent polarization began to decrease as the applied voltage increased shifted to the high temperature side. The electrocaloric effect (ΔT) and electrocaloric efficiency (ΔT/ΔE) of the (K_0.7Ag_0.3)(Ta_0.8Nb_0.2)O₃ ceramics were 0.01024℃ and 0.01825 KmV^-1, respectively.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.275-279
• /
• 2023

La_0.7Sr_0.3-xMg_xMnO₃ (LSMMO) (x=0.05~0.20) specimens are fabricated by a solid phase sintering method, and the sintering temperature and time are 1,300℃ and 2 hours, respectively. The dependence of the crystalline structure according to the amount of Mg²⁺ contents is not observed, and all specimens show a polycrystalline rhombohedral crystal structure, the X-ray diffraction (110) peaks move to the high angle side with increasing the amount of Mg²⁺ contents. LSMMO specimens exhibit a granule-shaped microstructure with an average grain size of 1 ㎛ or less. Resistivity gradually decrease as the amount of Mg²⁺ contents increased. And in the La_0.7Sr_0.1Mg_0.2MnO₃ specimen, resistivity and B_25/65-value are 36.7 Ω-cm and 394 K at room temperature, respectively. LSMMO specimens show a variable-range hopping (VRH) electrical conduction mechanism, and the negative temperature of coefficient of resistance (NTCR) is approximately 0.37~0.38%/℃.

• 한국경영과학회지
• /
• 제12권1호
• /
• pp.10-18
• /
• 1987

This paper discusses algorithmic properties of a class of complementarity programs involving strictly diagonally isotone and off-diagonally isotone functions, i. e., functions whose Jacobian matrices have positive diagonal elements and nonnegative off-diagonal elements, A typical traffic equilibrium under elastic demands is cast into this class. Algorithmic properties of these complementarity problems, when a Jacobi-type iteration is applied, are investigated. It is shown that with a properly chosen starting point the generated sequence are decomposed into two converging monotonic subsequences. This and related will be useful in developing solution procedures for this class of complementarity problems.

• 한국통신학회논문지
• /
• 제18권6호
• /
• pp.815-823
• /
• 1993

본 논문에서는 곱셈연산이 필요치 안은 변형 비적 적응필터(MMADF : Modified Multiplication-free adaptive Filter) 알고리즘을 제안하고 수렴특성을 해석하였다. 제안한 구조는 DPCM(Differential Pulse Code Modulation)과 Sign 알고리듬을 이용한 MADF 구조에서 1차 필터를 첨가한 구조이다. 해석방법은 계수 비정렬벡터와 그 자기상관행렬의 수렴을 유도하였다. 수렴특성을 평가하기 위하여 분할등기(FSE : Fractionally Spaced Equallizer)에 적용하였으며, Sign 알고리듬, MADF 알고리듬, MMADF 알고리듬을 사용하여 정상상태오차와 수렴속도로 특성을 비교평가 하였다. MMADF 알고리듬을 FSE에 적용한 결과 안정된 수렴특성을 나타내었으며, 동일한 정상상태오차를 갖는 조건에서 시뮬레이션한 결과 기존의 Sign 및 MADF 알고리듬에 비해 신호특성 및 수렴속도가 개선 되었다.