• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.375-384
• /
• 2001

Optical remote sensing techniques are particularly advantageous over the conventional fixed point methods because with these methods large-area monitoring can be possible and sample preparation difficulties are avoidable. Instruments based on the differential optical absorption spectroscopy (DOAS) technique are widely used for monitoring air pollutants in urban areas in recent years. In this study, $O_3$, SO$_2$, NO$_2$, and VOCs (benzene, toluene, xylene, and styrene) are measured continuously at Sihwa industrial area using a DOAS from February to November. 1999. Intercomparison between the DOAS method and the conventional methods (filed point samplers for $O_3$, NO$_2$, and SO$_2$, and adsorbent sampling methods and gas chromatography for VOCs) are performed simultaneously at the same site. The time series of the DOAS data and that of fixed point method show good match at the view point of the tendency, but the absolute concentration values of these two methods differ quite a lot from each other; correlation coefficients shows 0.78 for $O_3$and 0.97 for SO$_2$. However, the results of VOCs measurements are not quite satisfactory ; the spectral interference with $O_2$and $O_3$appears to be the major cause of the errors for VOCs .

• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.395-405
• /
• 2001

To make an assessment of the compatibility between DOAS and conventional point monitoring system (MCSAM-2: MS2), we investigated the concentrations of three criteria pollutants which include S $O_2$, N $O_2$, and $O_3$from a national monitoring station in Seoul during the periods of June 1999~August 2000. The average concentration values for the whole study period derived from hourly concentration data sets of those three species indicated that the mean differences between the two methods can be approximated as 18%. When the bias structure of two systems was evaluated through the computation of percent difference(PD) between the two such as ( $C_{DOAS}$- $C_{conventional}$ $C_{DOAS}$*100, differences between the two systems appeared to be quite systematic among different compounds. While the mode of bias peaked at 0~20% or 20~40% in terms of PD values, the cause of such positive bias mainly arised from generally enhanced concentration values of DOAS system. The structure of bias among different species was further assessed through linear regression analysis. Results of the analysis indicated that the dominant portions of differences observed from two monitoring systems can be accounted for by the systematic differences in their spanning and zeroing systems. S $O_2$(MS2)=0.6385 S $O_2$(DOAS)+2.0985($r^2$=0.7894) N $O_2$(MS2)=0.6548 N $O_2$(DOAS)+7.437($r^2$=0.7687) $O_3$(MS2)=1.0359 $O_3$(DOAS)-7.7885($r^2$=0.7944) The findings of slope values at around 0.64~0.65 from two species suggest that DOAS should respond more sensitively in upper bound concentration range. The offset values apart from zero indicate that more deliberate comparison needs to be made between these monitoring systems. However, based on the existence of strong correlations from at least 8,000 data points for each species of comparison, we were able to conclude that the compatibility of two monitoring systems is highly significant. With the improvement of calibration techniques for the DOAS system. its applicability for routine monitoring of airborne pollutant species is expected to be quite extendable.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.632-639
• /
• 2001

This paper proposes an improved architecture of web-based monitoring systems for monitor of processes in plants from the soft real-time point of view. The suggested model is designed to be able to guarantee the temporal and spatial consistency and transmit the monitoring data periodically via the intranet and the Internet. The model generates one thread for monitoring management, one DB thread, one common memory, and corresponding monitoring threads to clients. The monitoring thread is executed during the smaller time than the execution time of the process used in the conventional methods such as CGI and servlet method. The Java API for the server API, VRML, EAI(External Authoring Interface) and Java Applets for efficient dimensional WEB monitoring are used. The proposed model is implemented and tested for a FMS plant, Some examples show that the proposed model is useful one.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.169-181
• /
• 2001

To test the compatibility of differential optical absorption spectroscopy (DOAS) and conventional in-situ monitoring technique we conducted a comparative analysis of the two systems using hourly measurement data sets of three criteria pollutants including No$_{2}$O$_{3}$, and SO$_{2}$ collected in months between April and June of 2001 at Sung Man city, Kyung Gi Province, Korea. The results of our comparative analysis were useful to evaluate the various aspects of DOAS performance, of particular the level of agreement with the counterpart method through computation of percent differences and correlation analysis. Interpretation of the mixing ratio data for those chemical species was however confined in terms of explaining the differences affected by the changes in environmental conditions because measurements of important meteorological parameters were limited during most of the study period. Nevertheless, the overall results of this study strongly demonstrated that the mixing ratio of major pollutants measured by the two different systems maintain strong compatibility from various respects.

