• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.649-656
• /
• 2007

Today, controller area network(CAN) is a field bus that is nowadays widespread in distributed embedded systems due to its electrical robustness, low price, and deterministic access delay. However, its use safety-critical applications has been controversial due to dependability limitation, such as those arising from its bus topology. Thus it is important to analyze the performance of the network in terms of load of data bus, maximum time delay, communication contention, and others during the design phase of the controller area network. In this paper, a simulation algorithm is introduced to evaluate the communication performance of the vehicle network and apply software base fault injection techniques. This can not only reduce any erratic implementation of the vehicle network but it also improves the reliability of the system.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.77-79
• /
• 2004

Because robot hardware architecture generally is consisted of a few sensors and motors connected to the central processing unit, this type of structure is led to time consuming and unreliable system. For analysis, one of the fundamental difficulties in real-time system is how to be bounded the time behavior of the system. When a distributed control network controls the robot, with a central computing hub that sets the goals for the robot, processes the sensor information and provides coordination targets for the joints. If the distributed system supposed to be connected to a control network, the joints have their own control processors that act in groups to maintain global stability, while also operating individually to provide local motor control. We try to analyze the architecture of network-based humanoid robot's leg part and deal with its application using the CAN(Controller Area Network) protocol.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.29-32
• /
• 2001

This paper describes a development of the integrated controller system for car electrical signal control with CAN communication protocol. The CAN protocol is a robust serial bus system for the control of distributed module in the multiplexed network. After a brief of the main features of the CAN will be addressed, this paper presents the result of the development of the integrated hardware system overall control program.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.235-236
• /
• 2010

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.162-165
• /
• 2017

CAN (controller area network) is a standard real-time serial communication protocol, and it was developed to control various in-vehicle electronic modules. In this paper, a CAN controller was designed in Verilog HDL, based on CAN ver. 2.0A and 2.0B. The designed CAN controller was implemented in FPGA, and it was verified its operation by connecting commercial chips. Its size is about 7,800 gates when synthesized in 0.18um technology.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2242-2244
• /
• 2003

This paper considers a networked control system (NCS) that consists of an inverted cart pendulum, a digital controller, and a controller area network (CAN) in which the actuator and sensors of the pendulum are connected to form a closed-loop system. The worst-case message response time (WCMRT) in the CAN is analyzed and the analysis results are applied to the target control system. For the case where the control system cannot satisfy the WCMRT condition and therefore time delays are inevitable, the Luck and Ray method is used to compensate the network-induced time delays. Simulations are carried out to show the feasibility of the proposed scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.90-93
• /
• 2009

Recently, CAN(Controller Area Network) being used in vehicle network system is suitable Network Protocol for smart vehicles with a future that need many ECUs, and it guarantees stability and reliability. It is revealed that being equipped many ECU could reduce the increasing of energy consumption and energy cost from the increasing of Wiring Harness's space and weight. In this paper, future smart vehicle control Air conditioner and heater for convenient and comfortable driving as using CAN protocol and implement auto control system According to driver's requirement using temperature in the vehicle.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.268-276
• /
• 2003

In this paper, we present a new control and monitoring technique for a power system using CAN(Controller Area Network). Feedback control systems having co'ntrol loops closed through a network(i.e. Ethernet, ControlNet, CAN) are called NCSs(Networked Control Systems). The major problem of NCSs is the variation of stability property according to time delay including network-induced delay and computation delay in nodes. We present a new stability analysis method of NCSs with time delay exploiting a state-space model of LTI(Linear Time Invariant) interconnected systems. The proposed method can determine a proper sampling period of NCSs that preserves stability performance even in NCSs with a dynamic controller. We design CAN nodes which can transmit control and monitoring data through CAN bus and apply these to NCSs for a power system. The results of the experiment validate effectiveness of our control and monitoring technique for a power system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.47-57
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units (ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electricthrottle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.351-358
• /
• 2017

The most common communication interface for automotive electronic control devices is CAN (Controller Area Network). Sine CAN was first adopted to Daimler vehicles in 1991, all of automobile manufacturers use the CAN communication for in-vehicle networks. However, as the number of electronic control devices connected to the CAN network rapidly increases, the CAN protocol reaches the limit of technology. To overcome this limitation, Bosch introduced the new communication protocol, that is CAN-FD (Flexible Data-rate). In this paper, we analyze the characteristics and limitations of CAN-FD communication according to the topology under the in-vehicle wiring harness environment designed based on the existing classic CAN communication.