• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.163-166
• /
• 2003

Since the track pin is subjected to large transverse track tension from the track link, conventional track pins for high mobility vehicles are usually made of high strength steel, which increases the weight of tracked vehicles due to the high density of steel. In this paper, several composite materials were employed for track pin design to reduce weight of track pin as well as to enhance the fatigue life of rubber bushings. Especially the effects of shear stiffness of the composites on the life of rubber bushing were investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1210-1216
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability, and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean high speed train. The software controls the hardware of the measurement system and acts as interface between users and the system hardware. In this paper, practical experiment are performed to verify mechanical performance of motor and main transformer for Korean high speed rail. The experimental test carried out by using new temperature measurement method and verify the temperature performance of motor and transformer is verified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.166-174
• /
• 2004

In urban area narrow commuter vehicles have attracted interest as a possible solution to reduce traffic congestion and parking problems. However, a narrow vehicle has an increased to overturn during hard cornering when compared to conventional vehicles. This tendency can be reduced by tilting it toward the inside of the turn. Two types of automatic tilting control systems which are Direct Tilt Control(DTC) and Steering Tilt Control(STC) have been developed. In this paper as one of the technique to improve the handling performance for the unusual vehicle the control system which blends both the DTC and the STC system is considered. It uses the merits of both the DTC and the STC system. As a control strategy for combination the switching control method is used. Finally, the fact that the unusual vehicle is safe under an emergency situation such as slippery road surface is proved by computer simulation.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.50-55
• /
• 2013

When it comes to commercial vehicles, their unique characteristics - center of gravity, size, weight distribution - make them particularly vulnerable to rollover. On top of that, conventional heavy vehicle brake exhibits longer actuation delays caused in part by long air lines from brake pedal to tires. This paper describes rollover prevention algorithm that copes with the characteristics of commercial vehicles. In regard of compensating for high actuating delay, predicted rollover index with short preview time has been designed. Moreover, predicted rollover index with longer preview time has been calculated by using road curvature information based on environment information. When rollover index becomes larger than specific threshold value, desired braking force is calculated in order to decrease the index. At the same time, braking force is distributed to each tire to make yaw rate track desired value.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.57-70
• /
• 2011

To address global climate change, various governments are investing in electric vehicle research and, especially in Korea, the application of electric vehicles to public transportation. The lithium batteries used in electric vehicles typically have an expected life cycle of 2-5 years. If electric vehicles become commonly used, they will generate many discarded batteries that could be harmful to the environment. Additionally, lithium batteries are potentially explosive and should be handled appropriately. Thus, reverse logistics issues are involved in handling expired batteries efficiently and safely. Reverse logistics includes the collection, recycling, remanufacturing, and discarding of waste. This study developed a reverse logistics process for electric vehicle batteries after analyzing the as-is process for lead and lithium batteries. It also developed possible disposal regulations for electric vehicle batteries based on current laws regarding conventional batteries.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.26-31
• /
• 2021

Although the number of domestic electric vehicle registrations exceeded 100,000 in the first half of 2020, legal and institutional concerns for maintenance and management are insufficient. In particular, the existing automobile maintenance business and qualification holders are not prohibited from performing electric vehicle maintenance without additional qualifications or training under the current laws. In this study, we review the current status of Korean laws and regulations, examine discussions abroad such as the UK, the US, and Germany, and then discuss desirable laws and institutional reform. This study proposes to temporarily reorganize the system in a way that separates the electric vehicle maintenance business and the electric vehicle maintenance qualifications from conventional vehicle.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.496-502
• /
• 2020

The reliability of a solid-state transformer (SST) is one of the important aspects to consider when replacing a conventional low-frequency passive transformer with SST for urban railway vehicles. Lifetime evaluation of SST in the design phase is therefore essential in guaranteeing a certain SST reliability. In this study, a lifetime evaluation of power semiconductor devices in SST is performed with respect to temperature stress. For a case study, a 3 MW SST with three kinds of power modules (one IGBT module and two SiC-MOSFET modules) is used for the lifetime estimation under the operation profile of urban railway vehicles.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.109-113
• /
• 2003

Recently, freight cars for diverse purposes were developed to increase the speed of freight car in conventional line. The welded type bogies are applied to these vehicles like container car, gondola car, hopper car, etc. This study was focused on the dynamic characteristics and the stability of freight car to guarantee the running safety. We have conducted the running tests of freight cars in conventional line and described the test results in this paper.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.143-150
• /
• 2000

Like conventional railways, improving running performance of vehicle in curve is more effective than improving maximum speed to reduce traveling time. But some vehicles have problems concerning running performance in cure because of insufficient study for our conventional railway characteristics. So, these problems brought about increasement of maintenance cost. This study was started to deliberate several plans to solve problems concerning running performance in curve. Some modifications of primary suspension and tests were carried out to improve curve negotiation. Here, we describe some results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.833-838
• /
• 2003

This paper presents novel methods of recognizing license plates of passing vehicles outdo(n. In particular, the proposed method is much robust for inclined plates caused by the changes of camera placement. To acquire fine images of quickly passing vehicles under a wide range of illumination conditions, we developed a sensing system having superb characteristics. We expanded the dynamic range and eliminated the blurring of images of fast moving vehicles by synthesizing a pair of synchronized images with different intensities. furthermore, to extend the flexibility of the positioning of the TV camera, we propose a recognition algorithm that can be applied to inclined plates. The performance of the integrated system was investigated on real images of vehicles captured under various illumination conditions. The recognition rates of over 99% (conventional plates) and over 97% (highly inclined plates) shows that the developed system is effective for license plate recognition.