• Journal of Ecology and Environment
• /
• 제41권5호
• /
• pp.145-151
• /
• 2017

Background: Conventional bird observation methods are line survey or point count method by bare eyes or through binoculars or telescopes. But in this study, the possibility of monitoring waterbirds using drones beyond the conventional research methods was explored. It also describes the direction of producing and accumulating images of waterbird habitats as a method to efficiently determine changes in waterbird habitats. Results: From the study, it was concluded that waterbird monitoring using drones was a new monitoring technique which could be applied to the field and 26 kinds of waterbirds were observed. In the case of a drone with a single lens, it was difficult to identify objects because the size of the subject was too small at a certain altitude. In this case, zoom lens can be an alternative. It has also been verified that image analysis software can be used to accumulate images of waterbird habitats. Conclusions: If various kinds of advanced drones and cameras are used, it would be possible to monitor larger areas including the areas that are difficult for human access and to observe more waterbirds and wider habitats.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.476-480
• /
• 2004

The characteristics of antimony implants are relatively well-known. Antimony has lower diffusion coefficient, shorter implantation range, and smaller scattering as compared with conventional dopants such as phosphorous and arsenic. It has been commonly used in the doping of buried layer in Bi-CMOS process. In this paper, characteristics and appropriate condition of monitoring in antimony implant beam tuning using Sb$_2$O$_3$were investigated to get a reliable process. TW(Thema Wave) and R$_{s}$(Sheet Resistance) test were carried out to set up condition of monitoring for stable operation through the periodic inspection of instruction condition. The monitoring was progressed at the point that the slant of R$_{s}$ varied significantly to Investigate the variation of instruction accurately.

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.19-28
• /
• 2016

This study was to design the optimal locations of the water level monitoring to quantify the agricultural water use in irrigation area supplied from an agricultural reservoir. In most of agricultural areas without TM/TC (Tele-Monitoring and Tele-Control) or monitoring network, irrigation water have been supplied on conventional experience and agricultural reservoir have been operated based on the operating simulation results by HOMWRS (Hydrological Operation Model for Water Resources System). Therefore, this study quantified the amount of agricultural water use in an irrigation area (Musu Reservoir, Jincheon-gun) by establishing water level monitoring network and analyzed the agricultural water saving effect. According to the evaluation of the economic values for water saving effect, the saving agricultural water of 1.7 million ton was analyzed to have economic values of 0.85 million won as water for living, and 1.78 million won as water for industrial use. It is identified to secure economic feasibility of the new water monitoring network by establishing one monitoring point in the entrance, irrigation area and endpoint through the economic analysis.

• 한국측량학회지
• /
• 제16권1호
• /
• pp.27-40
• /
• 1998

본 논문은 구조물의 변형과 거동의 모니터링에 GPS 측위기술의 적용가능성을 제시한다. 첫번째 부분은 GPS관측의 반복재현성(repeatability)에 대한 정량적 연구로서 기준망내 기준점들간의 기선벡터를 반복적으로 측정함에 있어서 동일한 결과가 얻어질 수 있는가를 구명하고자 하였으며, 두번째 부분은 한 점당 몇 분이내의 관측시간이 소요되는 kinematic GPS측량의 변형 모니터링 수행성을 평가하고자 하였다. 흙댐을 대상으로 계절 및 수위정도에 따라 총 4차에 걸쳐 모니터링 시험망에 대한 관측을 수행하였다. 기준망은 static 방식으로 관측하였고, 모니터링 점들에 대해서는 kinematic방식은 물론 static 및 rapid-static방식으로 각각 관측을 행하여 종래의 측량기법으로 얻어진 결과와 비교하였다. 기준점들간의 기선벡터 관측에서 평균 7 mm 이내의 3차원 기선벡터의 반복재현성을 성취할 수 있었으며, 기준망들의 폐합오차는 4∼27 ppm를 나타내었다. kinematic 접근법은 종래의 측량기법에 비하여 기준점들과 모니터링 점들간의 경사거리에서 34 m의 차를 나타내었고, 높이에서는 4∼8 mm의 차를 나타내었다. kinematic GPS 측량기법은 5 m정도의 측정능력을 지닌 종래의 측량기법에 의한 변형 모니터링의 효율적인 대안이 될 수 있음을 확인할 수 있었다.

• 한국환경생태학회지
• /
• 제11권2호
• /
• pp.210-213
• /
• 1997

본 연구는 하천환경의 생태적 재생을 목적으로 자연형 저수로 호안공법을 개발하기 위해 수행되었다. 이를 위해 실험하펀으로 선정한 양재천 학여울 구간에 사주부, 수충부, 얕은 만 3가지 유형의 하안경관 특성에 따라 촌 10가지 공법을 개발, 시험 족용하였다. 각 호안공법의 설계에서는 정수식물의 식재에 중점을 두었으며 설계된 공법들은 현장 적용되었고, 적용후 1년간의 경관 형성과정과 식생복원 모니터링을 실시ㅏ였다. 일ㄹ 통해 자연형 저수로 호안공법의 기술적 실행 가능성을 높여, 관행적으로 행해지고 있는 하천공법을 대체할 수 있는 생태적 대안을 제시하였다.