• Nano
• /
• v.13 no.12
• /
• pp.1850141.1-1850141.11
• /
• 2018

Sodium ion batteries based on the more sodium source reserve than that of lithium have been designed as promising alternatives to lithium ion batteries. However, several problems including unsatisfied specific capacity and serious cyclic stability must be solved before the reality. One of the effective approaches to solve the abovementioned problems is to search for suitable anode materials. In this work, we designed and prepared $FeSe_2$ nanoflakes via a simple hydrothermal method which can be adjusted in composition by Fe precursor. As a potential anode for sodium storage, the optimized $FeSe_2$ electrode was further evaluated in different electrolytes of $NaClO_4$ in propylene carbonate/fluoroethylene carbonate and $NaCF_3SO_3$ in diethylene glycol dimethyl ether. The capacity was about $470mAh\;g^{-1}$ and $535mAh\;g^{-1}$ at $0.5A\;g^{-1}$, respectively, in the voltage between 0.5 V and 2.9 V in the cycle of stabilization phase. Superior performance both in capacity and in stability was obtained in ether-based electrolyte, which affords the property without plugging the intermediates of transition metal dichalcogenides during charge/discharge processes.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.463-473
• /
• 2019

Nanoscale zero-valent iron (nZVI) has proved to be an effective tool in applied environmental nanotechnology, where the decreased particle diameter provides a drastic change in the properties and efficiency of nanomaterials used in water purification. However, the agglomeration and colloidal instability represent a problematic and a remarkable reduction in nZVI reactivity. In view of that, this study reports a simple and cost-effective new strategy for ultra-small (< 7.5%) distributed functionalized nZVI-EG (1-9 nm), with high colloidal stability and reduction capacity. These were obtained without inert conditions, using a simple, economical synthesis methodology employing two stabilization mechanisms based on the use of non-aqueous solvent (methanol) and ethylene glycol (EG) as a stabilizer. The information from UV-Vis absorption spectroscopy and Fourier transform infrared spectroscopy suggests iron ion coordination by interaction with methanol molecules. Subsequently, after nZVI formation, particle-surface modification occurs by the addition of the EG. Size distribution analysis shows an average diameter of 4.23 nm and the predominance (> 90%) of particles with sizes < 6.10 nm. Evaluation of the stability of functionalized nZVI by sedimentation test and a dynamic light-scattering technique, demonstrated very high colloidal stability. The ultra-small particles displayed a rapid and high nitrate removal capacity from water.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.419-425
• /
• 2018

In this study, cross-linked collagen gels were successfully prepared with varying of elastic modulus from 0.7 to 17.7 kPa using a chemical cross-linker. Then, human dermal fibroblasts were encapsulated into the porous pores introduced into the gels, and cell growth and behavior were examined by gel's mechanical properties. Specifically, increasing elastic modulus of the gel led to decreases in procollagen synthesis from 47 to 32 ng. In addition, there could be optimum elastic modulus for procollagen production, when the gels were treated with adenosine. However, interestingly, this study discovered that the procollagen production level was not influenced by the elastic modulus of the gel for functional peptide. In conclusion, these results would be highly useful for designing reconstructed skins with varying of elastic modulus to examine functional materials in cosmetics.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.13-21
• /
• 2019

Prussian blue analogues(PBAs) are comprised of cyano-bridged transition metal ions. The wide and unique open-framework structures of the PBAs enable reversible intercalation and deintercalation of various ions such as $Na^+$, $K^+$, $Mg^{2+}$, $Zn^{2+}$, etc. In addition, since PBAs are synthesized through coprecipitation reaction in aqueous solution at room temperature, they are produced economically and environmentally friendly. However, the formation of crystals proceeds rapidly, and defects such as vacancy and crystal water tend to be present in the crystals, thereby affecting key battery performance. Therefore, significant efforts to inhibit defects in PBAs have been made. In the case of vacancy, the reaction rate was controlled at the synthesis stage to reduce the formation of vacancy, and the crystal water was removed by heat treatment under vacuum. In addition, by adding transition metals that do not react within the structure of PBA, the structural instability during the electrochemical reaction was largely alleviated.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.249-258
• /
• 2018

