• 한국통신학회논문지
• /
• 제24권6B호
• /
• pp.1203-1210
• /
• 1999

적응필터에서는 기준 입력신호와 상관없는 원신호의 목표신호 성분에 의해서 적응필터의 계수가 오조정된다. 본 논문에서는 목표신호가 있는 경우에 대해서 NSA(normalized sign algorithm)의 정상상태 성능과 수렴특성을 NLMS 알고리즘과 비교 분석했다. NLMS 알고리즘의 평균자승오차는 목표신호의 전력에 비례하지만, NSA는 목표신호 전력의 제곱근에 비례한다. 수렴특성은 목표신호가 큰 경우 NSA는 NLMS 알고리즘에 비해서 느리게 적응한다. 본 논문에서는 이론적으로 분석된 정상상태 성능과 수렴특성을 컴퓨터 시뮬레이션을 통해서 검증한다.

• 융복합기술연구소 논문집
• /
• 제9권1호
• /
• pp.7-12
• /
• 2019

The aim of this study is to improve the durability performance of catalysts for a catalytic combustor and to obtain operating conditions for stable combustion of the catalytic combustor. It was attempted to improve the durability of the catalysts by adding a promoter in order to reduce the cost of replacing Pt catalyst while maintaining stability. The main catalyst used in the study was Pt and the promoters were Ni and La. Pure Pt3/γ-Al₂O₃ catalyst without promoter was promoted to fast sintering states under harsh conditions and catalytic combustion was turned off, whereas the catalysts added La, Ni as promoter were showed relatively slow sintering states. It can be concluded that the promoter La, Ni effectively contributes to the improvement of the durability of the Pt catalyst, and it is possible to get longer durability and more stable duration than the conventional catalytic combustor.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.184-190
• /
• 2020

In the wet master batch process, process oil is used to improve the workability of silica-SBR. The process oil expands the polymer and provides lubrication to soften the stiff rubber chain. However, addition of excess process oil can interfere in the crosslinking reaction between rubber molecules and reduce the crosslinking density of silica-SBR. Controlling the amount of process oil is an important aspect for properly controlling the workability and crosslinking density of silica-SBR. In this study, silica-SBR was prepared by adjusting the amount of process oil to confirm its effect on silicaSBR. Vulcanization characteristics of silica-SBR were examined using a moving die rheometer. Dynamic viscoelasticity was measured using a dynamic mechanical thermal analyzer, and the mechanical properties were investigated using the universal testing machine according to ASTM D412. As a result, all silica-SBR compounds with 10 to 40 phr of process oil have effects of improving the processability and the silica dispersibility. Also, the optimum condition was determined when 10 phr of processed oil was added because the abrasion resistance was improved 65% compared to that at 40 phr.

• 대한융합한의학회지
• /
• 제3권1호
• /
• pp.15-27
• /
• 2022

Objectives: This study was conducted to review the overall concept of nutritional evaluation of infants and young children. Methods: Literature search was done to study definition, method and importance of nutritional evaluation of infants and young children. Pubmed and Google scholarship were used in the research. Search words were 'Nutritional evaluation', 'infants' and 'young children'. Results: Nutrition evaluation is mainly used by physical measurement, clinical evaluation, dietary intake survey, and biochemical test depending on the age and disease. The treatment method for 治未病, which is a concept of korean medicine, and 健兒法 for treating the concept of weak children are considered to have very high applicability in solving various problems found through nutrition evaluation in korean medical approach. Conclusion: Infants and children are the fastest growing period of their lives, showing rapid growth in physical, and emotional development along with rapid brain growth. Therefore, inadequate nutrition during this period affects mental and physical growth and development not only during that period but also throughout life. Nutrition evaluation is divided into regular evaluation that includes children in all growing seasons and screening evaluation for problem solving, and follow-up nutritional evaluation that evaluates nutritional status in the long run. For each nutritional evaluation, evaluation is conducted by physical measurement, clinical evaluation, dietary intake survey, and biochemical test. By comprehensively interpreting them, nutritional status is determined. This study provides basic data on the proper nutrition evaluation method to identify and correct nutritional problems such as growth level, nutritional deficiency, and nutritional excess early.

