• 제목/요약/키워드: controlled synthesis

검색결과 625건 처리시간 0.03초

Streptomyces fradiae에서 균 성장속도에 의한 tylosin 생합성 조절 (Regulation of Tylosin Biosynthesis by Cell Growth Rate in Streptomyces fradiae)

  • 강현아;이정현;이계준
    • 미생물학회지
    • /
    • 제25권4호
    • /
    • pp.353-359
    • /
    • 1987
  • 균 성장속도가 tylosin 생합성에 미치는 영향을 조사하기 위하여, 여러 성장속도로 배양한 균체내에서 oxaloacetate 대사에 관여하는 효소들의 활성을 살펴보았다. 그 결과, 비 tylosin 생합성 속도($q_{p}$ )는 성장속도 $0.013h^{-1}$까지는 성장속도와 함께 증가하지만, 더 높은 성장속도에선 감소됨을 알 수 있었다. Citrate synthase, aspartate aminotransferase와 PEP carboxylase의 활성 및 합성은 $0.013h^{-1}$ 보다 낮은 성장속도에선 매우 낮게 나타났으며, 반면 methylmaionyl-CoA carboxyltransferase의 활성 및 합성은 tylosin 생합성과 마찬가지로 높은 성장속도에선 감소되었다. 따라서 tylosin 생합성은 균 성장속도에 의해 조절됨을 명백히 알 수 있었다.

  • PDF

Hsp70 분자 샤페론과 조절인자 (Family of Hsp70 Molecular Chaperones and Their Regulators)

  • 정경태
    • 생명과학회지
    • /
    • 제17권12호
    • /
    • pp.1760-1765
    • /
    • 2007
  • 생명체 내에서 일어나는 거의 모든 반응은 단백질이 촉진하거나 수행한다. 단백질은 세포질과 소포체에서 합성될 때 엄격하게 조절된다. 그러나, 새로이 합성된 모든 단백질이 살아남아서 생명을 유지시키는 기능에 관여하게 되지는 않는다. 가장 알맞은 생리학적 in vitro 실험 조건에서 새로이 합성된 단백질의 약 3분의 1 정도는 합성되자마자 proteasome에 의해 빠르게 분해된다고 보고되었다. 또한, 단백질은 합성이 성공적으로 이루어진 이후에는 3차원 구조를 갖기 위해 접힘(folding)이 이루어져야 하고, subunit들은 assembly 과정을 거쳐야 비로소 성숙된 단백질로서 기능을 하게 된다. 어떤 단백질군은 자연적으로 접힘이 일어나는 반면 어떤 단백질군은 분자 샤페론(molecular chaperones)과 folding enzymes의 도움을 받아야만 접힘이 일어난다. 분자 샤페론은 세포 전역에 분포하고 있으며, 세균에서부터 고등 동식물에 이르기까지 모든 생명체에 존재한다. 이들 중 Hsp70군은 많이 연구된 분자 샤페론으로서 지난 10여년 동안 조절인자들이 새로이 발견되어 작용 mechanism이 보다 자세히 밝혀졌다. 본 총설에서 Hsp70군과 그 조절인자들에 대한 전반적인 서술을 하였으며, 이들의 기능이 분자 샤페론 기능 외에 생체 내에서 중요한 기능들이 새롭게 밝혀지고 있어 이들의 작용 mechanism을 조명함으로 이해를 돕고자 한다.

