• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.168-173
• /
• 2006

The side effects of head and neck radiation therapy include mucositis, xerostomia, loss of taste, radiation caries, oral infection, osteoradionecrosis and trismus. When a patient is arranged to begin head & neck radiotherapy, oral pathologic lesions are examined and managed for the prevention of oral complications. The advanced odontogenic infection should be especially controlled before the radiotherapy and the patient must be instructed for proper oral prophylaxis. Generally the more conservative treatments, such as, scaling, restoration, endodontic treatment, are the care of choice and dental extraction is performed in advanced periapical and periodontal pathologic conditions. If the dental extraction should be done, the radiotherapy consequently will be delayed until there is epithelium covering the extraction socket, leaving no exposed bone. The cancer patient with severe emotional stress pray for the early radiation therapy, in spite of possibility of the recurrent odontogenic infectious lesions. So, the authors attempted to do the early radiation therapy by the conservative endodontic drainage and surgical incision & drainage without extraction of the infected teeth, and resulted in relatively good prognosis without the severe side effects of head and neck radiotherapy.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.153.2-153.2
• /
• 2011

The IGRINS (Immersion GRating INfrared Spectrometer) is a high resolution wide-band infrared spectrograph developed by Korea Astronomy and Space Science Institute (KASI) and the University of Texas at Austin (UT). Immersion grating is a key component of IGRINS, which disperses the input ray by using a Silicon material with a lithography technology. Opto-mechanical mount for the immersion grating is important to keep the high spectral resolution and the optical alignment in a cold temperature of $130{\pm}0.06K$. The optical performance of immersion grating can maintain within the de-center tolerance of ${\pm}0.05mm$ and the tip-tilt tolerance of ${\pm}1.5arcmin$. The mount mechanism utilizes the flexure and the kinematic support design to satisfy the requirement and the operation condition. When the IGRINS system is cooled down to a cold temperature, three flexures compensate the thermal contraction stress due to the different material between the immersion grating and the mounting part(Aluminum 6061). They also support the immersion grating by an appropriate preload. Thermal stability is controlled by a copper strap with proper dimensions and a heater. Generally structural and thermal analysis was performed to confirm the mount mechanism. This talk presents the opto-mechanical mount design of the immersion grating of IGRINS.

• Smart Structures and Systems
• /
• v.18 no.1
• /
• pp.139-154
• /
• 2016

This paper is concerned with the dynamics of hyperelastic solids and structures. We seek for a smart control actuation that produces a desired (prescribed) displacement field in the presence of transient imposed forces. In the literature, this problem is denoted as displacement tracking, or also as shape morphing problem. One talks about shape control, when the displacements to be tracked do vanish. In the present paper, it is assumed that the control actuation is provided by imposed eigenstrains, e.g., by the electric field in piezoelectric actuators, or by thermal actuators, or via analogous physical effects, such as magneto-striction or pre-stress. Structures with a controlled eigenstrain-type actuation belong to the class of smart structures. The action of the eigenstrains can be conveniently characterized by actuation stresses. Our theoretical derivations are performed in the framework of the theory of small incremental dynamic deformations superimposed upon a statically pre-deformed configuration of a hyperelastic solid or structure. We particularly ask for a distribution of incremental actuation stresses, such that the incremental displacements follow exactly a prescribed trajectory field, despite the imposed incremental forces are present. An exact solution of this problem is presented under the assumption that the actuation stresses can be tailored freely and applied everywhere within the body. Extending a Neumann-type solution strategy, it is shown that the actuation stresses due to the distributed control eigenstrains must satisfy certain quasi-static equilibrium conditions, where auxiliary body-forces and auxiliary surface tractions are to be taken into account. The latter auxiliary loading can be directly computed from the imposed forces and from the desired displacement field to be tracked. Hence, despite the problem is a dynamic one, a straightforward computation of proper actuator distributions can be obtained in the framework of quasi-static equilibrium conditions. Necessary conditions for the functioning of this concept are presented. Particularly, it must be required that the intermediate configuration is infinitesimally superstable. Previous results of our group for the case of shape control and displacement tracking in linear elastic structures are included as special cases. The high potential of the solution is demonstrated via Finite Element computations for an irregularly shaped four-corner plate in a state of plain strain.