Background: Mucoadhesive polymers, which may increase the contact time between the polymer and the tissue, have been widely investigated for pharmaceutical formulations. In this study, we developed a new polysaccharide-based mucoadhesive polymer with thermogelling properties. Methods: Hexanoyl glycol chitosan (HGC), a new thermogelling polymer, was synthesized by the chemical modification of glycol chitosan using hexanoic anhydride. The HGC was further modified to include thiol groups to improve the mucoadhesive property of thermogelling HGC. The degree of thiolation of the thiolated HGCs (SH-HGCs) was controlled in the range of 5-10% by adjusting the feed molar ratio. The structure of the chemically modified polymers was characterized by $^1H$ NMR and ATR-FTIR. The sol-gel transition, mucoadhesiveness, and biocompatibility of the polymers were determined by a tube inverting method, rheological measurements, and in vitro cytotoxicity tests, respectively. Results: The aqueous solution (4 wt%) of HGC with approximately 33% substitution showed a sol-gel transition temperature of approximately $41^{\circ}C$. SH-HGCs demonstrated lower sol-gel transition temperatures ($34{\pm}1$ and $31{\pm}1^{\circ}C$) compared to that of HGC due to the introduction of thiol groups. Rheological studies of aqueous mixture solutions of SH-HGCs and mucin showed that SH-HGCs had stronger mucoadhesiveness than HGC due to the interaction between the thiol groups of SH-HGCs and mucin. Additionally, we confirmed that the thermogelling properties might improve the mucoadhesive force of polymers. Several in vitro cytotoxicity tests showed that SH-HGCs showed little toxicity at concentrations of 0.1-1.0 wt%, indicating good biocompatibility of the polymers. Conclusions: The resultant thiolated hexanoyl glycol chitosans may play a crucial role in mucoadhesive applications in biomedical areas.

• Journal of Powder Materials
• /
• v.29 no.2
• /
• pp.118-122
• /
• 2022

The synthesis of porous W by freeze-casting and vacuum drying is investigated. Ball-milled WO₃ powders and tert-butyl alcohol were used as the starting materials. The tert-butyl alcohol slurry is frozen at -25℃ and dried under vacuum at -25 and -10℃. The dried bodies are hydrogen-reduced at 800℃ and sintered at 1000℃. The XRD analysis shows that WO₃ is completely reduced to W without any reaction phases. SEM observations reveal that the struts and pores aligned in the tert-butyl alcohol growth direction, and the change in the powder content and drying temperature affects the pore structure. Furthermore, the struts of the porous body fabricated under vacuum are thinner than those fabricated under atmospheric pressure. This behavior is explained by the growth mechanism of tert-butyl alcohol and rearrangement of the powders during solidification. These results suggest that the pore structure of a porous body can be controlled by the powder content, drying temperature, and pressure.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.3
• /
• pp.77-84
• /
• 2022

Objectives This study is designed to identify the effectiveness of herbal medicine for osteoporosis in rheumatoid arthritis. Methods We will investigate 10 databases, 4 Korean databases (KoreaMed, KMBASE, Koreanstudies Information Service System [KISS], ScienceOn) and 6 of abroad (PubMed, EMBASE, Cochrane Library, China National Knowledge Infrastructure [CNKI], WanFang, Citation Information by NII [CiNii]) without publication date, language limitation for clinical study of herbal medicine for osteoporosis in rheumatoid arthritis. Type, dose, duration, frequency of herb medicine will be analyzed. Results Randomized controlled trials about herbal medicine or herb extract for osteoporosis in rheumatoid arthritis should be included in the study. Cochrane's risk of bias tools will be used to assess quality of the study. Mean differences or standardized mean differences of 95% confidence intervals will calculated and data synthesis will be conducted using Review Manager (RevMan, ver.5.3; The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). Conclusions It is expected to provide basic data for the active use of herb medicine by systematically synthesizing and analyzing the actual situation, effectiveness, and safety of herb medicine for osteoporosis in rheumatoid arthritis.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.501-519
• /
• 2003