분자영상용 방사성 금 나노입자 합성 (Synthesis of 125I-Labeled Gold Nanoparticles for a Molecular Imaging)

  • 손민주;노종국;이주상;장범수;박상현
    • 방사선산업학회지
    • /
    • 제6권2호
    • /
    • pp.139-145
    • /
    • 2012
  • Gold nanoparticles (GNPs) have led to the development of a new field in the diagnosis and treatment of diseases such as cancer. An efficient synthesis of gold nanoparticles within the range of 8~57 nm was established by ${\gamma}-ray$ irradiation. The good point of a radiation-based method is the production of gold nanoparticles with a higher concentration and narrower size distribution compared with conventional methods. The size of gold nanoparticles was controlled using two methods. : (i) varying the ${\gamma}-ray$ irradiation dose of 10 to 25 kGy and (ii) varying the concentration of $HAuCl_4$ solution from 4 to 40 mM. In addition, the GNPs were radiolabeled using $[^{125}I]NaI$ in a simple and fast manner with high yields. The produced gold nanoparticles were characterized using a transmission electron microscopy (TEM), a UV-visible spectrophotometer, and a radio-TLC imaging scanner. From these results, these radiolabeled GNPs can be applicable for a radioisotope tag of biomolecules.

빔 패턴 성능 분석을 이용한 곡면 배열 형상 설계 (Shape design of conformal array using the beam pattern synthesis)

  • 이근화;신동훈;임준석;홍우영;하용훈
    • 한국음향학회지
    • /
    • 제40권4호
    • /
    • pp.347-358
    • /
    • 2021
  • 본 연구의 목적은 곡면배열이 설치된 이중 곡률을 갖는 곡면의 형상을 최적화하는 것이다. 곡면은 4개의 미지수로 결정되는 이중 타원구로 모델링 하였다. 곡면 배열의 빔 패턴 분석을 통해서 4개의 미지수 중에 2개의 설계 파라미터를 결정했다. 빔 설계 인자의 sharp 지수의 합으로 표현되는 가중치 목적 함수를 정의했다. 각각의 sharp 지수는 여러 빔 설계 인자 중에 지향 지수, 고각 해상도, 방위각 해상도로 정의했다. 가중치가 주어졌을 때, 모든 격자에 대한 직접 계산을 통해 가중치 목적 함수를 평가하고 2개의 설계 파라미터의 최적값을 찾았다. 시뮬레이션에는 총 4종류의 가중치를 사용했다. 각각의 가중치에 대한 최적 곡면 형상 및 빔 패턴 분석 결과를 보였다. 특별히 균등 가중치를 사용했을 때, 다른 가중치를 사용했을 때보다 부드러운 표면을 갖는 이중 타원체의 형상이 얻어졌다.

Metal-organic frameworks-driven ZnO-functionalized carbon nanotube fiber for NO2 sensor

  • Woo, Sungyoon;Jo, Mingyeong;Lee, Joon-Seok;Choi, Seung-Ho;Lee, Sungju;Jeong, Hyeon Su;Choi, Seon-Jin
    • 센서학회지
    • /
    • 제30권6호
    • /
    • pp.369-375
    • /
    • 2021
  • In this study, heterogeneous ZnO/CNTF composites were developed to improve the NO2-sensing response, facilitated by the self-heating property. Highly conductive and mechanically stable CNTFs were prepared by a wet-spinning process assisted by the liquid crystal (LC) behavior of CNTs. Metal-organic frameworks (MOFs) of ZIF-8 were precipitated on the surface of the CNTF (ZIF-8/CNTF) via one-pot synthesis in solution. The subsequent calcination process resulted in the formation of the ZnO/CNTF composites. The calcination temperatures were controlled at 400, 500, and 600 ℃ in an N2 atmosphere to confirm the evolution of the microstructures and NO2-sensing properties. Gas sensor characterization was performed at 100 ℃ by applying a DC voltage to induce Joule heating through the CNTF. The results revealed that the ZnO/CNTF composite after calcination at 500 ℃ (ZnO/CNTF-500) exhibited an improved response (Rair/Rgas = 1.086) toward 20 ppm NO2 as compared to the pristine CNTF (Rair/Rgas = 1.063). Selective NO2-sensing properties were demonstrated with negligible responses toward interfering gas species such as H2S, NH3, CO, and toluene. Our approach for the synthesis of MOF-driven ZnO/CNTF composites can provide a new strategy for the fabrication of wearable gas sensors integrated with textile materials.

