• Imaging Science in Dentistry
• /
• 제52권1호
• /
• pp.1-9
• /
• 2022

Purpose: This systematic review aimed to compare assessments of the healing of periapical endodontic surgery using conventional radiography and cone-beam computed tomography (CBCT). Materials and Methods: This review of clinical studies was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. All articles published from 1990 to March 2020 pertaining to clinical and radiographic healing assessments after endodontic surgery using conventional radiography and CBCT were included. The question was "healing assessment of endodontic surgery using cone-beam computed tomography." The review was conducted by manual searching, as well as undertaking a review of electronic literature databases, including PubMed and Scopus. The studies included compared radiographic and CBCT assessments of periapical healing after periapical endodontic surgery. Results: The initial search retrieved 372 articles. The titles and abstracts of these articles were read, leading to the selection of 73 articles for full-text analysis. After the eligibility criteria were applied, 11 articles were selected for data extraction and qualitative analysis. The majority of studies found that CBCT enabled better assessments of healing than conventional radiography, suggesting higher efficacy of CBCT for correct diagnosis and treatment planning. A risk of bias assessment was done for 10 studies, which fell into the low to moderate risk categories. Conclusion: Three-dimensional radiography provides an overall better assessment of healing, which is imperative for correct diagnosis and treatment planning.

• Journal of Biosystems Engineering
• /
• 제6권1호
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• 대한치과의사협회지
• /
• 제53권8호
• /
• pp.558-568
• /
• 2015

Objective: The objectives of this study were to measure pediatric organ and effective doses of cone-beam computed tomography (CBCT) for orthodontic analysis and to compare them to those of panoramic and lateral cephalometric radiography, the conventional radiography for orthodontic analysis. Materials and Methods: Alphard VEGA for CBCT, Planmeca Proline XC for panoramic radiography and Orthophos CD for cephalometric radiography were used for this study. Thermoluminescent dosimeter (TLD) chips were located at 24 anatomic sites of 10-year-old anthropomorphic phantom and exposed during CBCT (C-mode; $200{\times}179mm$ FOV), panoramic and lateral cephalometric radiographic procedures at the clinical exposure settings for 10-year-old patient. Pediatric organ and effective doses were measured and calculated using ICRP 2007 tissue weighting factors. Results: Effective doses of CBCT, panoramic radiography and lateral cephlometric radiography in pediatric clinical exposure settings were $292.5{\mu}Sv$, $19.3{\mu}Sv$, and $4.4{\mu}Sv$ respectively. The thyroid gland contributed most significantly to the effective dose in all the radiographic procedures. Conclusion: Effective dose of CBCT was about 12 times to conventional radiographic procedures for orthodontic analysis in pediatric patient. The use of CBCT for orthodontic analysis should be fully justified over conventional radiography and dose optimization to decrease thyroid dose is needed in pediatric patients.

• Journal of Korean Neurosurgical Society
• /
• 제51권4호
• /
• pp.222-226
• /
• 2012

The waffle-cone technique is a modified stent application technique, which involves protrusion of the distal portion of a stent into an aneurysm fundus to provide neck support for subsequent coiling. The authors report two cases of wide necked basilar bifurcation aneurysms, which were not amenable to stent assisted coiling, that were treated using the waffle-cone technique with a Solitaire AB stent. A 58-year-old woman presented with severe headache. Brain CT showed subarachnoid hemorrhage and angiography demonstrated a ruptured giant basilar bifurcation aneurysm with broad neck, which was treated with a Solitaire AB stent and coils using the waffle-cone technique. The second case involved an 81-year-old man, who presented with dizziness caused by brain stem infarction. Angiography also demonstrated a large basilar bifurcation unruptured aneurysm with broad neck. Solitaire AB stent deployment using the waffle-cone technique, followed by coiling resulted in near complete obliteration of aneurysm. The waffle-cone technique with a Solitaire AB stent can be a useful alternative to conventional stent application when it is difficult to catheterize bilateral posterior cerebral arteries in patients with a wide-necked basilar bifurcation aneurysm.

• Restorative Dentistry and Endodontics
• /
• 제9권1호
• /
• pp.127-132
• /
• 1983

The purpose of this study was to examine the sealing ability of the vitapex, when used with gutta-percha cone, as a root canal filling material. Fourty five canals from extracted human maxillary and mandibular teeth were randomly selected and instrumented in a conventional method with k-file. After instrumentation and dry the canal with paper points, the canals were divided into three groups and fifteen canals in each group were filled with the following materials; Vitapex, Vitapex in combination with gutta-percha cone, and Gutta-percha cone and Zinc-oxide Eugenol Cement. All the specimens were immersed in 2% methylenblue dye solution and the depth of dye penetration into the canals were evaluated by macroscope at the intervals of 1 day, 2days and 7days. The following results were obtained; 1. All the materials experimented showed varying degrees of dye penetration. 2. The canals filled with Vitapex and Vitapex in combination with gutta perch a cone revealed sudden increase of dye penetration with time passage compared to the canals obturated with Gutta-percha cone and Zinc-oxide eugenol cement. 3. In the canals filled with Vitapex, the mean dye penetration was 1.6mm at 1day, but the specimen exposed to the dye for 7days showed mean dye penetration of 9.2mm. 4. In the canals obturated with Vitapex and gutta-percha cone, the mean dye penetration was 2mm at 1day, 2.2mm at 2days, and 8mm at 7days.

