• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.383-395
• /
• 2021

The purpose of this study is based on Pine and Gilmore's (1998) Experiential Economic Theory (4E's). This study mediates the perceived value of the experience factors (entertainment, aesthetic, deviant and educational experience) of Untact fashion and beauty performances. The impact on customer satisfaction was analyzed a total of 230 questionnaires were collected for visitors to the 15th Untact 'Asia Model Festival', which were successfully held in Seoul in 2020. The statistical analysis method used the SPSS 21.0 statistical program. As a result of the study, it was found that the experience factors had a significant effect on perceived value and customer satisfaction. In addition, perceived value was found to have a significant effect on customer satisfaction, and perceived value as a parameter was found to partially mediate the effect of experience factors on customer satisfaction. By studying the empirical analysis in this way, practical implications were presented and basic data that could be used for reference to related research were provided. However, future research should contribute to academic development through research on variables not covered in this research, and research on various untact performances should be continued.

• Korean small business review
• /
• v.42 no.3
• /
• pp.145-172
• /
• 2020

This study shows that it is favorable for Korean companies to maintain fairness and authenticity trading relationship with trading companies. It suggests that a positive reputation can be secured, trust relationships can be built, and transaction costs can be reduced. For this purpose, research hypothesis was established, questionnaires were collected for domestic companies, and a hypothesis test was conducted. As a result of the research hypothesis test, the perception of transaction fairness and the perception of transaction authenticity have a positive effect on reputation, and the reputation has a positive effect on trust. Trust has a positive effect on the reduction of transaction costs, and reputation and trust play a role in the perception of transaction fairness and transaction authenticity and the reduction of transaction cost, and trust is a parameter between reputation and reduction in transaction cost. Do it. In order for sustainable management activities to be carried out for Korean companies, it is necessary to improve fairness and authenticity in business relations. It is important to have a positive reputation. It has been demonstrated that securing a positive reputation can develop into a trust relationship and ultimately lead to a decrease in transaction costs.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.109-116
• /
• 2021

Traditionally, the engineering field has been dominated by face-to-face education focused on experimental practice, but demand for online learning has soared due to the rapid development of IT technology and Internet communication networks and recent changes in the social environment such as COVID-19. In order for efficient online education to be conducted in the engineering field, where the proportion of experimental practice is relatively high compared to other fields, virtual laboratory practice content that can replace actual experimental practice is very necessary. In this study, we developed a line tracer model and a virtual experimental software to simulate it for efficient online learning of microprocessor applications that are essential not only in the electric and electronic field but also in the overall engineering field where IT convergence takes place. In the developed line tracer model, the user can set various hardware parameter values in the desired form and write the software in assembly language or C language to test the operation on the computer. The developed line tracer virtual experimental software has been used in actual classes to verify its operation, and is expected to be an efficient virtual experimental practice tool in online non-face-to-face classes.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.515-524
• /
• 2022

The turnout system of the sleeper floating tracks (STEDEF) on urban transit is a Anti-vibration track composed of a wooden sleeper embedded in a concrete bed and a sleeper resilience pad under the sleeper. Therefore, deterioration and changes in spring stiffness of the sleeper resilience pad could be cause changes in sleeper support conditions. The damage amount of manganese crossings that occurred during the current service period of about 21 years was investigated to be about 17% of the total amount of crossings, and it was analyzed that the damage amount increased after 15 years of use (accumulated passing tonnage of about 550 million tons). In this study, parameter analysis (wheel position, sleeper support condition, and dynamic wheel load) was performed using a three-dimensional numerical model that simulated real manganese crossing and wheel profile, to analyze the damage type and cause of manganese crossing that occurred in the actual field. As a result of this study, when the voided sleeper occurred in the sleeper around the nose, the stress generated in the crossing nose exceeded the yield strength according to the dynamic wheel load considering the design track impact factor. In addition, the analysis results were evaluated to be in good agreement with the location of damage that occurred in the actual field. Therefore, in order to minimize the damage of the manganese crossing, it is necessary to keep the sleeper support condition around the nose part constant. In addition, by considering the uniformity of the boundary conditions under the sleepers, it was analyzed that it would be advantageous to to replace the sleeper resilience pad together when replacing the damaged manganese crossing.

• Journal of Powder Materials
• /
• v.30 no.4
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.184-191
• /
• 2022

Underwater acoustic wave in shallow water is propagated through multipath that has a large delay spread causing Inter-Symbol Interference (ISI) and these characteristics deteriorate the performance in the communication system. In order to analyze the communication performance and investigate the correlation with multipath delay spread in a reverberant environment, an underwater acoustic communication experiment using Binary Phase-Shift Keying (BPSK) signals with symbol rates from 100 sym/s to 8000 sym/s was conducted in a 5 × 5 × 5 m³ water tank. The acoustic channels in a well-controlled tank environment had the characteristics of dense multipath delay spread due to multiple reflections from the interfaces and walls within the tank and showed the maximum excess delay of 40 ms or less, and the Root Mean Squared (RMS) delay spread of 8 ms or less. In this paper, the performances of Bit Error Rate (BER) and output Signal-to-Noise Ratio (SNR) were analyzed using four types of communication demodulation techniques. And the parameter, Symbol interval to Delay spread Ratio in reverberant environment (SDR_rev), which is the ratio of symbol interval to RMS delay spread in the reverberant environment is defined. Finally, the SDR_rev was compared to the BER and the output SNR. The results present the reference symbol rate in which high communication performance can be guaranteed.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.669-676
• /
• 2023

This study analyzed the relationship between major parameters and numerical analysis results according to various excavations conducted around the urban railway, application of machine learning techniques and verified the scope of influence of the adjacent excavation on the existing urban railway box structure and the appropriateness of the safety area. This study targeted the actual negotiated adjacent excavation works and box structures around the urban railway, and the analysis was conducted on the most representative two-line box structures. The analysis confirmed that the difference in depth of urban railway, excavation depth of adjacent excavation, and depth of underground water level are important parameters, and the difference in excavation depth of adjacent excavation is the parameter that affects the behavior of underground box structures and is an important requirement for setting safety areas. In particular, the deeper the depth of the adjacent excavation work, the greater the effect on the deflection of the underground box structure, and the horizontal separation distance, one of the important requirements for determining the management grade of the existing adjacent excavation work, is relatively small.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.249-259
• /
• 2018

This research had intended to find out regarding the present influences of the Smart Work on the intention to use continuously with the staff members working in the small- and medium-sized enterprises as the subject. And, finally, it had intended to find out about the Smart Work environments of the IT corporations and the non-IT corporations. For this research, the questionnaire survey data were collected from the staff members working at the small- and medium-sized enterprises. Through the questionnaire survey data that were collected, an empirical analysis was carried out. And, through the reliability analysis, the feasibility analysis, the discriminatory feasibility analysis, and the inspection of the degree of suitableness of the structural equation model, finally, the research model was verified and, finally, a difference analysis of the IT corporations and the non-IT corporations was carried out. Regarding the results of the analysis of the research, it appeared that the factors of the job efficiency and the job autonomy of the special characteristics of the job had the positive influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the time flexibility of the job form could not have any influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the spatial flexibility had the influences on the job satisfaction only. The perceived usefulness, which was a parameter, had the positive influences on the job satisfaction and the intention to use continuously. And, finally, the job satisfaction had the positive influences on the intention to use continuously. And it appeared that there were the differences, too, between the IT corporations and the non-IT corporations. It is thought that, through the results of this research and through the Smart Work environment, the positive influences on the workers and the organizations could be induced and that a better working environment than previously can be provided to the workers to fit the special characteristics of the corporations.