• Korean Journal of Poultry Science
• /
• v.34 no.4
• /
• pp.301-318
• /
• 2007

Marek's disease (MD) is a highly contagious lymphoproliferative disease of poultry caused by the oncogenic herpesvirus designated Marek's disease virus (MDV). MD has a worldwide distribution and is thought to cause an annual loss over US$ one billion to the poultry industry. Originally described as a paralytic disease, today MD is mostly manifested as an acute disease with tumors in multiple visceral organs. MD is controlled essentially by the widespread use of live vaccines administered either in ovo into 18-day-old embryos or into chicks immediately after they hatch. In spite of the success of the vaccines in reducing the losses from the disease in the last 30 years, MDV strains have shown continuous evolution in virulence acquiring the ability to overcome the immune responses induced by the vaccines. During this period, different generations of MD vaccines have been introduced to protect birds from the increasingly virulent MDV strains. However, the virus will be countered each new vaccine strategy with ever more virulent strains. In spite of this concern, currently field problem from MD is likely to be controled by strategy of using bivalent vaccine. But, potential risk factors for outbreak of MD are still remained in this condition. The major factors can be thought that improper handling and incorrect administration of the vaccine, infection prior to establishment of immunity, suppression of immune system by environmental stress and outbreaks of more virulent MDV strain by using vaccine and genetic resistance of host.

• Journal of Korean Medicine for Obesity Research
• /
• v.19 no.2
• /
• pp.119-136
• /
• 2019

Objectives: People often fail to maintain their weight even though they have succeeded in weight loss. The purpose of this study was to review previously published study results with regards to the predictive factors associated with weight loss maintenance after successful weight loss. Methods: The authors searched for the articles related to weight loss maintenance after successful weight loss, published up until June 2019 on PubMed, Cochrane Central Register of Controlled Trials (CENTRAL), Embase, Research Information Sharing Service (RISS), and Koreanstudies Information Service System (KISS). A total of 76 articles were finally selected. From the study results, changeable and unchangeable predictors were extracted, and these predictors were examined according to detailed categories. Results: The changeable predictors of weight loss maintenance included behavioral factors, psychological factors and treatment process-related factors, whereas the unchangeable predictors included genetic and physiological factors, demographic factors, history of treatment on obesity-related factors. The main factors of weight loss maintenance were changeable predictors such as healthy eating habits, dietary intake control, binge eating control, regular exercise and physical activity, depression and stress control, social supports, self-regulation, self-weighing and initial weight loss and unchangeable predictors such as low initial weight and maximum lifetime weight. Conclusions: The results of our review results suggest that changeable and unchangeable predictors of weight loss maintenance should be carefully examined during treatments of obesity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.495-502
• /
• 2014

Fast recovery diodes (FRDs) were developed using the $p^{{+}{+}}/n^-/n^{{+}{+}}$ epitaxial layers grown by low temperature epitaxy technology. We investigated the effect of electrostatic discharge (ESD) stresses on their electrical and switching properties using current-voltage (I-V) and reverse recovery time analyses. The FRDs presented a high breakdown voltage, >450 V, and a low reverse leakage current, < $10^{-9}$ A. From the temperature dependence of thermal activation energy, the reverse leakage current was dominated by thermal generation-recombination and diffusion, respectively, at low and high temperature regions. By virtue of the abrupt junction and the Pt drive-in for the controlling of carrier lifetime, the soft reverse recovery behavior could be obtained along with a well-controlled reverse recovery time of 21.12 ns. The FRDs exhibited excellent ESD robustness with negligible degradations in the I-V and the reverse recovery characteristics up to ${\pm}5.5$ kV of HBM and ${\pm}3.5$ kV of IEC61000-4-2 shocks. Likewise, transmission line pulse (TLP) analysis reveals that the FRDs can handle the maximum peak pulse current, $I_{pp,max}$, up to 30 A in the forward mode and down to - 24 A in the reverse mode. The robust ESD property can improve the long term reliability of various power applications such as automobile and switching mode power supply.