• Imaging Science in Dentistry
• /
• 제36권3호
• /
• pp.123-129
• /
• 2006

The use of computed tomography for dental procedures has increased recently. Cone beam computed tomography (CBCT) systems have been designed for imaging hard tissues of the dentomaxillofacial region. CBCT is capable of providing high resolution in images of high diagnostic quality. This technology allows for 3-dimensional representation of the dentomaxillofacial skeleton with minimal distortion, but at lower equipment cost, simpler image acquisition and lower patient dose. Because this technology produces images with isotropic sub-millimeter spatial resolution, it is ideally suited for dedicated dentomaxillofacial imaging. In this paper, we provide a brief overview of cone beam scanning technology and compare it with the fan beam scanning used in conventional CT and the basic principles of currently available CBCT systems.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.58-64
• /
• 2003

Dimethyl Ether(DME) has been considered as one of the most attractive alternative fuels for compression ignition engine. Its main advantage in diesel engine application is high efficiency of diesel cycle with soot free combustion though conventional fuel injection system has to be modified due to the physical properties of DME. Experimental study of DME and conventional diesel spray employing a common-rail type fuel injection system with a 5-hole sac type injector was performed in a constant volume vessel pressurized by nitrogen gas. Spray cone angles and penetrations of the DME spray were characterized and compared with those of diesel. For evaluation of the evaporating characteristics of the DME, shadowgraphy technique employing an Ar-ion laser and an ICCD camera was adopted. Tip of the DME spray was formed in mushroom-like shape at atmospheric chamber pressure, which disappeared in higher chamber pressure. Spray tip penetration and spray cone angle of the DME became similar to those of diesel under 3MPa of chamber pressure. Higher injection pressure provided wider vapor phase area while it decreased with higher chamber pressure condition.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.29.1-29.7
• /
• 2019

Endodontic microsurgery is defined as the treatment performed on the root apices of an infected tooth, which was unresolved with conventional root canal therapy. Recently, the advanced technology in 3-dimensional model reconstruction based on computed tomography such as cone beam computed tomography has opened a new avenue in application of personalized, accurate diagnosis and has been increasingly used in the field of dentistry. Nevertheless, direct intra-oral localization of root apex based on the 3-dimensional information is extremely difficult and significant amount of bone removal is inevitable when freehand surgical procedure was employed. Moreover, gingival flap and alveolar bone fenestration are usually required, which leads to prolonged time of surgery, thereby increasing the chance of trauma as well as the risk of infection. The purpose of this case report is to present endodontic microsurgery using the guide template that can accurately target the position of apex for the treatment of an anterior tooth with calcified canal which was untreatable with conventional root canal therapy and unable to track the position of the apex due to the absence of fistula.

• 대한소아치과학회지
• /
• 제51권3호
• /
• pp.265-278
• /
• 2024

This study investigates the potential of cone-beam computed tomography (CBCT)-generated cephalograms as a replacement for conventional lateral cephalograms (LCs) in children and adolescents. This retrospective study included 60 individuals, equally divided into permanent and mixed dentition groups. Both groups underwent conventional LCs and CBCT scans on the same day. LCs were then derived from CBCT scans. The same examiner performed digital measurements twice, with a week's interval, identifying landmarks and obtaining 7 angular and 5 linear measurements. In the permanent dentition group, significant differences were observed between the two imaging modalities for 6 angular and 2 linear measurements. In the mixed dentition group, significant differences were observed for 3 angular and 2 linear measurements. However, none of these differences exceeded the clinically acceptable limit of 2.0° or 2.0 mm. No significant differences in any measurement were found between the two groups (p < 0.05). CBCT-generated LCs demonstrated comparable results with good reliability in both dentition groups, suggesting their potential as suitable alternatives for children and adolescents who require CBCT for clinical purposes.

• 대한소아치과학회지
• /
• 제39권3호
• /
• pp.273-279
• /
• 2012

목적: 상악 정중과잉치의 영상진단 시 시행되는 콘빔 전산화단층촬영술에 대한 환자의 방사선 피폭을 유효선량으로 평가하고, 치근단 및 파노라마방사선촬영술의 방사선피폭과 비교하고자 하였다. 재료 및 방법: 선량 측정용 두경부 마네킨의 23부위에 열형광선량계 소자를 위치시키고 해당 방사선촬영술을 시행하였다. 열형광선량계 판독기로 흡수선량를 측정하고 방사선 조사된 조직의 비율을 곱하여 방사선 가중선량을 구한 후, 국제방사선방호위원회에서 2007년에 공지한 조직 가중계수를 이용하여 유효선량을 구하였다. 결과: 조직 및 기관의 흡수선량은 콘빔 전산화단층촬영술, 치근단방사선촬영술 그리고 파노라마방사선촬영술에서 뺨, 하악체, 이하선에서 가장 높았다. 유효선량은 콘빔 전산화단층촬영에서는 48 ${\mu}Sv$, 치근단방사선촬영술에서는 2 ${\mu}Sv$ 그리고 파노라마방사선촬영술에서는 18 ${\mu}Sv$였다. 결론: 상악 정중과잉치 진단 시, 추가적인 진단학적 정보를 제공하지만, 콘빔 전산화단층촬영술은 일반 치근단 및 파노라마 방사선촬영술보다 방사선피폭이 크다.