• 소성∙가공
• /
• 제9권3호
• /
• pp.293-303
• /
• 2000

Recent developments of Fe technology make it possible to apply CAD/CAE/CAM techniques successfully to the stamping die design among the automotive parts industries. Those successful applications are greatly attributable to the development of commercial S/W. Up to now most commercial S/W for the analysis of sheet metal forming is based on the dynamic explicit algorithm. The main characteristics of dynamic explicit algorithm is that there is no convergence problem if the time increment is taken less than the stability limit. The stability of the analysis is guaranteed in the commercial code, since the adequate time increment is computed from the so called "Courant Condition". However excess computing time is often pointed out in the dynamic explicit analysis according to the characteristics of process parameters taken. In the study, various parameters that may affect the stability and the method how to improve computational efficiency of analysis have been investigated.estigated.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.293-296
• /
• 2016

Using capacitance-voltage (C-V) and conductance-voltage (G/ω-V) measurements, the electrical properties of Cu/n-InP Schottky diodes were investigated. The values of C and G/ω were found to decrease with increasing frequency. The presence of interface states might cause excess capacitance, leading to frequency dispersion. The negative capacitance was observed under a forward bias voltage, which may be due to contact injection, interface states or minority-carrier injection. The barrier heights from C-V measurements were found to depend on the frequency. In particular, the barrier height at 200 kHz was found to be 0.65 eV, which was similar to the flat band barrier height of 0.66 eV.

• 한국정보컨버전스학회:학술대회논문집
• /
• 한국정보컨버전스학회 2008년도 International conference on information convergence
• /
• pp.157-160
• /
• 2008

The pursuit of efficiency is taken for granted in today's public administration, and the limit of this study exists in the point that we should carefully deal with combining the redundancy scheme to the public administration. Accordingly, although this study should suggest the specific plans and backgrounds of the needs for the redundancy, it will only find out the applicability of the redundancy to the public administration for its purpose. Redundancy means the excess or superfluity in something, which means the surplusage status ranging from the wasteful and excessive supplies, insignificant additions, to the surplusage in a legal pleading. The emphasis of this study is placed on the changes in the rigidity in believing that the removal of the redundancy from the public administration is the best option in any case of the efficiency. In addition, the necessity of the overlapped organization should not be neglected by the concept of the efficiency. Indeed, it is necessary to correct the overlapped function of superfluity and ambiguity public administration, in order to remove the neglect conflicts between the organizations, to guarantee the inconsistency in the public administration and to ensure the efficiency in the public administration volunteering.

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.1-7
• /
• 2004

In this paper the Individual tap - Least Mean Square(IT-LMS) algorithm is applied to the adaptive multipath channel equalization using hybrid-type Genetic Algorithm(GA) for achieving lower minimum Mean Squared Error(MSE). Owing to the global search performance of GA, LMS-type equalizers combined with it have shown preferable performance in both global and local search but those still have unsatisfying minimum MSE performance. In order to lower the minimum MSE we investigated excess MSE of IT-LMS algorithm and applied it to the hybrid GA equalizer. The high convergence rate and lower minimum MSE of the proposed system give us reason to expect that it will perform well in practical multi-path channel equalization systems.

• 융합경영연구
• /
• 제7권4호
• /
• pp.6-9
• /
• 2019

Purpose - This research mainly studied with the promotion of "one belt and one road "initiative's strategy and the construction of China, Japan and South Korea Free Trade Zone, China exports urgently needed industrial products to Japan and South Korea, which will not only help digest excess industrial capacity, optimize China's industrial structure, but also promote the economic development of Japan and South Korea. Research design, data, and Methodology - The study conducted a survey on 2018 year new revision of China-Korea Japan's data. Results -This study shows that In this process, multinational enterprises, as pioneers of economic development, play an irreplaceable role. However, due to the differences between laws of different countries and their own corporate culture concepts, enterprises in different countries will inevitably encounter various conflicts in the process of development. Conclusions -This requires our enterprises to have awareness of legal risk prevention in the process of development, and to study the corporate culture of relevant enterprises to truly achieve win-win cooperation.