• The Korean Journal of Ecology
• /
• v.12 no.4
• /
• pp.219-236
• /
• 1989

The effect of salinity on the seed germination and seedling growth of Pinus densiflora for. erecta Uyeki were studied under the controlled conditions in the growth chamber. The seeds were sorted into three classes in weight such as large ($15.49\pm$1.63mg), medium($10.61\pm$1.38mg), and small ($6.57\pm$1.33mg) to determine the role of seed weight in germination and seedling growth of the pine. Polymorphic seeds of the pine were germinated an salinity range of 0 to 1.5% NaCl under various temperature ($10^{\circ}$ $-25^{\circ}$ with $5^{\circ}$C interval of constant temperature, and $10^{\circ}$ $-20^{\circ}$C, $15^{\circ}$ $-25^{\circ}$C of alternating temperature) in order to determine their germinability and seeding growth. In control plot, there was little difference of germination percentage among the seed weight classes, but in saline plot, the larger seeds generally had a higher percentage and rate of germination. There occurred synergistic interaction between salinity and temperature in the germination and the increase of temperature enhanced germination of seeds at the same salinity level. Alternating temperature regimes of $15^{\circ}$-$25^{\circ}$C yielded maximum germination and no germination was occurred at $10^{\circ}C$. The germination at alternating temperature showed higher germination percentage than at constant temperature. The percentage and of germination decreased drastically with increased salinity level to 1.00%; no germination was occurred at 1.50% salinity level. The growth fo sddelings from larger seeds was better than that of smaller seeds at the same salinity and temperature. The hypocotyl and radicle were more sensitive than cotyledon to the increased salinity stress.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.171-183
• /
• 2017

Strengthening reinforced concrete (RC) beams with openings by using aramid fiber reinforcement polymers (AFRP) on the beams' surfaces offers a useful solution for upgrading concrete structures to carry heavy loads. This paper presents a repairing technique of the AFRP sheets that effectively strengthens RC beams, controls both the failure modes and the stress distribution around the beam chords and enhances the serviceability (deflection produced under working loads be sufficiently small and cracking be controlled) of pre-cracked RC beams with openings. To investigate the possible damage that was caused by the service load and to simulate the structure behavior in the site, a comprehensive experimental study was performed. Two unstrengthened control beams, four beams that were pre-cracked before the application of the AFRP sheets and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various orientations of AFRP sheets, and then the beams were tested to failure. This load was kept constant during the strengthening process. The results show that both the preexisting damage level and the FRP orientation have a significant effect on strengthening effectiveness and failure mode. All of the strengthened specimens exhibited higher capacities with capacity enhancements ranging from 21.8 to 66.4%, and the crack width reduced by 25.6-82.7% at failure load compared to the control beam. Finally, the authors present a comparison between the experimental results and the predictions using the ACI 440.2R-08 guidelines.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.2
• /
• pp.91-105
• /
• 2015

Jungtaesan and Galpyeongji intrusions in the northeastern Cheongsong occur as laccolith and stock which intrude Gasongdong Formation and Dogyedong Formation, respectively. Cheongsong dike swarm, intruding the Dogyedong Formation, is closely associated with this stock. The dike swarm is more radial to focus into Galpyeongji and its outline is oval. The dikes of the dike swarm are only rhyolite dikes with flow banded, spherulitic and rare stony structures, and represents a single intrusive phase of magma. It can be interpretated that orientation of the dikes is controlled by stress states. Therefore, the dikes display a radial pattern through occupying vertical joints that have been generally attributed to radial fractures formed during doming of the sedimentary rocks by the intrusion of the Galpyeongji stock. The dike pattern could sufficiently account for dike injections into these joints.

• Journal of Korean Academy of Nursing
• /
• v.47 no.6
• /
• pp.756-769
• /
• 2017

Purpose: To identify the effects of a smart program for the patients who underwent percutaneous coronary intervention (SP-PCI) on coronary disease-related knowledge, health behaviors, and quality of life. Methods: A nonequivalent control group with a non-synchronized design was utilized and 48 participants (experimental=22, control=26) were recruited from a university hospital in Gyeongsang area from May to December, 2016. The 12-week SP-PCI consisted of self-study of health information using smart phone applications (1/week), walking exercise (>5/week) using smart band, feedback using Kakao talk (2/week), and telephone counseling (1/week). Patients in the control group received usual care from their primary health care providers and a brief health education with basic self-management brochure after the PCI. Data were analyzed using the SPSS 21.0 program through descriptive statistics, $x^2$ test, and t-test. Results: After the 12-week SP-PCI, the experimental group showed higher levels of coronary disease-related knowledge (t=2.43, p=.019), heart-related health behaviors (t=5.96, p<.001), regular exercise (Z=-4.47, p<.001), and quality of life-MCS (t=3.04, p=.004) and showed lower levels of stress (Z=-3.53, p<.001) and sodium intake (t=-4.43, p<.001) than those in the control group. There were no significant group differences in medication adherence and food intake in total energy, lipids, and cholesterol. Conclusion: The suggested SP-PCI provided easy access and cost-effective intervention for patients after PCI and improved their knowledge of the disease, performance of health behaviors, and quality of life. Further study with a wider population is needed to evaluate the effects of SP-PCI on disease recurrence and quality of life for patients after PCI.