요소 산화반응을 위한 NiFe2O4 나노파티클 촉매 합성 및 특성 분석 (Synthesis and characterization of NiFe2O4 nanoparticle electrocatalyst for urea and water oxidation)

  • 윤기용;이경복;김도형;노희윤;최승목;이지훈;정재훈;양주찬
    • 한국표면공학회지
    • /
    • 제56권4호
    • /
    • pp.243-249
    • /
    • 2023
  • Urea oxidation reaction (UOR) via electrochemical oxidation process can replace oxygen evolution reaction (OER) for green hydrogen production since UOR has lower thermodynamic potential (0.37 VRHE) than that of OER (1.23 VRHE). However, in the case of UOR, 6 electrons are required for the entire UOR. For this reason, the reaction rate is slower than OER, which requires 4 electrons. In addition, it is an important challenge to develop catalysts in which both oxidation reactions (UOR and OER) are active since the active sites of OER and UOR are opposite to each other. We prove that among the NiFe2O4 nanoparticles synthesized by the hydrothermal method at various synthesis temperatures, NiFe2O4 nanoparticle with properly controlled particle size and crystallinity can actively operate OER and UOR at the same time.

고속 전력선통신 모뎀용 수신단측 전류모드 대역통과 필터 설계 (Design of A Current-mode Bandpass Filter in Receiver for High speed PLC Modem)

  • 방준호;이우춘
    • 한국산학기술학회논문지
    • /
    • 제13권10호
    • /
    • pp.4745-4750
    • /
    • 2012
  • 본 논문에서는 저전압 저전력 필터 설계에 적합한 전류모드 방식을 이용하여 고속 전력선통신(PLC)모뎀 수 신단의 1MHz~30MHz 차단주파수를 갖는 6차 대역통과 필터를 설계하였다. 3차 바터워스 고역통과 필터와 3차 체비세프 저역통과 필터를 종속연결로 구성하여 대역통과 필터를 설계하였다. 필터를 구성하기 위한 핵심로써 기존의 전류미러형 적분기에 비하여 증가된 이득 및 차단주파수를 가지는 새로운 전류모드 적분기를 설계하였다. 설계된 전류모드 적분기의 이득과 차단주파수는 각각 32.2dB 및 247MHz이였다. 설계된 6차 대역통과 필터의 차단주파수는 제어전압에 따라서 200KHz에서 50MHz까지 조정이 될 수 있으며 소비전력은 공급전압 1.8V에서 2.85mW이였다. 설계된 대역통과 필터는 1.8V, $0.18{\mu}m$ CMOS 공정파라메터를 사용하여 검증되었다.

낮은 위상잡음 특성을 갖는 0.5~4 GHz 주파수 합성기 설계 및 제작 (Design and Fabrication of 0.5~4 GHz Low Phase Noise Frequency Synthesizer)

  • 박범준;박동철
    • 한국전자파학회논문지
    • /
    • 제26권3호
    • /
    • pp.333-341
    • /
    • 2015
  • 본 논문에서는 0.5~4 GHz 주파수 범위에서 낮은 위상잡음 특성을 갖는 광대역 고속 주파수 합성기 구조를 제안하였다. 광대역에서 빠른 동조 속도를 얻기 위해 DDS(Direct Digital Synthesizer)와 아날로그 직접 주파수 합성 기술을 적용하여 주파수 합성기의 출력을 합성하였다. 특히 낮은 위상잡음 특성을 확보하기 위해 DDS 구동에 필요한 2.4 GHz 클럭신호는 SPD(Sample Phase Detector)를 통해 100 MHz 기준 발진기 신호에 위상 고정된 2.4 GHz VCO(Voltage Controlled Oscillator)를 이용하여 발생시켰다. 그리고 광대역 주파수 합성기의 위상잡음 특성을 이론적으로 예측하고, 이를 측정결과와 비교하였다. 제작된 주파수 합성기의 위상잡음은 최고 주파수에서 -121 dBc @ 100 kHz 이하를 갖는다.