Silk Sericin(SS) is a natural protein extracted from cocoon of bombix mori and shows moisturizing effect to the skin due to a number of hydroxyl groups in the structure. But its application to cosmetics is limited due to its poor solubility in water. In order to solve this drawback and expand its application to cosmetics, polyethyleneglycol(PEG) was conjugated with sericin by reacting activated polyethyleneglycol(ActPEG). Reaction site of sericin is tyrosine residue, which was determined by using $^1$H-NMR. Random coil structure of sericin was transformed to beta-sheet structure by conjugating polyethyleneglycol. It was confirmed that melting point of sericin-PEG conjugate was lowered compared to that of each sericin and PEG due to the interaction between sericin and PEG in crystalline structure. Self-assembled sericin-PEG nanoparticle was obtained by dialyzing with alcohol solution of sericin-PEG conjugate against water. The particle is spherical and has 200-400nm of size. The moisturizing ability of sericin-PEG nanoparticle was much higher than that of sericin itself. Incorporation of vitamin A into sericin-PEG nanoparticle was carried out by diafiltration method. The content of incorporated Vitamin A in sericin-PEG nanoparticle was 8.9 wt％. Releasing behaviour of vitamin A incorporated into nanoparticle was tested in phosphate buffer, pH 7.4 at 37$^{\circ}C$. and half-life of Vitamin A release was 43hrs. Sericin-PEG nanoparticle exhibited higher moisturing effect than sericin itself and distilled water, respectively. No toxicity and irritation were observed in animal tests. It can be expected that the self-assembled sericin-PEG nanoparticle can be developed for cosmetics.

• Journal of Convergence Korean Medicine
• /
• v.5 no.1
• /
• pp.5-23
• /
• 2023

Objectives: This study was conducted to evaluate the effect of combination treatment of herbal medicine for external use and western medicine for atopic dermatitis (AD). Methods: We searched randomized controlled trials (RCTs) which assess the effect of combination treatment of herbal and western medicine for AD through 8 electronic databases from the start to December 2022. The data synthesis was conducted by using Review Manager (RevMan, ver.5.4.1) and Cochrane risk-of-bias tool was used to evaluate the risk of bias. Results: 13 RCTs were included. The combination treatment group had significantly higher total efficacy rate(p<0.0001) and lower SCORAD score (p<0.00001) than the western medicine treatment group. The adverse event rate was also significantly lower in the combination treatment than the western medicine treatment group (p<0.0001). But there was no significant difference in recurrence rate (p=0.09). Conclusion: This study demonstrates that the combination treatment of herbal and western medicine could be safe and effective for AD. However, due to limits of included studies such as high heterogeneity between the literature and unclear risk of bias, further studies are warranted.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.36 no.3
• /
• pp.74-98
• /
• 2023

Objectives : This study aims to evaluate the add-on effect of herbal bath combined with acitretin in patients with psoriasis. Methods : We searched randomized controlled trials(RCTs) reporting the effect of herbal bath and acitretin combined treatment for psoriasis in 10 electronic databases from their inception to January 2023. Study collection, data extraction, and risk of bias assessment were performed by two independent researchers. Data synthesis and risk of bias evaluation was conducted using Revman 5.4. Results : Ten RCTs with 1,008 subjects were included. Herbal bath and acitretin combined treatment group showed higher average total effective rate than acitretin alone group(RR 1.39; 95% CI: 1.15-1.68, P=0.0006, I² =0%). Herbal bath and additional treatments such as phototherapy(NB-UVB) and oral herbal medicine, combined with acitretin group also showed higher average total effective rate than acitretin alone group(RR 1.81; 95% CI: 1.47-2.22, P<0.00001, I² =43%). Herbal bath and phototherapy(NB-UVB) combined with acitretin group also showed higher average total effective rate than acitretin alone group(RR 1.51; 95% CI: 1.18-1.93, P=0.0009, I² =0%). The overall risk of bias of the included studies was unclear or of high risks. Conclusions : This review showed that the add-on of herbal bath combined with acitretin treatment could be more effective than acitretin alone treatment in patients with psoriasis. However, because of few included studies, heterogeneity between studies, and insufficient quality of included studies, further well-designed RCTs are needed to confirm the add-on effect of herbal bath on psoriasis.