마약길항제의 방출 제어형 제제 (제1보) : 생체분해성 polyphosphazenes의 합성과 나록손 이식제제의 제조 및 용출특성 (Controlled Release Dosage Form of Narcotic Antagonist(I): Synthesis of Biodegradable Polyphosphazenes and Preparation and Release Characteristics of Naloxone Implant)

  • 박주애;이승진;김형국;김길수
    • Journal of Pharmaceutical Investigation
    • /
    • 제25권2호
    • /
    • pp.109-116
    • /
    • 1995
  • For the administration of narcotic antagonist with short half-life and low patient compliance, the sustained release system using biodegradable matrix is effective. Polyphosphazenes are of considerable interest as biodegradable matrix systems for controlled release of drugs. In this study, biodegradable polyphosphazenes available for the sustained release implantable device were synthesized, and their application was examined. Poly[dichlorophosphazene] was synthesized by solution polymerization method and confirmed with IR spectrum. Poly[bis(ethyl glycinate) phosphazene] and poly[ (diethyl glutamate)-co-(ethyl glycinate)phosphazene] were then produced by substitution of amino acid alkyl esters for chloride side groups. Using these polymers, the implantable devices of 1 mm thickness and $10{\times}10\;mm$ size containing naloxone hydrochloride were prepared and their release and degradation profiles were measured. In the case of poly[bis(ethyl glycinate)phosphazene] with swelling characteristics, degradation rate was slower than the release rate, showing that the release rate is partly dependent on the swelling rate. In contrast, the degradation rate of polyl[(diethyl glutamate)-co-(ethyl glycinate)phosphazene] matrix was identical with release rate of naloxone hydrochloride. On the basis of these results, it is expected that these polymers can be applied to sustained release implantable systems delivering narcotic antagonist.

  • PDF

지방세포 분화중인 3T3-L1 세포에서 아로마테이즈 siRNA 처리에 의한 지방관련 유전자와 전사인자의 발현 조절 (Adipocyte-Related Genes and Transcription Factors were Affected by siRNA for Aromatase Gene during 3T3-L1 Differentiation)

  • 정동기
    • 생명과학회지
    • /
    • 제18권11호
    • /
    • pp.1600-1605
    • /
    • 2008
  • 본 연구는 에스트로겐 생성효소 유전자인 아로마테이즈 유전자의 siRNA를 이용하여 지방전구세포인 3T3-L1 세포의 지방세포 분화 시 나타나는 유전자의 발현을 검증하기 위하여 수행하였다. 먼저, CYP19A1 (aromatase)의 유전자로부터 siRNA를 3쌍을 디자인하고 이를 지방세포의 전구세포인 3T3-L1세포에 유전자 전이 한 후 분화 유도를 통하여 지방세포 생성의 메커니즘을 분석하였다. 결과적으로 비만의 원인 유전자인 렙틴 유전자의 발현 억제를 유도할 수 있었으며 특이적으로 인슐린과의 연관성이 매우 높음을 밝혀 낼 수 있었다. 그리고 비만 또는 백색지방 생성 시 발현이 억제되는 adiponectin과 adipsin의 과발현을 관찰할 수 있었다. 이 결과를 통하여 지방생성의 모든 신호전달체계 중 특정 한 물질을 저해 하므로써 큰 부작용 없이 비만의 문제가 되는 지방생성을 일정 정도 제어 할 수 있음을 확인 할 수 있었다. 그러므로 이 결과는 앞으로 에스트로겐 결핍 또는 과발현에 의하여 문제가 되는 지방생성 메커니즘을 밝히는 연구에 중요한 단서가 될 것으로 기대된다.